In thermodynamics, a state function or function of state or point function is a function defined for a system relating several state variables or state quantities that depends only on the current equilibrium state of the system, for example a gas, a liquid, a solid, crystal, or emulsion. State functions do not depend on the path by which the system arrived at its present state. A state function describes the equilibrium state of a system and thus also describes the type of system. For example, a state function could describe an atom or molecule in a gaseous, liquid, or solid form; a heterogeneous or homogeneous mixture; and the amounts of energy required to create such systems or change them into a different equilibrium state.
The classical Carnot heat engine
For example, internal energy, enthalpy, and entropy are state quantities because they describe quantitatively an equilibrium state of a thermodynamic system, irrespective of how the system arrived in that state. In contrast, mechanical work and heat are process quantities or path functions, because their values depend on the specific transition (or path) between two equilibrium states. Heat in certain discrete amounts can describe a certain state function, such as enthalpy, but in general, does not truly describe the system unless it is defined as the state function of a certain system, and thus enthalpy is described by an amount of heat. This can also apply to entropy when heat is compared to temperature. The mode of description breaks down for quantities exhibiting hysteresis effects.
It is likely that the term “functions of state” was used in a loose sense during the 1850s and 60s by those such as Rudolf Clausius, William Rankine, Peter Tait, William Thomson, and it is clear that by the 1870s the term had acquired a use of its own. In 1873, for example, Willard Gibbs, in his paper “Graphical Methods in the Thermodynamics of Fluids”, states: “The quantities V, B, T, U, and S are determined when the state of the body is given, and it may be permitted to call them functions of the state of the body.
A thermodynamic system is described by a number of thermodynamic parameters (e.g. temperature, volume, pressure) which are not necessarily independent. The number of parameters needed to describe the system is the dimension of the state space of the system (D). For example, a monatomic gas having a fixed number of particles is a simple case of a two-dimensional system (D = 2). In this example, any system is uniquely specified by two parameters, such as pressure and volume, or perhaps pressure and temperature. These choices are equivalent. They are simply different coordinate systems in the two-dimensional thermodynamic state space. Given pressure and temperature, the volume is calculable from them. Likewise, given pressure and volume, the temperature is calculable from them. An analogous statement holds for higher-dimensional spaces, as described by the state postulate.
Quite generally, a state function is of the form
where P denotes pressure, T denotes temperature, V denotes volume, and the ellipsis denotes other possible state variables like particle number N and entropy S. If the state space is two-dimensional as in the above example, one may visualize the state space as a three-dimensional graph (a surface in three-dimensional space). The labels of the axes are not unique, since there are more state variables than three in this case, and any two independent variables suffice to define the state.
When a system changes state continuously, it traces out a "path" in the state space. The path can be specified by noting the values of the state parameters as the system traces out the path, perhaps as a function of time, or some other external variable. For example, we might have the pressure and the volume as functions of time from time to ; this will specify a path in our two-dimensional state space example. We can now form all sorts of functions of time which we may integrate over the path. For example, if we wish to calculate the work done by the system from time to time we calculate
It is clear that in order to calculate the work W in the above integral, we will have to know the functions and at each time , over the entire path. A state function is a function of the parameters of the system which only depends upon the parameters' values at the endpoints of the path. For example, suppose we wish to calculate the work plus the integral of over the path. We would have:
It can be seen that the integrand can be expressed as the exact differential of the function and that therefore, the integral can be expressed as the difference in the value of at the end points of the integration. The product is therefore a state function of the system.
By way of notation, we will specify the use of d to denote an exact differential. In other words, the integral of will be equal to . The symbol δ will be reserved for an inexact differential, which cannot be integrated without full knowledge of the path. For example, will be used to denote an infinitesimal increment of work.
It is best to think of state functions as quantities or properties of a thermodynamic system, while non-state functions represent a process during which the state functions change. For example, the state function is proportional to the internal energy of an ideal gas, but the work is the amount of energy transferred as the system performs work. Internal energy is identifiable; it is a particular form of energy. Work is the amount of energy that has changed its form or location.
List of state functions
The following are considered to be state functions in thermodynamics:
- Callen, Herbert B. (1985). Thermodynamics and an Introduction to Thermostatistics. Wiley & Sons. ISBN 978-0-471-86256-7.
- Gibbs, Josiah Willard (1873). "Graphical Methods in the Thermodynamics of Fluids". Transactions of the Connecticut Academy. II. ASIN B00088UXBK.
- Mandl, F. (1988). Statistical physics (second ed.). Wiley & Sons. ISBN 978-0-471-91533-1.
Media related to State functions at Wikimedia Commons