Trioxidane (also systematically named μ-trioxidanediidodihydrogen), also called hydrogen trioxide or dihydrogen trioxide, is an inorganic compound with the chemical formula H[O]
3H (also written as [H(μ-O
3)H] or [H
3]). It is one of the unstable hydrogen polyoxides (and therefore hydrogen chalcogenides). In aqueous solutions, trioxidane decomposes to form water and singlet oxygen:
|Preferred IUPAC name|
3D model (JSmol)
|Molar mass||50.013 g·mol−1|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
The reverse reaction, the addition of singlet oxygen to water, typically does not occur in part due to the scarcity of singlet oxygen. In biological systems, however, ozone is known to be generated from singlet oxygen, and the presumed mechanism is an antibody-catalyzed production of trioxidane from singlet oxygen.
Trioxidane can be obtained in small, but detectable, amounts in reactions of ozone and hydrogen peroxide, or by the electrolysis of water. Larger quantities have been prepared by the reaction of ozone with organic reducing agents at low temperatures in a variety of organic solvents such as the anthraquinone process, and it is also formed during the decomposition of organic hydrotrioxides (ROOOH). Alternatively, trioxidane can be prepared by reduction of ozone with 1,2-diphenylhydrazine at low temperature. Using a resin-bound version of the latter, relatively pure trioxidane can be isolated as a solution in organic solvent. Preparation of high purity solutions is possible using the methytrioxorhenium(VII) catalyst. In acetone-d6 at –20 °C, the characteristic 1H NMR signal of trioxidane could be observed at a chemical shift of 13.1 ppm. Solutions of hydrogen trioxide in diethyl ether can be safely stored at -20 °C for as long as a week.
The reaction of ozone with hydrogen peroxide is known as the "peroxone process". This mixture has been used for some time for treating groundwater contaminated with organic compounds. The reaction produces H2O3 and H2O5.
In 2005, trioxidane was observed experimentally by microwave spectroscopy in a supersonic jet. The molecule exists in a skewed structure, with an oxygen–oxygen–oxygen–hydrogen dihedral angle of 81.8°. The oxygen–oxygen bond lengths of 142.8 picometer are slightly shorter than the 146.4 pm oxygen–oxygen bonds in hydrogen peroxide. Various dimeric and trimeric forms also seem to exist. It is slightly more acidic than hydrogen peroxide, dissociating into H+ and OOOH−.
Trioxidane readily decomposes into water and singlet oxygen, with a half-life of about 16 minutes in organic solvents at room temperature, but only milliseconds in water. It reacts with organic sulfides to form sulfoxides, but little else is known of its reactivity.
Recent research found that trioxidane is the active ingredient responsible for the antimicrobial properties of the well known ozone/hydrogen peroxide mix. Because these two compounds are present in biological systems as well it is argued that an antibody in the human body can generate trioxidane as a powerful oxidant against invading bacteria. The source of the compound in biological systems is the reaction between singlet oxygen and water (which proceeds in either direction, of course, according to concentrations), with the singlet oxygen being produced by immune cells.
Computational chemistry predicts that more oxygen chain molecules or hydrogen polyoxides exist and that even indefinitely long oxygen chains can exist in a low-temperature gas. With this spectroscopic evidence a search for these type of molecules can start in interstellar space.
- Nomenclature of Organic Chemistry : IUPAC Recommendations and Preferred Names 2013 (Blue Book). Cambridge: The Royal Society of Chemistry. 2014. p. 1024. doi:10.1039/9781849733069-FP001. ISBN 978-0-85404-182-4.
- Paul T. Nyffeler; Boyle; Eltepu; Wong; Eschenmoser; Lerner; Wentworth Jr (2004). "Dihydrogen Trioxide (HOOOH) Is Generated during the Thermal Reaction between Hydrogen Peroxide and Ozone". Angewandte Chemie International Edition. 43 (35): 4656–4659. doi:10.1002/anie.200460457. PMID 15317003.
- Plesničar, Božo (2005). "Progress in the Chemistry of Dihydrogen Trioxide (HOOOH)" (PDF). Acta Chimica Slovenica. 52: 1–12.
- Strle, G.; Cerkovnik, J. (2015), "A Simple and Efficient Preparation of High‐Purity Hydrogen Trioxide (HOOOH)", Angew. Chem. Int. Ed., 54 (34): 9917–9920, doi:10.1002/anie.201504084
- Xu, X.; Goddard, W. A. (2002). "Nonlinear partial differential equations and applications: Peroxone chemistry: Formation of H2O3 and ring-(HO2)(HO3) from O3/H2O2". Proceedings of the National Academy of Sciences. 99 (24): 15308. Bibcode:2002PNAS...9915308X. doi:10.1073/pnas.202596799. PMC 137712.
- Kohsuke Suma; Yoshihiro Sumiyoshi & Yasuki Endo (2005). "The Rotational Spectrum and Structure of HOOOH". J. Am. Chem. Soc. 127 (43): 14998–14999. doi:10.1021/ja0556530. PMID 16248618.
- A Time-Honored Chemical Reaction Generates an Unexpected Product, News & Views, September 13, 2004
- Roald Hoffmann (2004). "The Story of O" (PDF). American Scientist. 92: 23. doi:10.1511/2004.1.23.