Victory ship

The Victory ship was a class of cargo ship produced in large numbers by North American shipyards during World War II to replace losses caused by German submarines. They were a more modern design compared to the earlier Liberty ship, were slightly larger and had more powerful steam turbine engines giving higher speed to allow participation in high speed convoys and make them more difficult targets for German U-boats. A total of 531 Victory ships were built.[3][4]

SS Red Oak Victory, now a museum ship
Class overview
Name: Victory ship
Builders: 6 shipyards in the US
Planned: 615
Completed: 534
Cancelled: 81
Preserved: 3
General characteristics
Class and type: Cargo ship
Displacement: 15,200 tons[2] (at 28-foot draft)[1]
Length: 455 ft (138.7 m)[1]
Beam: 62 ft (18.9 m)[1]
Draft: 28 ft (8.5 m)[1]
Depth of hold: 38 ft (11.6 m)[1]
  • oil-fired boilers
  • steam engine
  • single screw
Speed: 15–17 knots (28–31 km/h)

VC2 design

One of the first acts of the United States War Shipping Administration upon its formation in February 1942 was to commission the design of what came to be known as the Victory class. Initially designated EC2-S-AP1, where EC2 = Emergency Cargo, type 2 (Load Waterline Length between 400 and 450 feet (120 and 140 m)), S = steam propulsion with AP1 = one aft propeller (EC2-S-C1 had been the designation of the Liberty ship design), it was changed to VC2-S-AP1 before the name "Victory Ship" was officially adopted on 28 April 1943. The ships were built under the Emergency Shipbuilding program.[1]

The design was an enhancement of the Liberty ship, which had been successfully produced in extraordinary numbers. Victory ships were slightly larger than Liberty ships, 14 feet (4.3 m) longer at 455 feet (139 m), 6 feet (1.8 m) wider at 62 ft (19 m), and drawing one foot more at 28 feet (8.5 m) loaded.[1] Displacement was up just under 1,000 tons, to 15,200. With a raised forecastle and a more sophisticated hull shape to help achieve the higher speed, they had a quite different appearance from Liberty ships.

To make them less vulnerable to U-boat attacks, Victory ships made 15 to 17 knots (28 to 31 km/h), 4 to 6 knots (7.4 to 11.1 km/h) faster than the Libertys, and had longer range. The extra speed was achieved through more modern, efficient engines. Rather than the Libertys' 2,500 horsepower (1,900 kW) triple expansion steam engines, Victory ships were designed to use either Lentz type reciprocating steam engines, steam turbines or Diesel engines, variously putting out between 6,000 and 8,500 hp (4,500 and 6,300 kW). Most used steam turbines, which had been in short supply earlier in the war and reserved for warships. All were oil-fired, but for a handful of Canadian vessels completed with both coal bunkers and oil tanks. Another improvement was electrically powered auxiliary equipment, rather than steam-driven machinery.

To prevent the hull fractures that a few Liberty ships developed, the spacing between frames was widened by 6 inches (150 mm), to 36 inches (910 mm), making the ships less stiff. The hull was welded not riveted.[5]

The VC2-S-AP2, VC2-S-AP3, and VC2-M-AP4 were armed with a 5-inch (127 mm)/38 caliber stern gun for use against submarines and surface ships, and a bow-mounted 3-inch (76 mm)/50 caliber gun and eight 20 mm cannon for use against aircraft. These were manned by United States Navy Armed Guard personnel. The VC2-S-AP5 Haskell-class attack transports were armed with the 5-inch stern gun, one quad 40 mm Bofors cannon, four dual 40 mm Bofors cannon, and ten single 20 mm cannon. The Haskells were operated and crewed exclusively by U.S. Navy personnel.

The Victory ship was noted for good proportion of cubic between holds for a cargo ship of its day. A Victory ship's cargo hold one, two and five hatches are a single rigged with a capacity of 70,400, 76,700, and 69,500 bale cubic feet respectively. Victory ship's hold three and four hatches are double rigged with a capacity of 136,100 and 100,300 bale cubic feet respectively.[6] Victory ships have built in mast, booms and derrick cranes and can load and unload their own cargo without dock side cranes or gantry if needed.[7]


The first vessel was SS United Victory launched at Oregon Shipbuilding Corporation on 12 January 1944 and completed on 28 February 1944, making her maiden voyage a month later. American vessels frequently had a name incorporating the word "Victory". The British and Canadians used "Fort" and "Park" respectively. After United Victory, the next 34 vessels were named after allied countries, the following 218 after American cities, the next 150 after educational institutions and the remainder given miscellaneous names. The AP5 type attack transports were named after United States counties, without "Victory" in their name, with the exception of USS Marvin H. McIntyre, which was named after President Roosevelt's late personal secretary.

Although initial deliveries were slow—only 15 had been delivered by May 1944—by the end of the war 531 had been constructed. The Commission cancelled orders for a further 132 vessels, although three were completed in 1946 for the Alcoa Steamship Company, making a total built in the United States of 534, made up of:

US Victory ship production
Type Notes
272 VC2-S-AP2 6,000 hp (4.5 MW) general cargo vessels
141 VC2-S-AP3 8,500 hp (6.3 MW) vessels
1 VC2-M-AP4 Diesel
117 VC2-S-AP5 Haskell-class attack transports
3VC2-S-AP7 Post war completion

Of the wartime construction, 414 were of the standard cargo variant and 117 were attack transports.[1] Because the Atlantic battle had been won by the time that the first of the Victory ships appeared none were sunk by U-boats. Three were sunk by Japanese kamikaze attack in April 1945.

Many Victory ships were converted to troopships to bring US soldiers home at the end of World War II as part of Operation Magic Carpet. A total of 97 Victory ships were converted to carry up to 1,600 soldiers. To convert the ships the cargo hold were converted to bunk beds and hammocks stacked three high for hot bunking, Mess halls and exercise places were also added.[8] Some examples of Victory troopship are: SS Aiken Victory, SS Chanute Victory, SS Cody Victory, SS Colby Victory, SS Cranston Victory, SS Gustavus Victory, SS Hagerstown Victory, SS Maritime Victory, and SS U.S.S.R. Victory.[9][10][11][12][13]

Some 36 Victory ships continued in service and served in the Korean War and a 100 Victory ships served in the Vietnam War. Many were sold and became commercial cargo ships and a few commercial passenger ship. Some were laid up the United States Navy reserve fleets and then scrapped or reused. Many saw postwar conversion and various uses for years afterward. The single VC2-M-AP4 Diesel-powered Emory Victory operated in Alaskan waters for the Bureau of Indian Affairs as North Star III.[1] AP3 types South Bend Victory and Tuskegee Victory were converted in 1957–58 to ocean hydrographic surveying ships USNS Bowditch and Dutton, respectively.[1] Dutton aided in locating the lost hydrogen bomb following the 1966 Palomares B-52 crash.[14]

Starting in 1959, several were removed from the reserve fleet and refitted for the National Aeronautics and Space Administration. One such ship was SS Kingsport Victory, which was renamed USNS Kingsport and converted into the world's first satellite communications ship. Another was the former Haiti Victory, which recovered the first man-made object to return from orbit, the nose cone of Discoverer 13, on 11 August 1960. USS Sherburne was converted in 1969–1970 to the range instrumentation ship USNS Range Sentinel for downrange tracking of ballistic missile tests.[1]

Four Victory ships became fleet ballistic missile cargo ships transporting torpedoes, Poseidon missiles, packaged petroleum, and spare parts to deployed submarine tenders:[1]

  • USNS Norwalk, built as SS Norwalk Victory
  • USNS Furman, built as SS Furman Victory
  • USNS Victoria, built as SS Ethiopia Victory
  • USNS Marshfield, built as SS Marshfield Victory

In the 1960s two Victory ships were reactivated and converted to technical research ships by the U.S. Navy with the hull type AGTR. SS Iran Victory became USS Belmont and SS Simmons Victory became USS Liberty. Liberty was attacked and severely damaged by Israeli forces in June 1967 and subsequently decommissioned and struck from the Naval Register. Belmont was decommissioned and stricken in 1970. Baton Rouge Victory was sunk in the Mekong delta by a Viet Cong mine in August 1966 and temporarily blocked the channel to Saigon.[1]


Most Victory ships were constructed in six West Coast and one Baltimore emergency shipyards that were set up in World War II to build Liberty, Victory, and other ships. The Victory ship was designed to be able to be assembled by the smallest capacity crane at these shipyards.[1] Some ships were built in Britain and Canada.

US shipyard production of Victory ships[15][16]
Shipyard Location Quantity
Type Quantity
MCV Hull Numbers Notes
Bethlehem Fairfield Baltimore, Maryland 94   VC2-S-AP293   602–653, 816–856 23 more cancelled
VC2-M-AP41   654 Diesel engine variant
California Shipbuilding Wilmington, California 131   VC2-S-AP332   1–24, 27, 29, 31–33, 37, 41, 42
VC2-S-AP530   25, 26, 28, 30, 34–36, 38–40, 43–62 63–66 Transferred to Vancouver as 812–815
VC2-S-AP269   67–84, 767–811, 885–890 10 more cancelled
Kaiser Shipbuilding Vancouver, Washington 31   VC2-S-AP531   655–681, 812–815 17 more cancelled
Oregon Shipbuilding Portland, Oregon 136   VC2-S-AP399   85–116, 147–189, 682–701, 872–875 19 more cancelled
VC2-S-AP534   117–146, 860–863 12 more cancelled
VC2-S-AP71   866 Originally AP5
VC2-S1-AP72   876, 877 Originally AP3
Permanente/Kaiser Yard #1 (See Richmond Shipyards) Richmond, California 53   VC2-S-AP310   525–534
VC2-S-AP243   535–550, 581–596, 702–711
Permanente/Kaiser Yard #2 89   VC2-S-AP522   552–573
VC2-S-AP267   574–580, 597–601, 712–766

Ships in class

Status of remaining Victory ships

Three are open for tours as museum ships:

See also


  1. Culver, John A., CAPT USNR "A time for Victories" United States Naval Institute Proceedings February 1977 pp. 50–56
  2. What kind of tons? Liberty ship article specifies long tons.
  3. Jaffee, Capt. Walter W., The Lane Victory: The Last Victory Ship in War and in Peace, 2nd ed., p. 14, The Glencannon Press, Palo Alto, CA, 1997.
  4. MARAD, Victory Ship, U.S. Maritime Commission design type VC2-S-AP2
  5. "Victory Ship Design".
  6. An Analysis of General Cargo Handing Problems, Developments, and Proffered Solutions, BY L. H. QUACKENBUSH, ASSOCIATE
  7. "Cargo hold tour, SS Lane". Archived from the original on 2 August 2016. Retrieved 9 January 2017.
  8. Chapter 2 After ASTP, Across the Atlantic to England Under Siege, By Lester Segarnick
  9. crossings in 1945
  10. Troop Ship of World War II, April 1947, Page 356-357
  11. 69th infantry division, newsletter, 1986
  12. The Nebraska State Journal from Lincoln, Nebraska, December 26, 1945, Page 4
  13. Binghamton NY Press Grayscale 1945 – Fulton History, Oct. 15, 1945
  14. Melson, Lewis B., CAPT USN "Contact 261" United States Naval Institute Proceedings June 1967
  15. "WWII Construction Records – Private-Sector Shipyards that Built Ships for the U.S. Maritime Commission". Archived from the original on 23 October 2006. Retrieved 3 November 2006.
  16. "Victory Ships built by the United States Maritime Commission during World War II – Listed by Shipyard". Retrieved 4 November 2006.
  17. The Sian Yung, by: Charles W. Hummer, Jr., BHS '55
  18. Sian Yung Sinks in the Canal by C. W. “Chuck” Hummer, Jr.
  19. Sian Yung sunk in the Culebra Cut


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.