Sector mass spectrometer
A sector instrument is a general term for a class of mass spectrometer that uses a static electric or magnetic sector or some combination of the two (separately in space) as a mass analyzer. A popular combination of these sectors has been the BEB (magnetic-electric-magnetic). Most modern sector instruments are double-focusing instruments (first developed by A. Dempster, K. Bainbridge and J. Mattauch in 1936) in that they focus the ion beams both in direction and velocity.
The behavior of ions in a homogeneous, linear, static electric or magnetic field (separately) as is found in a sector instrument is simple. The physics are described by a single equation called the Lorentz force law. This equation is the fundamental equation of all mass spectrometric techniques and applies in non-linear, non-homogeneous cases too and is an important equation in the field of electrodynamics in general.
So the force on an ion in a linear homogenous electric field (an electric sector) is:
in the direction of the electric field, with positive ions and opposite that with negative ions.
The force is only dependent on the charge and electric field strength. The lighter ions will be deflected more and heavier ions less due to the difference in inertia and the ions will physically separate from each other in space into distinct beams of ions as they exit the electric sector.
And the force on an ion in a linear homogenous magnetic field (a magnetic sector) is:
The force in the magnetic sector is complicated by the velocity dependence but with the right conditions (uniform velocity for example) ions of different masses will separate physically in space into different beams as with the electric sector.
These are some of the classic geometries from mass spectrographs which are often used to distinguish different types of sector arrangements, although most current instruments do not fit precisely into any of these categories as the designs have evolved further.
The sector instrument geometry consists of a 127.30° electric sector without an initial drift length followed by a 60° magnetic sector with the same direction of curvature. Sometimes called a "Bainbridge mass spectrometer," this configuration is often used to determine isotopic masses. A beam of positive particles is produced from the isotope under study. The beam is subject to the combined action of perpendicular electric and magnetic fields. Since the forces due to these two fields are equal and opposite when the particles have a velocity given by
they do not experience a resultant force; they pass freely through a slit, and are then subject to another magnetic field, transversing a semi-circular path and striking a photographic plate. The mass of the isotope is determined through subsequent calculation.
The Mattauch-Herzog geometry consists of a 31.82° ( radians) electric sector, a drift length which is followed by a 90° magnetic sector of opposite curvature direction. The entry of the ions sorted primarily by charge into the magnetic field produces an energy focussing effect and much higher transmission than a standard energy filter. This geometry is often used in applications with a high energy spread in the ions produced where sensitivity is nonetheless required, such as spark source mass spectrometry (SSMS) and secondary ion mass spectrometry (SIMS). The advantage of this geometry over the Nier-Johnson geometry is that the ions of different masses are all focused onto the same flat plane. This allows the use of a photographic plate or other flat detector array.
The Hinterberger-Konig geometry consists of a 42.43° electric sector, a long intermediate drift length and a 130° magnetic sector of the same curvature direction.
The Takeshita geometry consists of a 54.43° electric sector, and short drift length, a second electric sector of the same curvature direction followed by another drift length before a 180° magnetic sector of opposite curvature direction.
The Matsuda geometry consists of an 85° electric sector, a quadrupole lens and a 72.5° magnetic sector of the same curvature direction. This geometry is used in the SHRIMP and Panorama (gas source, high resolution, multicollector to measure isotopologues in geochemistry).
- IUPAC definition of electric sector
- Arthur Jeffrey Dempster (American physicist) at the Encyclopædia Britannica
- Burgoyne, Thomas W.; Gary M. Hieftje (1996). "An introduction to ion optics for the mass spectrograph". Mass Spectrometry Reviews. 15 (4): 241–259. Bibcode:1996MSRv...15..241B. CiteSeerX 10.1.1.625.841. doi:10.1002/(SICI)1098-2787(1996)15:4<241::AID-MAS2>3.0.CO;2-I. Archived from the original (abstract) on 2012-12-10.
- Klemm, Alfred (1946). "The theory of a mass-spectrograph with double focus independent of mass". Zeitschrift für Naturforschung. 1: 137–41. Bibcode:1946ZNatA...1..137K. doi:10.1515/zna-1946-0306 (inactive 2019-12-06).
- Schilling GD; Andrade FJ; Barnes JH; Sperline RP; Denton MB; Barinaga CJ; Koppenaal DW; Hieftje GM (2006). "Characterization of a second-generation focal-plane camera coupled to an inductively coupled plasma Mattauch-Herzog geometry mass spectrograph". Anal. Chem. 78 (13): 4319–25. doi:10.1021/ac052026k. PMID 16808438.
- De Laeter; J. & Kurz; M. D. (2006). "Alfred Nier and the sector field mass spectrometer". Journal of Mass Spectrometry. 41 (7): 847–854. Bibcode:2006JMSp...41..847D. doi:10.1002/jms.1057. PMID 16810642.
- "Nier–Johnson geometry". Nier-Johnson geometry. IUPAC Compendium of Chemical Terminology. IUPAC. 1997. doi:10.1351/goldbook.N04141. ISBN 978-0-9678550-9-7.
- US 4553029
- Thomson, J. J.: Rays of Positive Electricity and their Application to Chemical Analyses; Longmans Green: London, 1913