Universal Character Set characters
The Unicode Consortium (UC) and the International Organisation for Standardisation (ISO) collaborate on the Universal Character Set (UCS). The UCS is an international standard to map characters used in natural language, mathematics, music, and other domains to machine readable values. By creating this mapping, the UCS enables computer software vendors to interoperate and transmit UCS encoded text strings from one to another. Because it is a universal map, it can be used to represent multiple languages at the same time. This avoids the confusion of using multiple legacy character encodings, which can result in the same sequence of codes having multiple meanings and thus be improperly decoded if the wrong one is chosen.
UCS has a potential capacity to encode over 1 million characters. Each UCS character is abstractly represented by a code point, which is an integer between 0 and 1,114,111, used to represent each character within the internal logic of text processing software (1,114,112 = 2²⁰ + 2¹⁶ or 17 × 2¹⁶, or hexadecimal 110,000 code points). As of Unicode 12.1, released in May 2019, 281,392 (25%) of these code points are allocated, including 137,994 (12%) assigned characters, 137,468 (12.3%) reserved for private use, 2,048 for surrogates, and 66 designated non-characters, leaving 832,720 (75%) unallocated. The number of encoded characters is made up as follows:
- 137,766 graphical characters (some of which do not have a visible glyph, but are still counted as graphical)
- 228 special purpose characters for control and formatting.
ISO maintains the basic mapping of characters from character name to code point. Often the terms "character" and "code point" will get used interchangeably. However, when a distinction is made, a code point refers to the integer of the character: what one might think of as its address. While a character in UCS 10646 includes the combination of the code point and its name, Unicode adds many other useful properties to the character set, such as block, category, script, and directionality.
In addition to the UCS, Unicode also provides other implementation details such as:
- transcending mappings between UCS and other character sets
- different collations of characters and character strings for different languages
- an algorithm for laying out bidirectional text, where text on the same line may shift between left-to-right and right-to-left
- a case folding algorithm
Computer software end users enter these characters into programs through various input methods. Input methods can be through keyboard or a graphical character palette.
The UCS can be divided in various ways, such as by plane, block, character category, or character property.
Character reference overview
where nnnn is the code point in decimal form, and hhhh is the code point in hexadecimal form. The x must be lowercase in XML documents. The nnnn or hhhh may be any number of digits and may include leading zeros. The hhhh may mix uppercase and lowercase, though uppercase is the usual style.
In contrast, a character entity reference refers to a character by the name of an entity which has the desired character as its replacement text. The entity must either be predefined (built into the markup language) or explicitly declared in a Document Type Definition (DTD). The format is the same as for any entity reference:
where name is the case-sensitive name of the entity. The semicolon is required.
Unicode and ISO divide the set of code points into 17 planes, each capable of containing 65536 distinct characters or 1,114,112 total. As of 2019 (Unicode 12.1) ISO and the Unicode Consortium has only allocated characters and blocks in six of the 17 planes. The others remain empty and reserved for future use.
Most characters are currently assigned to the first plane: the Basic Multilingual Plane. This is to help ease the transition for legacy software since the Basic Multilingual Plane is addressable with just two octets. The characters outside the first plane usually have very specialized or rare use.
Each plane corresponds with the value of the one or two hexadecimal digits (0—9, A—F) preceding the four final ones: hence U+24321 is in Plane 2, U+4321 is in Plane 0 (implicitly read U+04321), and U+10A200 would be in Plane 16 (hex 10 = decimal 16). Within one plane, the range of code points is hexadecimal 0000—FFFF, yielding a maximum of 65536 code points. Planes restrict code points to a subset of that range.
Unicode adds a block property to UCS that further divides each plane into separate blocks. Each block is a grouping of characters by their use such as "mathematical operators" or "Hebrew script characters". When assigning characters to previously unassigned code points, the Consortium typically allocates entire blocks of similar characters: for example all the characters belonging to the same script or all similarly purposed symbols get assigned to a single block. Blocks may also maintain unassigned or reserved code points when the Consortium expects a block to require additional assignments.
The first 256 code points in the UCS correspond with those of ISO 8859-1, the most popular 8-bit character encoding in the Western world. As a result, the first 128 characters are also identical to ASCII. Though Unicode refers to these as a Latin script block, these two blocks contain many characters that are commonly useful outside of the Latin script. In general, not all characters in a given block need be of the same script, and a given script can occur in several different blocks.
Unicode assigns to every UCS character a general category and subcategory. The general categories are: letter, mark, number, punctuation, symbol, or control (in other words a formatting or non-graphical character).
- Modern, Historic, and Ancient Scripts. As of 2019 (Unicode 12.1), the UCS identifies 150 scripts that are, or have been, used throughout of the world. Many more are in various approval stages for future inclusion of the UCS.
- International Phonetic Alphabet. The UCS devotes several blocks (over 300 characters) to characters for the International Phonetic Alphabet.
- Combining Diacritical Marks. An important advance conceived by Unicode in designing the UCS and related algorithms for handling text, was the introduction of combining diacritic marks. By providing accents that can combine with any letter character, the Unicode and the UCS reduce significantly the number of characters needed. While the UCS also includes precomposed characters, these were included primarily to facilitate support within UCS for non-Unicode text processing systems.
- Punctuation. Along with unifying diacritical marks, the UCS also sought to unify punctuation across scripts. Many scripts also contain punctuation, however, when that punctuation has no similar semantics in other scripts.
- Symbols. Many mathematics, technical, geometrical and other symbols are included within the UCS. This provides distinct symbols with their own code point or character rather than relying on switching fonts to provide symbolic glyphs.
- Letterlike. These symbols appear like combinations of many common Latin scripts letters such as ℅. Unicode designates many of the letterlike symbols as compatibility characters usually because they can be in plain text by substituting glyphs for a composing sequence of characters: for example substituting the glyph ℅ for the composed sequence of characters c/o.
- Number Forms. Number forms primarily consist of precomposed fractions and Roman numerals. Like other areas of composing sequences of characters, the Unicode approach prefers the flexibility of composing fractions by combining characters together. In this case to create fractions, one combines numbers with the fraction slash character (U+2044). As an example of the flexibility this approach provides, there are nineteen precomposed fraction characters included within the UCS. However, there are an infinity of possible fractions. By using composing characters the infinity of fractions is handled by 11 characters (0-9 and the fraction slash). No character set could include code points for every precomposed fraction. Ideally a text system should present the same glyphs for a fraction whether it is one of the precomposed fractions (such as ⅓) or a composing sequence of characters (such as 1⁄3). However, web browsers are not typically that sophisticated with Unicode and text handling. Doing so ensures that precomposed fractions and combining sequence fractions will appear compatible next to each other.
- Geometric Shapes.
- Control Pictures Graphical representations of many control characters.
- Box Drawing.
- Block Elements.
- Braille Patterns.
- Optical Character Recognition.
- Miscellaneous Symbols.
- Symbols and Pictographs.
- Alchemical Symbols.
- Game Pieces (chess, checkers, go, dice, dominoes, mahjong, playing cards, and many others).
- Chess Symbols
- Tai Xuan Jing.
- Yijing Hexagram Symbols.
- CJK. Devoted to ideographs and other characters to support languages in China, Japan, Korea (CJK), Taiwan, Vietnam, and Thailand.
- Radicals and Strokes.
- Ideographs. By far the largest portion of the UCS is devoted to ideographs used in languages of Eastern Asia. While the glyph representation of these ideographs have diverged in the languages that use them, the UCS unifies these Han characters in what Unicode refers to as Unihan (for Unified Han). With Unihan, the text layout software must work together with the available fonts and these Unicode characters to produce the appropriate glyph for the appropriate language. Despite unifying these characters, the UCS still includes over 87000 Unihan ideographs.
- Musical Notation.
- Duployan shorthands.
- Sutton SignWriting.
- Compatibility Characters. Several blocks in the UCS are devoted almost entirely to compatibility characters. Compatibility characters are those included for support of legacy text handling systems that do not make a distinction between character and glyph the way Unicode does. For example, many Arabic letters are represented by a different glyph when the letter appears at the end of a word than when the letter appears at the beginning of a word. Unicode's approach prefers to have these letters mapped to the same character for ease of internal machine text processing and storage. To complement this approach, the text software must select different glyph variants for display of the character based on its context. Over 4000 characters are included for such compatibility reasons.
- Control Characters.
- Surrogates. The UCS includes 2048 code points in the Basic Multilingual Plane (BMP) for surrogate code point pairs. Together these surrogates allow any code point in the sixteen other planes to be addressed by using two surrogate code points. This provides a simple built-in method for encoding the 20.1 bit UCS within a 16 bit encoding such as UTF-16. In this way UTF-16 can represent any character within the BMP with a single 16-bit byte. Characters outside the BMP are then encoded using two 16-bit bytes (4 octets total) using the surrogate pairs.
- Private Use. The consortium provides several private use blocks and planes that can be assigned characters within various communities, as well as operating system and font vendors.
- Non-characters. The consortium guarantees certain code points will never be assigned a character and calls these non-character code points. The last two code points of each plane (ending in FE and FF ) are such code points. There are a few others interspersed throughout the Basic Multilingual Plane, the first plane.
Unicode codifies over a hundred thousand characters. Most of those represent graphemes for processing as linear text. Some, however, either do not represent graphemes, or, as graphemes, require exceptional treatment. Unlike the ASCII control characters and other characters included for legacy round-trip capabilities, these other special-purpose characters endow plain text with important semantics.
Some special characters can alter the layout of text, such as the zero-width joiner and zero-width non-joiner, while others do not affect text layout at all, but instead affect the way text strings are collated, matched or otherwise processed. Other special-purpose characters, such as the mathematical invisibles, generally have no effect on text rendering, though sophisticated text layout software may choose to subtly adjust spacing around them.
Unicode does not specify the division of labor between font and text layout software (or "engine") when rendering Unicode text. Because the more complex font formats, such as OpenType or Apple Advanced Typography, provide for contextual substitution and positioning of glyphs, a simple text layout engine might rely entirely on the font for all decisions of glyph choice and placement. In the same situation a more complex engine may combine information from the font with its own rules to achieve its own idea of best rendering. To implement all recommendations of the Unicode specification, a text engine must be prepared to work with fonts of any level of sophistication, since contextual substitution and positioning rules do not exist in some font formats and are optional in the rest. The fraction slash is an example: complex fonts may or may not supply positioning rules in the presence of the fraction slash character to create a fraction, while fonts in simple formats cannot.
Byte order mark
When appearing at the head of a text file or stream, the byte order mark (BOM) U+FEFF hints at the encoding form and its byte order.
If the stream's first byte is 0xFE and the second 0xFF, then the stream's text is not likely to be encoded in UTF-8, since those bytes are invalid in UTF-8. It is also not likely to be UTF-16 in little-endian byte order because 0xFE, 0xFF read as a 16-bit little endian word would be U+FFFE, which is meaningless. The sequence also has no meaning in any arrangement of UTF-32 encoding, so, in summary, it serves as a fairly reliable indication that the text stream is encoded as UTF-16 in big-endian byte order. Conversely, if the first two bytes are 0xFF, 0xFE, then the text stream may be assumed to be encoded as UTF-16LE because, read as a 16-bit little-endian value, the bytes yield the expected 0xFEFF byte order mark. This assumption becomes questionable, however, if the next two bytes are both 0x00; either the text begins with a null character (U+0000), or the correct encoding is actually UTF-32LE, in which the full 4-byte sequence FF FE 00 00 is one character, the BOM.
The UTF-8 sequence corresponding to U+FEFF is 0xEF, 0xBB, 0xBF. This sequence has no meaning in other Unicode encoding forms, so it may serve to indicate that that stream is encoded as UTF-8.
The Unicode specification does not require the use of byte order marks in text streams. It further states that they should not be used in situations where some other method of signaling the encoding form is already in use.
Primarily for mathematics, the Invisible Separator (U+2063) provides a separator between characters where punctuation or space may be omitted such as in a two-dimensional index like ij. Invisible Times (U+2062) and Function Application (U+2061) are useful in mathematics text where the multiplication of terms or the application of a function is implied without any glyph indicating the operation. Unicode 5.1 introduces the Mathematical Invisible Plus character as well (U+2064) which may indicate that an integral number followed by a fraction should denote their sum, but not their product.
The standard form of a fraction built using the fraction slash is defined as follows: any sequence of one or more decimal digits (General Category = Nd), followed by the fraction slash, followed by any sequence of one or more decimal digits. Such a fraction should be displayed as a unit, such as ¾. If the displaying software is incapable of mapping the fraction to a unit, then it can also be displayed as a simple linear sequence as a fallback (for example, 3/4). If the fraction is to be separated from a previous number, then a space can be used, choosing the appropriate width (normal, thin, zero width, and so on). For example, 1 + ZERO WIDTH SPACE + 3 + FRACTION SLASH + 4 is displayed as 1¾.
By following this Unicode recommendation, text processing systems yield sophisticated symbols from plain text alone. Here the presence of the fraction slash character instructs the layout engine to synthesize a fraction from all consecutive digits preceding and following the slash. In practice, results vary because of the complicated interplay between fonts and layout engines. Simple text layout engines tend not to synthesize fractions at all, and instead draw the glyphs as a linear sequence as described in the Unicode fallback scheme.
More sophisticated layout engines face two practical choices: they can follow Unicode's recommendation, or they can rely on the font's own instructions for synthesizing fractions. By ignoring the font's instructions, the layout engine can guarantee Unicode's recommended behavior. By following the font's instructions, the layout engine can achieve better typography because placement and shaping of the digits will be tuned to that particular font at that particular size.
The problem with following the font's instructions is that the simpler font formats have no way to specify fraction synthesis behavior. Meanwhile, the more complex formats do not require the font to specify fraction synthesis behavior and therefore many do not. Most fonts of complex formats can instruct the layout engine to replace a plain text sequence such as "1⁄2" with the precomposed "½" glyph. But because many of them will not issue instructions to synthesize fractions, a plain text string such as "221⁄225" may well render as 22½25 (with the ½ being the substituted precomposed fraction, rather than synthesized). In the face of problems like this, those who wish to rely on the recommended Unicode behavior should choose fonts known to synthesize fractions or text layout software known to produce Unicode's recommended behavior regardless of font.
Bidirectional neutral formatting
Writing direction is the direction glyphs are placed on the page in relation to forward progression of characters in the Unicode string. English and other languages of Latin script have left-to-right writing direction. Several major writing scripts, such as Arabic and Hebrew, have right-to-left writing direction. The Unicode specification assigns a directional type to each character to inform text processors how sequences of characters should be ordered on the page.
While lexical characters (that is, letters) are normally specific to a single writing script, some symbols and punctuation marks are used across many writing scripts. Unicode could have created duplicate symbols in the repertoire that differ only by directional type, but chose instead to unify them and assign them a neutral directional type. They acquire direction at render time from adjacent characters. Some of these characters also have a bidi-mirrored property indicating the glyph should be rendered in mirror-image when used in right-to-left text.
The render-time directional type of a neutral character can remain ambiguous when the mark is placed on the boundary between directional changes. To address this, Unicode includes characters that have strong directionality, have no glyph associated with them, and are ignorable by systems that do not process bidirectional text:
- Arabic letter mark (U+061C)
- Left-to-right mark (U+200E)
- Right-to-left mark (U+200F)
Surrounding a bidirectionally neutral character by the left-to-right mark will force the character to behave as a left-to-right character while surrounding it by the right-to-left mark will force it to behave as a right-to-left character. The behavior of these characters is detailed in Unicode's Bidirectional Algorithm.
Bidirectional general formatting
While Unicode is designed to handle multiple languages, multiple writing systems and even text that flows either left-to-right or right-to-left with minimal author intervention, there are special circumstances where the mix of bidirectional text can become intricate—requiring more author control. For these circumstances, Unicode includes five other characters to control the complex embedding of left-to-right text within right-to-left text and vice versa:
- Left-to-right embedding (U+202A)
- Right-to-left embedding (U+202B)
- Pop directional formatting (U+202C)
- Left-to-right override (U+202D)
- Right-to-left override (U+202E)
- Left-to-right isolate (U+2066)
- Right-to-left isolate (U+2067)
- First strong isolate (U+2068)
- Pop directional isolate (U+2069)
Interlinear annotation characters
- Interlinear Annotation Anchor (U+FFF9)
- Interlinear Annotation Separator (U+FFFA)
- Interlinear Annotation Terminator (U+FFFB)
- Prefixed format control
- Arabic Number Sign (U+0600)
- Arabic Sign Sanah (U+0601)
- Arabic Footnote Marker (U+0602)
- Arabic Sign Safha (U+0603)
- Arabic Sign Samvat (U+0604)
- Arabic Number Mark Above (U+0605)
- Arabic End of Ayah (U+06DD)
- Syriac Abbreviation Mark (U+070F)
- Kaithi Number Sign (U+110BD)
- Kaithi Number Sign Above (U+110CD)
- Egyptian Hieroglyphs
- Egyptian Hieroglyph Vertical Joiner (U+13430)
- Egyptian Hieroglyph Horizontal Joiner (U+13431)
- Egyptian Hieroglyph Insert At Top Start (U+13432)
- Egyptian Hieroglyph Insert At Bottom Start (U+13433)
- Egyptian Hieroglyph Insert At Top End (U+13434)
- Egyptian Hieroglyph Insert At Bottom End (U+13435)
- Egyptian Hieroglyph Overlay Middle (U+13436)
- Egyptian Hieroglyph Begin Segment (U+13437)
- Egyptian Hieroglyph End Segment (U+13438)
- Brahmi Number Joiner (U+1107F)
- Brahmi-derived script dead-character formation (Virama and similar diacritics)
- Devanagari Sign Virama (U+094D)
- Bengali Sign Virama (U+09CD)
- Gurmukhi Sign Virama (U+0A4D)
- Gujarati Sign Virama (U+0ACD)
- Oriya Sign Virama (U+0B4D)
- Tamil Sign Virama (U+0BCD)
- Telugu Sign Virama (U+0C4D)
- Kannada Sign Virama (U+0CCD)
- Malayalam Sign Vertical Bar Virama (U+0D3B)
- Malayalam Sign Circular Virama (U+0D3C)
- Malayalam Sign Virama (U+0D4D)
- Sinhala Sign Al-Lakuna (U+0DCA)
- Thai Character Phinthu (U+0E3A)
- Thai Character Yamakkan (U+0E4E)
- Lao Sign Pali Virama (U+0EBA)
- Myanmar Sign Virama (U+1039)
- Tagalog Sign Virama (U+1714)
- Hanunoo Sign Pamudpod (U+1734)
- Khmer Sign Viriam (U+17D1)
- Khmer Sign Coeng (U+17D2)
- Tai Tham Sign Sakot (U+1A60)
- Tai Tham Sign Ra Haam (U+1A7A)
- Balinese Adeg Adeg (U+1B44)
- Sundanese Sign Pamaaeh (U+1BAA)
- Sundanese Sign Virama (U+1BAB)
- Batak Pangolat (U+1BF2)
- Batak Panongonan (U+1BF3)
- Syloti Nagri Sign Hasanta (U+A806)
- Saurashtra Sign Virama (U+A8C4)
- Rejang Virama (U+A953)
- Javanese Pangkon (U+A9C0)
- Meetei Mayek Virama (U+AAF6)
- Kharoshthi Virama (U+10A3F)
- Brahmi Virama (U+11046)
- Kaithi Sign Virama (U+110B9)
- Chakma Virama (U+11133)
- Sharada Sign Virama (U+111C0)
- Khojki Sign Virama (U+11235)
- Khudawadi Sign Virama (U+112EA)
- Grantha Sign Virama (U+1134D)
- Newa Sign Virama (U+11442)
- Tirhuta Sign Virama (U+114C2)
- Siddham Sign Virama (U+115BF)
- Modi Sign Virama (U+1163F)
- Takri Sign Virama (U+116B6)
- Ahom Sign Killer (U+1172B)
- Dogra Sign Virama (U+11839)
- Nandinagari Sign Virama (U+119E0)
- Zanabazar Square Sign Virama (U+11A34)
- Zanabazar Square Subjoiner (U+11A47)
- Soyombo Subjoiner (U+11A99)
- Bhaiksuki Sign Virama (U+11C3F)
- Masaram Gondi Sign Halanta (U+11D44)
- Masaram Gondi Virama (U+11D45)
- Gunjala Gondi Virama (U+11D97)
- Historical Viramas with other functions
- Tibetan Mark Halanta (U+0F84)
- Myanmar Sign Asat (U+103A)
- Limbu Sign Sa-I (U+193B)
- Meetei Mayek Apun Iyek (U+ABED)
- Chakma Maayyaa (U+11134)
- Mongolian Variation Selectors
- Mongolian Free Variation Selector One (U+180B)
- Mongolian Free Variation Selector Two (U+180C)
- Mongolian Free Variation Selector Three (U+180D)
- Mongolian Vowel Separator (U+180E)
- Generic Variation Selectors
- Variation Selector-1 through -16 (U+FE00–U+FE0F)
- Variation Selector-17 through -256 (U+E0100–U+E01EF)
- Tag characters (U+E0001 and U+E0020–U+E007F)
- Tifinagh Consonant Joiner (U+2D7F)
- Ogham Space Mark (U+1680)
- Ideographic variation indicator (U+303E)
- Ideographic Description (U+2FF0–U+2FFB)
- Musical Format Control
- Musical Symbol Begin Beam (U+1D173)
- Musical Symbol End Beam (U+1D174)
- Musical Symbol Begin Tie (U+1D175)
- Musical Symbol End Tie (U+1D176)
- Musical Symbol Begin Slur (U+1D177)
- Musical Symbol End Slur (U+1D178)
- Musical Symbol Begin Phrase (U+1D179)
- Musical Symbol End Phrase (U+1D17A)
- Shorthand Format Control
- Shorthand Format Letter Overlap (U+1BCA0)
- Shorthand Format Continuing Overlap (U+1BCA1)
- Shorthand Format Down Step (U+1BCA2)
- Shorthand Format Up Step (U+1BCA3)
- Deprecated Alternate Formatting
- Inhibit Symmetric Swapping (U+206A)
- Activate Symmetric Swapping (U+206B)
- Inhibit Arabic Form Shaping (U+206C)
- Activate Arabic Form Shaping (U+206D)
- National Digit Shapes (U+206E)
- Nominal Digit Shapes (U+206F)
- Object Replacement Character (U+FFFC)
- Replacement Character (U+FFFD)
Whitespace, joiners, and separators
Unicode provides a list of characters it deems whitespace characters for interoperability support. Software Implementations and other standards may use the term to denote a slightly different set of characters. For example, Java does not consider U+00A0 NO-BREAK SPACE or U+0085 <control-0085> (NEXT LINE) to be whitespace, even though Unicode does. Whitespace characters are characters typically designated for programming environments. Often they have no syntactic meaning in such programming environments and are ignored by the machine interpreters. Unicode designates the legacy control characters U+0009 through U+000D and U+0085 as whitespace characters, as well as all characters whose General Category property value is Separator. There are 25 total whitespace characters as of Unicode 12.1.
Grapheme joiners and non-joiners
The zero-width joiner (U+200D) and zero-width non-joiner (U+200C) control the joining and ligation of glyphs. The joiner does not cause characters that would not otherwise join or ligate to do so, but when paired with the non-joiner these characters can be used to control the joining and ligating properties of the surrounding two joining or ligating characters. The Combining Grapheme Joiner (U+034F) is used to distinguish two base characters as one common base or digraph, mostly for underlying text processing, collation of strings, case folding and so on.
Word joiners and separators
The most common word separator is a space (U+0020). However, there are other word joiners and separators that also indicate a break between words and participate in line-breaking algorithms. The No-Break Space (U+00A0) also produces a baseline advance without a glyph but inhibits rather than enabling a line-break. The Zero Width Space (U+200B) allows a line-break but provides no space: in a sense joining, rather than separating, two words. Finally, the Word Joiner (U+2060) inhibits line breaks and also involves none of the white space produced by a baseline advance.
|Baseline Advance||No Baseline Advance|
|Allow Line-break |
|Space U+0020||Zero Width Space U+200B|
|No-Break Space U+00A0||Word Joiner U+2060|
- Line Separator (U+2028)
- Paragraph Separator (U+2029)
These provide Unicode with native paragraph and line separators independent of the legacy encoded ASCII control characters such as carriage return (U+000A), linefeed (U+000D), and Next Line (U+0085). Unicode does not provide for other ASCII formatting control characters which presumably then are not part of the Unicode plain text processing model. These legacy formatting control characters include Tab (U+0009), Line Tabulation or Vertical Tab (U+000B), and Form Feed (U+000C) which is also thought of as a page break.
The space character (U+0020) typically input by the space bar on a keyboard serves semantically as a word separator in many languages. For legacy reasons, the UCS also includes spaces of varying sizes that are compatibility equivalents for the space character. While these spaces of varying width are important in typography, the Unicode processing model calls for such visual effects to be handled by rich text, markup and other such protocols. They are included in the Unicode repertoire primarily to handle lossless roundtrip transcoding from other character set encodings. These spaces include:
- En Quad (U+2000)
- Em Quad (U+2001)
- En Space (U+2002)
- Em Space (U+2003)
- Three-Per-Em Space (U+2004)
- Four-Per-Em Space (U+2005)
- Six-Per-Em Space (U+2006)
- Figure Space (U+2007)
- Punctuation Space (U+2008)
- Thin Space (U+2009)
- Hair Space (U+200A)
- Medium Mathematical Space (U+205F)
Aside from the original ASCII space, the other spaces are all compatibility characters. In this context this means that they effectively add no semantic content to the text, but instead provide styling control. Within Unicode, this non-semantic styling control is often referred to as rich text and is outside the thrust of Unicode's goals. Rather than using different spaces in different contexts, this styling should instead be handled through intelligent text layout software.
Three other writing-system-specific word separators are:
- Mongolian Vowel Separator (U+180E)
- Ideographic Space (U+3000): behaves as an ideographic separator and generally rendered as white space of the same width as an ideograph.
- Ogham Space Mark (U+1680): this character is sometimes displayed with a glyph and other times as only white space.
Line-break control characters
Several characters are designed to help control line-breaks either by discouraging them (no-break characters) or suggesting line breaks such as the soft hyphen (U+00AD) (sometimes called the "shy hyphen"). Such characters, though designed for styling, are probably indispensable for the intricate types of line-breaking they make possible.
- Non-breaking hyphen (U+2011)
- No-break space (U+00A0)
- Tibetan Mark Delimiter Tsheg Bstar (U+0F0C)
- Narrow no-break space (U+202F)
The break inhibiting characters are meant to be equivalent to a character sequence wrapped in the Word Joiner U+2060. However, the Word Joiner may be appended before or after any character that would allow a line-break to inhibit such line-breaking.
- Soft hyphen (U+00AD)
- Tibetan Mark Intersyllabic Tsheg (U+0F0B)
- Zero-width space (U+200B)
Both the break inhibiting and break enabling characters participate with other punctuation and whitespace characters to enable text imaging systems to determine line breaks within the Unicode Line Breaking Algorithm.
Special code points
Among the millions of code points available in UCS, many are set aside for other uses or for designation by third parties. These set aside code points include non-character code points, surrogates, and private use code points. They may have no or few character properties associated with them.
66 non-character code points (labeled
<not a character>) are set aside and guaranteed to never be used for a character. Each of the 17 planes has its two ending code points set aside as non-characters. So, noncharacters are: U+FFFE and U+FFFF on the BMP, U+1FFFE and U+1FFFF on Plane 1, and so on, up to U+10FFFE and U+10FFFF on Plane 16, for a total of 34 code points. In addition, there is a contiguous range of another 32 noncharacter code points in the BMP: U+FDD0..U+FDEF. Software implementations are therefore free to use these code points for internal use. One particularly useful example of a noncharacter is the code point U+FFFE. This code point has the reverse UTF-16/UCS-2 byte sequence of the byte order mark (U+FEFF). If a stream of text contains this noncharacter, this is a good indication the text has been interpreted with the incorrect endianness.
Versions of the Unicode standard from 3.1.0 to 6.3.0 claimed that noncharacters "should never be interchanged". Corrigendum #9 of the standard later stated that this was leading to "inappropriate over-rejection", clarifying that "[Noncharacters] are not illegal in interchange nor do they cause ill-formed Unicode text", and removing the original claim.
The UCS uses surrogates to address characters outside the initial Basic Multilingual Plane without resorting to more than 16 bit byte representations. There are 1024 "high" surrogates (D800–DBFF) and 1024 "low" surrogates (DC00–DFFF). By combining a pair of surrogates, the remaining characters in all the other planes can be addressed (1024 × 1024 = 1048576 code points in the other 16 planes). In UTF-16, they must always appear in pairs, as a high surrogate followed by a low surrogate, thus using 32 bits to denote one code point.
A surrogate pair denotes the code point
- 10000₁₆ + (H - D800₁₆) × 400₁₆ + (L - DC00₁₆)
where H and L are the numeric values of the high and low surrogates respectively.
Since high surrogate values in the range DB80–DBFF always produce values in the Private Use planes, the high surrogate range can be further divided into (normal) high surrogates (D800–DB7F) and "high private use surrogates" (DB80–DBFF).
Isolated surrogate code points have no general interpretation; consequently, no character code charts or names lists are provided for this range. In the Python programming language, individual surrogate codes are used to embed undecodable bytes in Unicode strings.
The UCS includes 137468 code points for private use in three different ranges, each called a Private Use Area (PUA). The Unicode standard recognizes code points within PUAs as legitimate Unicode character codes, but does not assign them any (abstract) character. Instead, individuals, organizations, software vendors, operating system vendors, font vendors and communities of end-users are free to use them as they see fit. Within closed systems, characters in the PUA can operate unambiguously, allowing such systems to represent characters or glyphs not defined in Unicode. In public systems their use is more problematic, since there is no registry and no way to prevent several organizations from adopting the same code points for different purposes. One example of such a conflict is Apple’s use of U+F8FF for the Apple logo, versus the ConScript Unicode Registry’s use of U+F8FF as klingon mummification glyph in the Klingon script.
The Basic Multilingual Plane includes a PUA in the range from U+E000 to U+F8FF (6400 code locations). Plane Fifteen and Plane Sixteen have a PUAs that consist of all but their final two code locations, which are designated non-characters. The PUA in Plane Fifteen is the range from U+F0000 to U+FFFFD (65534 code locations). The PUA in Plane Sixteen is the range from U+100000 to U+10FFFD (65534 code locations).
PUAs are a concept inherited from certain Asian encoding systems. These systems had private use areas to encode what the Japanese call gaiji (rare characters not normally found in fonts) in application-specific ways.
Characters grapheme clusters and glyphs
Whereas many other character sets assign a character for every possible glyph representation of the character, Unicode seeks to treat characters separately from glyphs. This distinction is not always unambiguous, however a few examples will help illustrate the distinction. Often two characters may be combined together typographically to improve the readability of the text. For example, the three letter sequence "ffi" may be treated as a single glyph. Other characters sets would often assign a code point to this glyph in addition to the individual letters: "f" and "i".
In addition, Unicode approaches diacritic modified letters as separate characters that, when rendered, become a single glyph. For example, an "o" with diaeresis: "ö". Traditionally, other character sets assigned a unique character code point for each diacritic modified letter used in each language. Unicode seeks to create a more flexible approach by allowing combining diacritic characters to combine with any letter. This has the potential to significantly reduce the number of active code points needed for the character set. As an example, consider a language that uses the Latin script and combines the diaeresis with the upper- and lower-case letters "a", "o", and "u". With the Unicode approach, only the diaeresis diacritic character needs to be added to the character set to use with the Latin letters: "a", "A", "o", "O", "u", and "U": seven characters in all. A legacy character sets needs to add six precomposed letters with a diaeresis in addition to the six code points it uses for the letters without diaeresis: twelve character code points in total.
UCS includes thousands of characters that Unicode designates as compatibility characters. These are characters that were included in UCS in order to provide distinct code points for characters that other character sets differentiate, but would not be differentiated in the Unicode approach to characters.
The chief reason for this differentiation was that Unicode makes a distinction between characters and glyphs. For example, when writing English in a cursive style, the letter "i" may take different forms whether it appears at the beginning of a word, the end of a word, the middle of a word or in isolation. Languages such as Arabic written in an Arabic script are always cursive. Each letter has many different forms. UCS includes 730 Arabic form characters that decompose to just 88 unique Arabic characters. However, these additional Arabic characters are included so that text processing software may translate text from other characters sets to UCS and back again without any loss of information crucial for non-Unicode software.
However, for UCS and Unicode in particular, the preferred approach is to always encode or map that letter to the same character no matter where it appears in a word. Then the distinct forms of each letter are determined by the font and text layout software methods. In this way, the internal memory for the characters remains identical regardless of where the character appears in a word. This greatly simplifies searching, sorting and other text processing operations.
Every character in Unicode is defined by a large and growing set of properties. Most of these properties are not part of Universal Character Set. The properties facilitate text processing including collation or sorting of text, identifying words, sentences and graphemes, rendering or imaging text and so on. Below is a list of some of the core properties. There are many others documented in the Unicode Character Database.
|Name||LATIN CAPITAL LETTER A||This is a permanent name assigned by the joint cooperation of Unicode and the ISO UCS. A few known poorly chosen names exist and are acknowledged but will not be changed, in order to ensure specification stability.|
|Code Point||U+0041||The Unicode code point is a number also permanently assigned along with the "Name" property and included in the companion UCS. The usual custom is to represent the code point as hexadecimal number with the prefix "U+" in front.|
|Representative Glyph||The representative glyphs are provided in code charts.|
|General Category||Uppercase_Letter||The general category is expressed as a two-letter sequence such as "Lu" for uppercase letter or "Nd", for decimal digit number.|
|Combining Class||Not_Reordered (0)||Since diacritics and other combining marks can be expressed with multiple characters in Unicode the "Combining Class" property allows characters to be differentiated by the type of combining character it represents. The combining class can be expressed as an integer between 0 and 255 or as a named value. The integer values allow the combining marks to be reordered into a canonical order to make string comparison of identical strings possible.|
|Bidirectional Category||Left_To_Right||Indicates the type of character for applying the Unicode bidirectional algorithm.|
|Bidirectional Mirrored||no||Indicates the character's glyph must be reversed or mirrored within the bidirectional algorithm. Mirrored glyphs can be provided by font makers, extracted from other characters related through the “Bidirectional Mirroring Glyph” property or synthesized by the text rendering system.|
|Bidirectional Mirroring Glyph||N/A||This property indicates the code point of another character whose glyph can serve as the mirrored glyph for the present character when mirroring within the bidirectional algorithm.|
|Decimal Digit Value||NaN||For numerals, this property indicates the numeric value of the character. Decimal digits have all three values set to the same value, presentational rich text compatibility characters and other Arabic-Indic non-decimal digits typically have only the latter two properties set to the numeric value of the character while numerals unrelated to Arabic Indic digits such as Roman Numerals or Hanzhou/Suzhou numerals typically have only the "Numeric Value" indicated.|
|Ideographic||False||Indicates the character is a CJK ideograph: a logograph in the Han script.|
|Default Ignorable||False||Indicates the character is ignorable for implementations and that no glyph, last resort glyph, or replacement character need be displayed.|
|Deprecated||False||Unicode never removes characters from the repertoire, but on occasion Unicode has deprecated a small number of characters.|
- "The Unicode Standard". The Unicode Consortium. Retrieved 2016-08-09.
- "Roadmaps to Unicode". The Unicode Consortium. Retrieved 2016-08-09.
- "Section 2.13: Special Characters" (PDF). The Unicode Standard. The Unicode Consortium. March 2019.
- "Section 4.12: Characters with Unusual Properties" (PDF). The Unicode Standard. The Unicode Consortium. March 2019.
- "Section 6.2: General Punctuation" (PDF). The Unicode Standard. The Unicode Consortium. March 2019.
- "UAX #14: Unicode Line Breaking Algorithm". The Unicode Consortium. 2016-06-01. Retrieved 2016-08-09.
- v. Löwis, Martin (2009-04-22). "Non-decodable Bytes in System Character Interfaces". Python Enhancement Proposals. PEP 383. Retrieved 2016-08-09.
- Michael Everson (2004-01-15). "Klingon: U+F8D0 - U+F8FF".
- "Unicode Character Database". The Unicode Consortium. Retrieved 2016-08-09.
- Freytag, Asmus; McGowan, Rick; Whistler, Ken. "Unicode Technical Note #27 — Known Anomalies in Unicode Character Names". Unicode Consortium.
- Not the official Unicode representative glyph, but merely a representative glyph. To see the official Unicode representative glyph, see the code charts.
- "Character Code Charts". The Unicode Consortium. Retrieved 2016-08-09.
- "UAX #44: Unicode Character Database". General Category Values. The Unicode Consortium. 2014-06-05. Retrieved 2016-08-09.
- Davis, Mark; Iancu, Laurențiu; Whistler, Ken. "Table 9. Property Table § PropList.txt". Unicode Standard Annex #44 — Unicode Character Database. Unicode Consortium.
- "Unicode Utilities: Character Property Index". The Unicode Consortium. Retrieved 2015-06-09.
|Wikimedia Commons has media related to Unicode.|