Reflection seismology (or seismic reflection) is a method of exploration geophysics that uses the principles of seismology to estimate the properties of the Earth's subsurface from reflected seismic waves. The method requires a controlled seismic source of energy, such as dynamite or Tovex blast, a specialized air gun or a seismic vibrator, commonly known by the trademark name Vibroseis. Reflection seismology is similar to sonar and echolocation. This article is about surface seismic surveys; for vertical seismic profiles, see VSP.
Reflections and refractions of seismic waves at geologic interfaces within the Earth were first observed on recordings of earthquake-generated seismic waves. The basic model of the Earth's deep interior is based on observations of earthquake-generated seismic waves transmitted through the Earth's interior (e.g., Mohorovičić, 1910). The use of human-generated seismic waves to map in detail the geology of the upper few kilometers of the Earth's crust followed shortly thereafter and has developed mainly due to commercial enterprise, particularly the petroleum industry.
Seismic reflection exploration grew out of the seismic refraction exploration method, which was used to find oil associated with salt domes. Ludger Mintrop, a German mine surveyor, devised a mechanical seismograph in 1914 that he successfully used to detect salt domes in Germany. He applied for a German patent in 1919 that was issued in 1926. In 1921 he founded the company Seismos, which was hired to conduct seismic exploration in Texas and Mexico, resulting in the first commercial discovery of oil using the refraction seismic method in 1924. The 1924 discovery of the Orchard salt dome in Texas led to a boom in seismic refraction exploration along the Gulf Coast, but by 1930 the method had led to the discovery of most of the shallow Gulf Coast salt domes, and the refraction seismic method faded.
The Canadian inventor Reginald Fessenden was the first to conceive of using reflected seismic waves to infer geology. His work was initially on the propagation of acoustic waves in water, motivated by the sinking of the Titanic by an iceberg in 1912. He also worked on methods of detecting submarines during World War I. He applied for the first patent on a seismic exploration method in 1914, which was issued in 1917. Due to the war, he was unable to follow up on the idea. John Clarence Karcher discovered seismic reflections independently while working for the United States Bureau of Standards (now the National Institute of Standards and Technology) on methods of sound ranging to detect artillery. In discussion with colleagues, the idea developed that these reflections could aid in exploration for petroleum. With several others, many affiliated with the University of Oklahoma, Karcher helped to form the Geological Engineering Company, incorporated in Oklahoma in April 1920. The first field tests were conducted near Oklahoma City, Oklahoma in 1921.
Early reflection seismology was viewed with skepticism by many in the oil industry. An early advocate of the method commented:
- "As one who personally tried to introduce the method into general consulting practice, the senior writer can definitely recall many times when reflections were not even considered on a par with the divining rod, for at least that device had a background of tradition."
The Geological Engineering Company folded due to a drop in the price of oil. In 1925, oil prices had rebounded, and Karcher helped to form Geophysical Research Corporation (GRC) as part of the oil company Amerada. In 1930, Karcher left GRC and helped to found Geophysical Service Incorporated (GSI). GSI was one of the most successful seismic contracting companies for over 50 years and was the parent of an even more successful company, Texas Instruments. Early GSI employee Henry Salvatori left that company in 1933 to found another major seismic contractor, Western Geophysical. Many other companies using reflection seismology in hydrocarbon exploration, hydrology, engineering studies, and other applications have been formed since the method was first invented. Major service companies today include CGG, ION Geophysical, Petroleum Geo-Services, Polarcus, TGS and WesternGeco. Most major oil companies also have actively conducted research into seismic methods as well as collected and processed seismic data using their own personnel and technology. Reflection seismology has also found applications in non-commercial research by academic and government scientists around the world.
Outline of the method
Seismic waves are mechanical perturbations that travel in the Earth at a speed governed by the acoustic impedance of the medium in which they are travelling. The acoustic (or seismic) impedance, Z, is defined by the equation:
When a seismic wave travelling through the Earth encounters an interface between two materials with different acoustic impedances, some of the wave energy will reflect off the interface and some will refract through the interface. At its most basic, the seismic reflection technique consists of generating seismic waves and measuring the time taken for the waves to travel from the source, reflect off an interface and be detected by an array of receivers (or geophones) at the surface. Knowing the travel times from the source to various receivers, and the velocity of the seismic waves, a geophysicist then attempts to reconstruct the pathways of the waves in order to build up an image of the subsurface.
In common with other geophysical methods, reflection seismology may be seen as a type of inverse problem. That is, given a set of data collected by experimentation and the physical laws that apply to the experiment, the experimenter wishes to develop an abstract model of the physical system being studied. In the case of reflection seismology, the experimental data are recorded seismograms, and the desired result is a model of the structure and physical properties of the Earth's crust. In common with other types of inverse problems, the results obtained from reflection seismology are usually not unique (more than one model adequately fits the data) and may be sensitive to relatively small errors in data collection, processing, or analysis. For these reasons, great care must be taken when interpreting the results of a reflection seismic survey.
The reflection experiment
The general principle of seismic reflection is to send elastic waves (using an energy source such as dynamite explosion or Vibroseis) into the Earth, where each layer within the Earth reflects a portion of the wave's energy back and allows the rest to refract through. These reflected energy waves are recorded over a predetermined time period (called the record length) by receivers that detect the motion of the ground in which they are placed. On land, the typical receiver used is a small, portable instrument known as a geophone, which converts ground motion into an analogue electrical signal. In water, hydrophones are used, which convert pressure changes into electrical signals. Each receiver's response to a single shot is known as a “trace” and is recorded onto a data storage device, then the shot location is moved along and the process is repeated. Typically, the recorded signals are subjected to significant amounts of signal processing before they are ready to be interpreted and this is an area of significant active research within industry and academia. In general, the more complex the geology of the area under study, the more sophisticated are the techniques required to remove noise and increase resolution. Modern seismic reflection surveys contain large amount of data and so require large amounts of computer processing, often performed on supercomputers or computer clusters.
Reflection and transmission at normal incidence
When a seismic wave encounters a boundary between two materials with different acoustic impedances, some of the energy in the wave will be reflected at the boundary, while some of the energy will be transmitted through the boundary. The amplitude of the reflected wave is predicted by multiplying the amplitude of the incident wave by the seismic reflection coefficient , determined by the impedance contrast between the two materials.
For a wave that hits a boundary at normal incidence (head-on), the expression for the reflection coefficient is simply
where and are the impedance of the first and second medium, respectively.
Similarly, the amplitude of the incident wave is multiplied by the transmission coefficient to predict the amplitude of the wave transmitted through the boundary. The formula for the normal-incidence transmission coefficient is
As the sum of the squares of amplitudes of the reflected and transmitted wave has to be equal to the square of amplitude of the incident wave, it is easy to show that
By observing changes in the strength of reflectors, seismologists can infer changes in the seismic impedances. In turn, they use this information to infer changes in the properties of the rocks at the interface, such as density and elastic modulus.
Reflection and transmission at non-normal incidence
The situation becomes much more complicated in the case of non-normal incidence, due to mode conversion between P-waves and S-waves, and is described by the Zoeppritz equations. In 1919, Karl Zoeppritz derived 4 equations that determine the amplitudes of reflected and refracted waves at a planar interface for an incident P-wave as a function of the angle of incidence and six independent elastic parameters. These equations have 4 unknowns and can be solved but they do not give an intuitive understanding for how the reflection amplitudes vary with the rock properties involved.
The reflection and transmission coefficients, which govern the amplitude of each reflection, vary with angle of incidence and can be used to obtain information about (among many other things) the fluid content of the rock. Practical use of non-normal incidence phenomena, known as AVO (see amplitude versus offset) has been facilitated by theoretical work to derive workable approximations to the Zoeppritz equations and by advances in computer processing capacity. AVO studies attempt with some success to predict the fluid content (oil, gas, or water) of potential reservoirs, to lower the risk of drilling unproductive wells and to identify new petroleum reservoirs. The 3-term simplification of the Zoeppritz equations that is most commonly used was developed in 1985 and is known as the "Shuey equation". A further 2-term simplification is known as the "Shuey approximation", is valid for angles of incidence less than 30 degrees (usually the case in seismic surveys) and is given below:
where = reflection coefficient at zero-offset (normal incidence); = AVO gradient, describing reflection behaviour at intermediate offsets and = angle of incidence. This equation reduces to that of normal incidence at =0.
Interpretation of reflections
The time it takes for a reflection from a particular boundary to arrive at the geophone is called the travel time. If the seismic wave velocity in the rock is known, then the travel time may be used to estimate the depth to the reflector. For a simple vertically traveling wave, the travel time from the surface to the reflector and back is called the Two-Way Time (TWT) and is given by the formula
where is the depth of the reflector and is the wave velocity in the rock.
A series of apparently related reflections on several seismograms is often referred to as a reflection event. By correlating reflection events, a seismologist can create an estimated cross-section of the geologic structure that generated the reflections. Interpretation of large surveys is usually performed with programs using high-end three-dimensional computer graphics.
Sources of noise
In addition to reflections off interfaces within the subsurface, there are a number of other seismic responses detected by receivers and are either unwanted or unneeded:
The airwave travels directly from the source to the receiver and is an example of coherent noise. It is easily recognizable because it travels at a speed of 330 m/s, the speed of sound in air.
Ground roll / Rayleigh wave / Scholte wave / Surface wave
A Rayleigh wave typically propagates along a free surface of a solid, but the elastic constants and density of air are very low compared to those of rocks so the surface of the Earth is approximately a free surface. Low velocity, low frequency and high amplitude Rayleigh waves are frequently present on a seismic record and can obscure signal, degrading overall data quality. They are known within the industry as ‘Ground Roll’ and are an example of coherent noise that can be attenuated with a carefully designed seismic survey. The Scholte wave is similar to ground roll but occurs at the sea-floor (fluid/solid interface) and it can possibly obscure and mask deep reflections in marine seismic records. The velocity of these waves varies with wavelength, so they are said to be dispersive and the shape of the wavetrain varies with distance.
Refraction / Head wave / Conical wave
A head wave refracts at an interface, travelling along it, within the lower medium and produces oscillatory motion parallel to the interface. This motion causes a disturbance in the upper medium that is detected on the surface. The same phenomenon is utilised in seismic refraction.
An event on the seismic record that has incurred more than one reflection is called a multiple. Multiples can be either short-path (peg-leg) or long-path, depending upon whether they interfere with primary reflections or not.
Multiples from the bottom of a body of water (the interface of the base of water and the rock or sediment beneath it) and the air-water interface are common in marine seismic data, and are suppressed by seismic processing.
Cultural noise includes noise from weather effects, planes, helicopters, electrical pylons, and ships (in the case of marine surveys), all of which can be detected by the receivers.
- Near-surface applications – an application that aims to understand geology at depths of up to approximately 1 km, typically used for engineering and environmental surveys, as well as coal and mineral exploration. A more recently developed application for seismic reflection is for geothermal energy surveys, although the depth of investigation can be up to 2 km deep in this case.
- Hydrocarbon exploration – used by the hydrocarbon industry to provide a high resolution map of acoustic impedance contrasts at depths of up to 10 km within the subsurface. This can be combined with seismic attribute analysis and other exploration geophysics tools and used to help geologists build a geological model of the area of interest.
- Mineral exploration – The traditional approach to near-surface (<300 m) mineral exploration has been to employ geological mapping, geochemical analysis and the use of aerial and ground-based potential field methods, in particular for greenfield exploration, in the recent decades reflection seismic has become a valid method for exploration in hard-rock environments.
- Crustal studies – investigation into the structure and origin of the Earth's crust, through to the Moho discontinuity and beyond, at depths of up to 100 km.
Reflection seismology, more commonly referred to as "seismic reflection" or abbreviated to "seismic" within the hydrocarbon industry, is used by petroleum geologists and geophysicists to map and interpret potential petroleum reservoirs. The size and scale of seismic surveys has increased alongside the significant concurrent increases in computer power during the last 25 years. This has led the seismic industry from laboriously – and therefore rarely – acquiring small 3D surveys in the 1980s to now routinely acquiring large-scale high resolution 3D surveys. The goals and basic principles have remained the same, but the methods have slightly changed over the years.
The primary environments for seismic exploration are land, the transition zone and marine:
Land – The land environment covers almost every type of terrain that exists on Earth, each bringing its own logistical problems. Examples of this environment are jungle, desert, arctic tundra, forest, urban settings, mountain regions and savannah.
Transition Zone (TZ) – The transition zone is considered to be the area where the land meets the sea, presenting unique challenges because the water is too shallow for large seismic vessels but too deep for the use of traditional methods of acquisition on land. Examples of this environment are river deltas, swamps and marshes, coral reefs, beach tidal areas and the surf zone. Transition zone seismic crews will often work on land, in the transition zone and in the shallow water marine environment on a single project in order to obtain a complete map of the subsurface.
Marine – The marine zone is either in shallow water areas (water depths of less than 30 to 40 metres would normally be considered shallow water areas for 3D marine seismic operations) or in the deep water areas normally associated with the seas and oceans (such as the Gulf of Mexico).
Seismic surveys are typically designed by National oil companies and International oil companies who hire service companies such as CGG, Petroleum Geo-Services and WesternGeco to acquire them. Another company is then hired to process the data, although this can often be the same company that acquired the survey. Finally the finished seismic volume is delivered to the oil company so that it can be geologically interpreted.
Land survey acquisition
Land seismic surveys tend to be large entities, requiring hundreds of tons of equipment and employing anywhere from a few hundred to a few thousand people, deployed over vast areas for many months. There are a number of options available for a controlled seismic source in a land survey and particularly common choices are Vibroseis and dynamite. Vibroseis is a non-impulsive source that is cheap and efficient but requires flat ground to operate on, making its use more difficult in undeveloped areas. The method comprises one or more heavy, all-terrain vehicles lowering a steel plate onto the ground, which is then vibrated with a specific frequency distribution and amplitude. It produces a low energy density, allowing it to be used in cities and other built-up areas where dynamite would cause significant damage, though the large weight attached to a Vibroseis truck can cause its own environmental damage. Dynamite is an impulsive source that is regarded as the ideal geophysical source due to it producing an almost perfect impulse function but it has obvious environmental drawbacks. For a long time, it was the only seismic source available until weight dropping was introduced around 1954, allowing geophysicists to make a trade-off between image quality and environmental damage. Compared to Vibroseis, dynamite is also operationally inefficient because each source point needs to be drilled and the dynamite placed in the hole.
A land seismic survey requires substantial logistical support. In addition to the day-to-day seismic operation itself, there must also be support for the main camp (for catering, waste management and laundry etc.), smaller camps (for example where the distance is too far to drive back to the main camp with vibrator trucks), vehicle and equipment maintenance, medical personnel and security.
Unlike in marine seismic surveys, land geometries are not limited to narrow paths of acquisition, meaning that a wide range of offsets and azimuths is usually acquired and the largest challenge is increasing the rate of acquisition. The rate of production is obviously controlled by how fast the source (Vibroseis in this case) can be fired and then move on to the next source location. Attempts have been made to use multiple seismic sources at the same time in order to increase survey efficiency and a successful example of this technique is Independent Simultaneous Sweeping (ISS).
Marine survey acquisition (streamer)
Traditional marine seismic surveys are conducted using specially-equipped vessels that tow one or more cables containing a series of hydrophones at constant intervals (see diagram). The cables are known as streamers, with 2D surveys using only 1 streamer and 3D surveys employing up to 12 or more (though 6 or 8 is more common). The streamers are deployed just beneath the surface of the water and are at a set distance away from the vessel. The seismic source, usually an airgun or an array of airguns but other sources are available, is also deployed beneath the water surface and is located between the vessel and the first receiver. Two identical sources are often used to achieve a faster rate of shooting. Marine seismic surveys generate a significant quantity of data, each streamer can be up to 6 or even 8 km long, containing hundreds of channels and the seismic source is typically fired every 15 or 20 seconds.
A seismic vessel with 2 sources and towing a single streamer is known as a Narrow-Azimuth Towed Streamer (or NAZ or NATS). By the early 2000s, it was accepted that this type of acquisition was useful for initial exploration but inadequate for development and production, in which wells had to be accurately positioned. This led to the development of the Multi-Azimuth Towed Streamer (MAZ) which tried to break the limitations of the linear acquisition pattern of a NATS survey by acquiring a combination of NATS surveys at different azimuths (see diagram). This successfully delivered increased illumination of the subsurface and a better signal to noise ratio.
The seismic properties of salt poses an additional problem for marine seismic surveys, it attenuates seismic waves and its structure contains overhangs that are difficult to image. This led to another variation on the NATS survey type, the wide-azimuth towed streamer (or WAZ or WATS) and was first tested on the Mad Dog field in 2004. This type of survey involved 1 vessel solely towing a set of 8 streamers and 2 separate vessels towing seismic sources that were located at the start and end of the last receiver line (see diagram). This configuration was "tiled" 4 times, with the receiver vessel moving further away from the source vessels each time and eventually creating the effect of a survey with 4 times the number of streamers. The end result was a seismic dataset with a larger range of wider azimuths, delivering a breakthrough in seismic imaging. These are now the three common types of marine towed streamer seismic surveys.
Marine survey acquisition (ocean bottom seismic (OBS))
Marine survey acquisition is not just limited to seismic vessels; it is also possible to lay cables of geophones and hydrophones on the sea bed in a similar way to how cables are used in a land seismic survey, and use a separate source vessel. This method was originally developed out of operational necessity in order to enable seismic surveys to be conducted in areas with obstructions, such as production platforms, without having the compromise the resultant image quality. Ocean bottom cables (OBC) are also extensively used in other areas that a seismic vessel cannot be used, for example in shallow marine (water depth <300m) and transition zone environments, and can be deployed by remotely operated underwater vehicles (ROVs) in deep water when repeatability is valued (see 4D, below). Conventional OBC surveys use dual-component receivers, combining a pressure sensor (hydrophone) and a vertical particle velocity sensor (vertical geophone), but more recent developments have expanded the method to use four-component sensors i.e. a hydrophone and three orthogonal geophones. Four-component sensors have the advantage of being able to also record shear waves, which do not travel through water but can still contain valuable information.
In addition to the operational advantages, OBC also has geophysical advantages over a conventional NATS survey that arise from the increased fold and wider range of azimuths associated with the survey geometry. However, much like a land survey, the wider azimuths and increased fold come at a cost and the ability for large-scale OBC surveys is severely limited.
In 2005, ocean bottom nodes (OBN) – an extension of the OBC method that uses battery-powered cableless receivers placed in deep water – was first trialled over the Atlantis Oil Field in a partnership between BP and Fairfield Geotechnologies. The placement of these nodes can be more flexible than the cables in OBC and they are easier to store and deploy due to their smaller size and lower weight.
Time lapse acquisition (4D)
Time lapse or 4D surveys are 3D seismic surveys repeated after a period of time. The 4D refers to the fourth dimension which in this case is time. Time lapse surveys are acquired in order to observe reservoir changes during production and identify areas where there are barriers to flow that may not be detectable in conventional seismic. Time lapse surveys consist out of a baseline survey and a monitor or repeat survey, acquired after the field was under production. Most of these surveys have been repeated NATS surveys as they are cheaper to acquire and most fields historically already had a NATS baseline survey. Some of these surveys are collected using ocean-bottom cables because the cables can be accurately placed in their previous location after being removed. Better repetition of the exact source and receiver location leads to improved repeatability and better signal to noise ratios. A number of 4D surveys have also been set up over fields in which ocean bottom cables have been purchased and permanently deployed. This method can be known as life of field seismic (LoFS) or permanent reservoir monitoring (PRM).
OBN has proven to be another very good way to accurately repeat a seismic acquisition. The world's first 4D survey using nodes was acquired over the Atlantis Oil Field in 2009, with the nodes being placed by a ROV in a water depth of 1300–2200 m to within a few meters of where they were previously placed in 2005.
Seismic data processing
Deconvolution is a process that tries to extract the reflectivity series of the Earth, under the assumption that a seismic trace is just the reflectivity series of the Earth convolved with distorting filters. This process improves temporal resolution by collapsing the seismic wavelet, but it is nonunique unless further information is available such as well logs, or further assumptions are made. Deconvolution operations can be cascaded, with each individual deconvolution designed to remove a particular type of distortion.
CMP stacking is a robust process that uses the fact that a particular location in the subsurface will have been sampled numerous times and at different offsets. This allows a geophysicist to construct a group of traces with a range of offsets that all sample the same subsurface location, known as a Common Midpoint Gather. The average amplitude is then calculated along a time sample, resulting in significantly lowering the random noise but also losing all valuable information about the relationship between seismic amplitude and offset. Less significant processes that are applied shortly before the CMP stack are Normal moveout correction and statics correction. Unlike marine seismic data, land seismic data has to be corrected for the elevation differences between the shot and receiver locations. This correction is in the form of a vertical time shift to a flat datum and is known as a statics correction, but will need further correcting later in the processing sequence because the velocity of the near-surface is not accurately known. This further correction is known as a residual statics correction.
Seismic migration is the process by which seismic events are geometrically re-located in either space or time to the location the event occurred in the subsurface rather than the location that it was recorded at the surface, thereby creating a more accurate image of the subsurface.
The goal of seismic interpretation is to obtain a coherent geological story from the map of processed seismic reflections. At its most simple level, seismic interpretation involves tracing and correlating along continuous reflectors throughout the 2D or 3D dataset and using these as the basis for the geological interpretation. The aim of this is to produce structural maps that reflect the spatial variation in depth of certain geological layers. Using these maps hydrocarbon traps can be identified and models of the subsurface can be created that allow volume calculations to be made. However, a seismic dataset rarely gives a picture clear enough to do this. This is mainly because of the vertical and horizontal seismic resolution but often noise and processing difficulties also result in a lower quality picture. Due to this, there is always a degree of uncertainty in a seismic interpretation and a particular dataset could have more than one solution that fits the data. In such a case, more data will be needed to constrain the solution, for example in the form of further seismic acquisition, borehole logging or gravity and magnetic survey data. Similarly to the mentality of a seismic processor, a seismic interpreter is generally encouraged to be optimistic in order encourage further work rather than the abandonment of the survey area. Seismic interpretation is completed by both geologists and geophysicists, with most seismic interpreters having an understanding of both fields.
In hydrocarbon exploration, the features that the interpreter is particularly trying to delineate are the parts that make up a petroleum reservoir – the source rock, the reservoir rock, the seal and trap.
Seismic attribute analysis
Seismic attribute analysis involves extracting or deriving a quantity from seismic data that can be analysed in order to enhance information that might be more subtle in a traditional seismic image, leading to a better geological or geophysical interpretation of the data. Examples of attributes that can be analysed include mean amplitude, which can lead to the delineation of bright spots and dim spots, coherency and amplitude versus offset. Attributes that can show the presence of hydrocarbons are called direct hydrocarbon indicators.
The use of reflection seismology in studies of tectonics and the Earth's crust was pioneered in the 1970s by groups such as the Consortium for Continental Reflection Profiling (COCORP), who inspired deep seismic exploration in other countries such as BIRPS in Great Britain and ECORS in France. The British Institutions Reflection Profiling Syndicate (BIRPS) was started up as a result of oil hydrocarbon exploration in the North Sea. It became clear that there was a lack of understanding of the tectonic processes that had formed the geological structures and sedimentary basins which were being explored. The effort produced some significant results and showed that it is possible to profile features such as thrust faults that penetrate through the crust to the upper mantle with marine seismic surveys.
As with all human activities, seismic reflection surveys have some impact on the Earth's natural environment and both the hydrocarbon industry and environmental groups partake in research to investigate these effects.
On land, conducting a seismic survey may require the building of roads, for transporting equipment and personnel, and vegetation may need to be cleared for the deployment of equipment. If the survey is in a relatively undeveloped area, significant habitat disturbance may occur and many governments require seismic companies to follow strict rules regarding destruction of the environment; for example, the use of dynamite as a seismic source may be disallowed. Seismic processing techniques allow for seismic lines to deviate around natural obstacles, or use pre-existing non-straight tracks and trails. With careful planning, this can greatly reduce the environmental impact of a land seismic survey. The more recent use of inertial navigation instruments for land survey instead of theodolites decreased the impact of seismic by allowing the winding of survey lines between trees.
The main environmental concern for marine seismic surveys is the potential for noise associated with the high-energy seismic source to disturb or injure animal life, especially cetaceans such as whales, porpoises, and dolphins, as these mammals use sound as their primary method of communication with one another. High-level and long-duration sound can cause physical damage, such as hearing loss, whereas lower-level noise can cause temporary threshold shifts in hearing, obscuring sounds that are vital to marine life, or behavioural disturbance.
A study has shown that migrating humpback whales will leave a minimum 3 km gap between themselves and an operating seismic vessel, with resting humpback whale pods with cows exhibiting increased sensitivity and leaving an increased gap of 7–12 km. Conversely, the study found that male humpback whales were attracted to a single operating airgun as they were believed to have confused the low-frequency sound with that of whale breaching behaviour. In addition to whales, sea turtles, fish and squid all showed alarm and avoidance behaviour in the presence of an approaching seismic source. It is difficult to compare reports on the effects of seismic survey noise on marine life because methods and units are often inadequately documented.
The gray whale will avoid its regular migratory and feeding grounds by >30 km in areas of seismic testing. Similarly the breathing of gray whales was shown to be more rapid, indicating discomfort and panic in the whale. It is circumstantial evidence such as this that has led researchers to believe that avoidance and panic might be responsible for increased whale beachings although research is ongoing into these questions.
Offering another point of view, a joint paper from the International Association of Geophysical Contractors (IAGC) and the International Association of Oil and Gas Producers (IOGP) argue that the noise created by marine seismic surveys is comparable to natural sources of seismic noise, stating:
"The sound produced during seismic surveys is comparable in magnitude to many naturally occurring and other man-made sound sources. Furthermore, the specific characteristics of seismic sounds and the operational procedures employed during seismic surveys are such that the resulting risks to marine mammals are expected to be exceptionally low. In fact, three decades of world-wide seismic surveying activity and a variety of research projects have shown no evidence which would suggest that sound from E&P seismic activities has resulted in any physical or auditory injury to any marine mammal species."
- Protective measures are employed to address site-specific environmental conditions of each operation to ensure that sound exposure and vessel traffic do not harm marine mammals.
- Surveys planned to avoid known sensitive areas and time periods, such as breeding and feeding areas.
- Exclusion zones are typically established around the seismic source to further protect marine fauna from any potentially detrimental effects of sound. The exclusion zone is typically a circle with a radius of at least 500 meters around the sound source.
- Trained observers and listening devices are used to visually and acoustically monitor that zone for marine mammals and other protected species before any sound-producing operations begin. These observers help ensure adherence to the protective practices during operations and their detailed reports provide information on the biodiversity of the survey area to the local governments.
- Sound production typically begins with a “soft-start” or “ramp-up” that involves a gradual increase of the sound level from the air gun source from a very low level to full operational levels at the beginning of the seismic lines – usually over 20 to 40 minutes. This soft-start procedure is intended to allow time for any animal that may be close to the sound source to move away as the sound grows louder.
- Depth conversion, the conversion of acoustic waves two-way travel time to actual depth
- Exploration geophysics
- Passive seismic
- SEG-Y, a popular file format for seismic reflection data
- Seismic migration
- Seismic refraction
- Seismic Unix, open source software for processing of seismic reflection data
- Seismic wave
- Swell filter
- Synthetic seismogram
- Grusic, V., and Orlic, M., Early Observations of Rotor Clouds by Andrija Mohorovičić, Bulletin of the American Meteorological Society, May 2007, pp. 693–700, accessed 4 January 2010:
- W. M. Telford and others, Applied Geophysics (Cambridge Univ. Press, 1976) 220.
- Sheriff, R. E., and Geldart, L. P., 1995, Exploration Seismology, Second Edition, Cambridge University Press, pp. 3–6.
- E. E. Rosaire and Joseph H. Adler, "Applications and limitations of the dip method," Bulletin of the American Association of Petroleum Geologists, Jan. 1934, v.18 n.1 p.121.
- Sheriff, R. E., Geldart, L. P., (1995), 2nd Edition. Exploration Seismology. Cambridge University Press.
- "Physics and chemistry of the Earth's interior – Seismic reflection" (PDF). Retrieved 10 March 2015.
- Shuey, R. T.  A simplification of the Zoeppritz equations. Geophysics, 50:609–614
- Avseth, P, T Mukerji and G Mavko (2005). Quantitative seismic interpretation. Cambridge University Press, Cambridge, p. 183
- "Ground Roll". Schlumberger Oifield Glossary. Retrieved 8 September 2013.
- Zheng; Yingcai; et al. (2013). "Scholte waves generated by s eafloor topography". arXiv:1306.4383. Bibcode:2013arXiv1306.4383Z. Cite journal requires
- Dobrin, M. B., 1951, Dispersion in seismic surface waves, Geophysics, 16, 63–80.
- "Multiples Reflection". Schlumberger Oifield Glossary. Retrieved 8 September 2013.
- Pendrel, J. (2006). "Seismic Inversion—A Critical Tool in Reservoir Characterization". Scandinavian Oil-Gas Magazine (5/6): 19–22.
- Yilmaz, Öz (2001). Seismic data analysis. Society of Exploration Geophysicists. p. 1. ISBN 1-56080-094-1.
- Gochioco, L. M., Seismic surveys for coal exploration and mine planning. The Leading Edge, April 1990, v. 9, p. 25-28
- Milkereit, B.; Eaton, D.; Salisbury, M.; Adam, E.; Bohlen, Thomas (2003). "3D Seismic Imaging for Mineral Exploration" (PDF). Commission on Controlled-Source Seismology: Deep Seismic Methods. Retrieved 8 September 2013.
- "The Role of Geophysics In Geothermal Exploration". Quantec Geoscience. Retrieved 8 September 2013.
- Louie, John N.; Pullammanappallil, S. K. (2011). "Advanced seismic imaging for geothermal development" (PDF). New Zealand Geothermal Workshop 2011 Proceedings. Retrieved 8 September 2013.
- Dentith, Michael; Mudge, Stephen T. (24 April 2014). Geophysics for the Mineral Exploration Geoscientist. Cambridge University Press. doi:10.1017/cbo9781139024358. ISBN 9780521809511.
- "Transition Zone". Geokinetics. Retrieved 8 September 2013.
- Jon Cocker (2011). "Land 3-D Seismic Survey Designed To Meet New Objectives". E & P. Hart Energy. Retrieved 12 March 2012.s
- Gluyas, J; Swarbrick, R (2004). Petroleum Geoscience. Blackwell Publishing. p. 22. ISBN 978-0-632-03767-4.
- Sheriff, R. E., Geldart, L. P. (1995). Exploration Seismology (2nd ed.). Cambridge University Press. pp. 209–210. ISBN 0-521-46826-4.CS1 maint: multiple names: authors list (link)
- Sheriff, R. E., Geldart, L. P. (1995). Exploration Seismology (2nd ed.). Cambridge University Press. p. 200. ISBN 0-521-46826-4.CS1 maint: multiple names: authors list (link)
- Howe, D. et all (2008). "Independent simultaneous sweeping – a method to increase the productivity of land seismic crews". SEG Expanded Abstracts. SEG. 27: 2826–2830. doi:10.1190/1.3063932.
- Sheriff, R. E., Geldart, L. P. (1995). Exploration Seismology (2nd ed.). Cambridge University Press. p. 260. ISBN 0-521-46826-4.CS1 maint: multiple names: authors list (link)
- Barley, B. & Summers, T. (2007). "Multi-azimuth and wide-azimuth seismic: Shallow to deep water, exploration to production". The Leading Edge. SEG. 26 (4): 450–458. doi:10.1190/1.2723209. Retrieved 8 September 2013.
- Mike Howard (2007). "Marine seismic surveys with enhanced azimuth coverage: Lessons in survey design and acquisition" (PDF). The Leading Edge. SEG. 26 (4): 480–493. doi:10.1190/1.2723212. Retrieved 8 September 2013.
- Threadgold, I; et al. (2006). "Implementing a wide azimuth towed streamer field trial: the what, why and mostly how of WATS in Southern Green Canyon". SEG Expanded Abstracts. SEG. 25: 2901–2904. doi:10.1190/1.2370129. Retrieved 8 September 2013.
- "Ocean Bottom Cable". Schlumberger Oifield Glossary. Retrieved 8 September 2013.
- "Four-Component Seismic Data". Schlumberger Oilfield Glossary. Retrieved 8 September 2013.
- Stewart, J.; Shatilo, A (2004). "A comparison of streamer and OBC seismic data at Beryl Alpha field, UK North Sea". SEG Expanded Abstracts. SEG. 23: 841–844. doi:10.1190/1.1845303.
- Beaudoin, G. (2010). "Imaging the invisible — BP's path to OBS nodes". SEG Expanded Abstracts. SEG. 29: 3734–3739. doi:10.1190/1.3513626.
- Barley, B. & Summers, T. (2007). "Multi-azimuth and wide-azimuth seismic: Shallow to deep water, exploration to production". The Leading Edge. SEG. 26 (4): 456–457. doi:10.1190/1.2723209. Retrieved 8 September 2013.
- Beaudoin, G.; Reasnor, M. (2010). "Atlantis time-lapse ocean bottom node survey: a project team's journey from acquisition through processing". SEG Expanded Abstracts. SEG (29): 4155.
- Yilmaz, Öz (2001). Seismic data analysis. Society of Exploration Geophysicists. p. 4. ISBN 1-56080-094-1.
- Sheriff, R. E., Geldart, L. P. (1995). Exploration Seismology (2nd ed.). Cambridge University Press. p. 292. ISBN 0-521-46826-4.CS1 maint: multiple names: authors list (link)
- "Common-midpoint". Schlumberger Oifield Glossary. Retrieved 8 September 2013.
- Gluyas, J; Swarbrick, R (2004). Petroleum Geoscience. Blackwell Publishing. p. 24. ISBN 978-0-632-03767-4.
- Basics of Seismic Interpretation
- Sheriff, R. E., Geldart, L. P. (1995). Exploration Seismology (2nd ed.). Cambridge University Press. p. 349. ISBN 0-521-46826-4.CS1 maint: multiple names: authors list (link)
- "Petrel Seismic Attribute Analysis". Schlumberger. Retrieved 8 September 2013.
- "Consortium for Continental Reflection Profiling". Retrieved 6 March 2012.
- Crustal Architecture and Images. "BIRPS". Retrieved 6 March 2012.
- Richardson, W. John; et al. (1995). Marine Mammals and Noise. Academic Press. p. 1. ISBN 978-0-12-588441-9.
- Gausland, I. (2000). "Impact of seismic surveys on marine life" (PDF). The Leading Edge. SEG: 904. Retrieved 8 March 2012.
- McCauley, R.D.; et al. (2000). "Marine seismic surveys: A study of environmental implications" (PDF). APPEA. 40: 692–708. doi:10.1071/AJ99048. Retrieved 8 March 2012.
- Scientific Surveys and Marine Mammals – Joint OGP/IAGC Position Paper, December 2008 – "Archived copy" (PDF). Archived from the original (PDF) on 16 July 2011. Retrieved 12 September 2010.CS1 maint: archived copy as title (link)
- Recommended monitoring and mitigation measures for cetaceans during marine seismic survey geophysical operations. IOGP. 2017.
The following books cover important topics in reflection seismology. Most require some knowledge of mathematics, geology, and/or physics at the university level or above.
- Brown, Alistair R. (2004). Interpretation of three-dimensional seismic data (sixth ed.). Society of Exploration Geophysicists and American Association of Petroleum Geologists. ISBN 0-89181-364-0.
- Biondi, B. (2006). 3d Seismic Imaging: Three Dimensional Seismic Imaging. Society of Exploration Geophysicists. ISBN 0-07-011117-0.
- Claerbout, Jon F. (1976). Fundamentals of geophysical data processing. McGraw-Hill. ISBN 1-56080-137-9.
- Ikelle, Luc T. & Lasse Amundsen (2005). Introduction to Petroleum Seismology. Society of Exploration Geophysicists. ISBN 1-56080-129-8.
- Scales, John (1997). Theory of seismic imaging. Golden, Colorado: Samizdat Press. Archived from the original on 18 August 2015.
- Yilmaz, Öz (2001). Seismic data analysis. Society of Exploration Geophysicists. ISBN 1-56080-094-1.
- Milsom, J., University College of London (2005). Field Geophysics. Wiley Publications. ISBN 978-0-470-84347-5.CS1 maint: multiple names: authors list (link)
- Chapman, C.H.. (2004). Fundamentals of Seismic Wave Propagation. Cambridge University Press. ISBN 978-0-521-81538-3.
Further research in reflection seismology may be found particularly in books and journals of the Society of Exploration Geophysicists, the American Geophysical Union, and the European Association of Geoscientists and Engineers.
- Biography of Henry Salvatori
- Proving That The Seismic Reflection Method Really Works – Geophysical Society of Tulsa
- Reflection Seismology Literature at Stanford Exploration Project
- Website of the International Association of Geophysical Contractors
- IAGC/IOGP position paper on seismic surveys and marine mammals (PDF)
- Tutorial on seismic reflection data processing
- Information about using Seismic Survey in oil and gas exploration in Australia