Stearic acid (// STEER-ik, // stee-ARR-ik) is a saturated fatty acid with an 18-carbon chain and has the IUPAC name octadecanoic acid. It is a waxy solid and its chemical formula is C17H35CO2H. Its name comes from the Greek word στέαρ "stéar", which means tallow. The salts and esters of stearic acid are called stearates. As its ester, stearic acid is one of the most common saturated fatty acids found in nature following palmitic acid. The triglyceride derived from three molecules of stearic acid is called stearin.
|Preferred IUPAC name
C18:0 (Lipid numbers)
3D model (JSmol)
CompTox Dashboard (EPA)
|Molar mass||284.484 g·mol−1|
|Density||0.9408 g/cm3 (20 °C)|
0.847 g/cm3 (70 °C)
|Melting point||69.3 °C (156.7 °F; 342.4 K)|
|Boiling point|| 361 °C (682 °F; 634 K) |
232 °C (450 °F; 505 K)
at 15 mmHg
|0.00018 g/100 g (0 °C)|
0.00029 g/100 g (20 °C)
0.00034 g/100 g (30 °C)
0.00042 g/100 g (45 °C)
0.00050 g/100 g (60 °C)
|Solubility||Soluble in alkyl acetates, alcohols, HCOOCH3, phenyls, CS2, CCl4|
|Solubility in dichloromethane||3.58 g/100 g (25 °C)|
8.85 g/100 g (30 °C)
18.3 g/100 g (35 °C)
|Solubility in ethanol||1.09 g/100 mL (10 °C)|
2.25 g/100 g (20 °C)
5.42 g/100 g (30 °C)
22.7 g/100 g (40 °C)
105 g/100g (50 °C)
400 g/100g (60 °C)
|Solubility in acetone||4.96 g/100 g|
|Solubility in chloroform||18.4 g/100 g|
|Solubility in toluene||15.75 g/100 g|
|Vapor pressure||0.01 kPa (158 °C)|
0.46 kPa (200 °C)
16.9 kPa (300 °C)
|Thermal conductivity||0.173 W/m·K (70 °C)|
0.166 W/m·K (100 °C)
Refractive index (nD)
|1.4299 (80 °C)|
|B-form = Monoclinic|
|B-form = P21/a|
|B-form = Cs|
α = 90°, β = 117.37°, γ = 90°
Heat capacity (C)
Std enthalpy of
Std enthalpy of
|NFPA 704 (fire diamond)|
|Flash point||113 °C (235 °F; 386 K)|
|Lethal dose or concentration (LD, LC):|
LD50 (median dose)
|21.5 mg/kg (rats, intravenous)|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Stearic acid is obtained from fats and oils by the saponification of the triglycerides using hot water (about 100 °C). The resulting mixture is then distilled. Commercial stearic acid is often a mixture of stearic and palmitic acids, although purified stearic acid is available.
Fats and oils rich in stearic acid are more abundant in animal fat (up to 30%) than in vegetable fat (typically <5%). The important exceptions are the foods cocoa butter and shea butter, where the stearic acid content (as a triglyceride) is 28–45%.
In general, the applications of stearic acid exploit its bifunctional character, with a polar head group that can be attached to metal cations and a nonpolar chain that confers solubility in organic solvents. The combination leads to uses as a surfactant and softening agent. Stearic acid undergoes the typical reactions of saturated carboxylic acids, a notable one being reduction to stearyl alcohol, and esterification with a range of alcohols. This is used in a large range of manufactures, from simple to complex electronic devices.
As food additive
The fatty acids (E number E570) are absorbed in the regular diet the same as the free fatty acids. Low acute toxicity is shown. There was in 2017 no evidence at doses up to 10% in the diet for toxic effects.
Soaps, cosmetics, detergents
Stearic acid is mainly used in the production of detergents, soaps, and cosmetics such as shampoos and shaving cream products. Soaps are not made directly from stearic acid, but indirectly by saponification of triglycerides consisting of stearic acid esters. Esters of stearic acid with ethylene glycol, glycol stearate, and glycol distearate are used to produce a pearly effect in shampoos, soaps, and other cosmetic products. They are added to the product in molten form and allowed to crystallize under controlled conditions. Detergents are obtained from amides and quaternary alkylammonium derivatives of stearic acid.
Lubricants, softening and release agents
In view of the soft texture of the sodium salt, which is the main component of soap, other salts are also useful for their lubricating properties. Lithium stearate is an important component of grease. The stearate salts of zinc, calcium, cadmium, and lead are used to soften PVC. Stearic acid is used along with castor oil for preparing softeners in textile sizing. They are heated and mixed with caustic potash or caustic soda. Related salts are also commonly used as release agents, e.g. in the production of automobile tires.
Being inexpensive and chemically benign, stearic acid finds many niche applications. As an example, it can be used to make castings from a plaster piece mold or waste mold, and to make a mold from a shellacked clay original. In this use, powdered stearic acid is mixed in water and the suspension is brushed onto the surface to be parted after casting. This reacts with the calcium in the plaster to form a thin layer of calcium stearate, which functions as a release agent. When reacted with zinc it forms zinc stearate, which is used as a lubricant for playing cards (fanning powder) to ensure a smooth motion when fanning. Stearic acid is a common lubricant during injection molding and pressing of ceramic powders. It is also used as a mold release for foam latex that is baked in stone molds.
Stearic acid is used as a negative plate additive in the manufacture of lead-acid batteries. It is added at the rate of 0.6 g per kg of the oxide while preparing the paste. It is believed to enhance the hydrophobicity of the negative plate, particularly during dry-charging process. It also reduces the extension of oxidation of the freshly formed lead (negative active material) when the plates are kept for drying in the open atmosphere after the process of tank formation. As a consequence, the charging time of a dry uncharged battery during initial filling and charging (IFC) is comparatively lower, as compared to a battery assembled with plates which do not contain stearic acid additive.
Fatty acids are classic components of candle-making. Stearic acid is used along with simple sugar or corn syrup as a hardener in candies. In fireworks, stearic acid is often used to coat metal powders such as aluminium and iron. This prevents oxidation, allowing compositions to be stored for a longer period of time.
An isotope labeling study in humans concluded that the fraction of dietary stearic acid that oxidatively desaturates to oleic acid is 2.4 times higher than the fraction of palmitic acid analogously converted to palmitoleic acid. Also, stearic acid is less likely to be incorporated into cholesterol esters. In epidemiologic and clinical studies, stearic acid was found to be associated with lowered LDL cholesterol in comparison with other saturated fatty acids.
- Susan Budavari, ed. (1989). Merck Index (11th ed.). Rahway, New Jersey: Merck & Co., Inc. p. 8761. ISBN 978-0-911910-28-5.
- Lide, David R., ed. (2009). CRC Handbook of Chemistry and Physics (90th ed.). Boca Raton, Florida: CRC Press. ISBN 978-1-4200-9084-0.
- Ralston, A.W.; Hoerr, C.W. (1942). "The Solubilities of the Normal Saturated Fatty Acids". The Journal of Organic Chemistry. 7 (6): 546–555. doi:10.1021/jo01200a013.
- "stearic acid". Chemister.ru. 2007-03-19. Retrieved 2017-06-30.
- Seidell, Atherton; Linke, William F. (1919). Solubilities of Inorganic and Organic Compounds (2nd ed.). D. Van Nostrand Company. p. 677.
- Octadecanoic acid in Linstrom, Peter J.; Mallard, William G. (eds.); NIST Chemistry WebBook, NIST Standard Reference Database Number 69, National Institute of Standards and Technology, Gaithersburg (MD), http://webbook.nist.gov (retrieved 2014-06-15)
- Vargaftik, Natan B.; et al. (1993). Handbook of Thermal Conductivity of Liquids and Gases (illustrated ed.). CRC Press. p. 318. ISBN 978-0-8493-9345-7.
- von Sydow, E. (1955). "On the structure of the crystal form B of stearic acid". Acta Crystallographica. 8 (9): 557–560. doi:10.1107/S0365110X55001746.
- Gunstone, F. D., John L. Harwood, and Albert J. Dijkstra "The Lipid Handbook with Cd-Rom. 3rd ed. Boca Raton: CRC Press, 2007. ISBN 0849396883 | ISBN 978-0849396885
- David J. Anneken, Sabine Both, Ralf Christoph, Georg Fieg, Udo Steinberner, Alfred Westfechtel "Fatty Acids" in Ullmann's Encyclopedia of Industrial Chemistry 2006, Wiley-VCH, Weinheim. doi:10.1002/14356007.a10_245.pub2
- Beare-Rogers, J.; Dieffenbacher, A.; Holm, J.V. (2001). "Lexicon of lipid nutrition (IUPAC Technical Report)". Pure and Applied Chemistry. 73 (4): 685–744. doi:10.1351/pac200173040685.
- Fernando Aguilar, Riccardo Crebelli, Alessandro Di Domenico, Birgit Dusemund, Maria Jose Frutos, Pierre Galtier, David Gott, Ursula Gundert-Remy, Claude Lambré, Jean-Charles Leblanc, Oliver Lindtner, Peter Moldeus, Alicja Mortensen, Pasquale Mosesso, Dominique Parent-Massin, Agneta Oskarsson, Ivan Stankovic, Ine Waalkens-Berendsen, Rudolf Antonius Woutersen, Matthew Wright and Maged Younes. (2017). "Re-evaluation of fatty acids (E 570) as a food additive". EFSA Journal. 15 (5): 4785. doi:10.2903/j.efsa.2017.4785.CS1 maint: multiple names: authors list (link)
- Tsenga, Wenjea J.; Mo Liua, Dean; Hsub, Chung-King (1999). "Influence of stearic acid on suspension structure and green microstructure of injection-molded zirconia ceramics". Ceramics International. 25 (2): 191–195. doi:10.1016/S0272-8842(98)00024-8.
- Emken, Edward A. (1994). "Metabolism of dietary stearic acid relative to other fatty acids in human subjects". American Journal of Clinical Nutrition. 60 (6): 1023S–1028S. doi:10.1093/ajcn/60.6.1023S. PMID 7977144.
- Hunter, J. E.; Zhang, J.; Kris-Etherton, P. M. (2009). "Cardiovascular disease risk of dietary stearic acid compared with trans, other saturated, and unsaturated fatty acids: A systematic review". American Journal of Clinical Nutrition. 91 (1): 46–63. doi:10.3945/ajcn.2009.27661. PMID 19939984.