Early steam locomotives normally traveled forwards only. Although reverse operations capabilities were soon built into locomotive mechanisms, the controls were normally optimized for forward travel, and the locomotives often could not operate as well in reverse. Some passenger cars, such as observation cars, were also designed as late as the 1960s for operations in a particular direction. Turntables allowed locomotives or other rolling stock to be turned around for the return journey, and roundhouses, designed to radiate around the turntables, were built to service and store these locomotives.
Most modern diesel and electric locomotives can run equally well in either direction, and many are push-pull trains with control cabs at each end. In addition, railroads often use multiple locomotives to pull trains, and even with locomotives that have distinct front and rear ends, the engines at opposing ends of a locomotive "consist" (a group of locomotives coupled together and controlled as a single unit) can be aligned so they face opposite directions. With such a setup, trains needing to reverse direction can use a technique known as a "run around," in which the engines are uncoupled from the train, pull around it on an adjacent track or siding, and reattach at the other end. The engineer changes operating ends from the original locomotive to the one on the opposite end of the locomotive consist.
Railroad terminals also use features such as balloon loops and wyes (Commonwealth: triangle) to reverse the orientation of railroad equipment. Because of the advent of these practices, modern roundhouses are frequently not round and are simply large buildings used for servicing locomotives. Like much other railroad terminology, however, the structure has retained its traditional name. The alternative term engine-house encompasses both semi-circular and rectangular structures and broadly describes all buildings intended for storage and servicing of locomotives. Shops or workshops are buildings containing hoists and heavy machinery capable of major repairs beyond routine servicing. Some roundhouses include shop facilities internally or in adjoining buildings.
Since the great dieselisation era of the 1940s and 1950s, many roundhouses have been demolished or put to other uses, but a few still stand and remain in use on the railroads. Early roundhouses were too small for later locomotives. The unusual shape of the buildings can make them difficult to adapt to new uses, but can also be aesthetically appealing.
The London Roundhouse Project London, Ontario, Canada, is an extensive renovation of the Michigan Central Railroad steam locomotive repair shop which was built in 1887. It is to become the new home of Ellipsis Digital and Engine SevenFour, a pair of emerging technology companies.
The Canadian National Railways roundhouse at the Turcot Yard in Montreal, built in 1906, was the largest ever built in Canada. Its demolition in 1962 to make way for the Turcot Interchange illustrated a profound change in transportation habits across North America.
The museum roundhouse in Wolsztyn, in western Poland, continues to supply steam locomotives for regular national rail services (as of 2011).
Probably the first railway roundhouse was built in 1839 at Derby, England by the North Midland Railway. The Derby roundhouse was restored in 2010, being converted into a brand new site for Derby College, with a new addition called the 'Stephenson Building' including the other survival of demolition - the original Midland Counties Railway workshop. The new site was opened in September 2009. Tours can be arranged through Derby Tourist Information Centre.
The Fenton, Murray and Jackson building in Leeds (1831–1843), a private workshop, may previously have been laid out in a radial pattern like a roundhouse. In a guidebook of the time we are told "The engine-house is a polygon of sixteen sides, and 190 feet (58 m) in diameter, lighted from a dome-shaped roof, of the height of 50 feet (15 m). It contains 16 lines of rails, radiating from a single turn-table in the centre: the engines, on their arrival, are taken in there, placed upon the turn-table, and wheeled into any stall that may be vacant. Each of the 16 stalls will hold two, or perhaps more, engines." This roundhouse narrowly escaped demolition when the works closed down, and was classified as a listed building.
Barrow Hill Engine Shed, which is home to a number of preserved locomotives is still in use.
United States of America
The roundhouse in Aurora, Illinois, constructed in 1856, was purchased and restored by NFL football player Walter Payton. After Payton's death, the roundhouse was occupied by a micro-brewery and renamed Two Brothers Roundhouse, with a plaque mounted in Payton's honor.
The vast majority of roundhouses built in the US and Canada no longer exist, lie in ruins, or have been repurposed; however, a small number of them still exist and continue to operate in their intended capacity as locomotive storing and servicing facilities. Below is a list of locations with operational roundhouses that are also open to the public.
|Location||Address||Track gauge||Number of intact stalls in use||Year built||Notes|
|Age of Steam Roundhouse||Sugarcreek, Ohio, US||4 ft 8 1⁄2 in (1,435 mm)||18||2011||Only open on select Saturdays to tour groups with forty people or more|
|Colorado Railroad Museum||Golden, Colorado, US||3 ft (914 mm)||5||2000|
|Como Roundhouse, Railroad Depot and Hotel Complex||Como, Colorado, US||3 ft (914 mm)||2||1881|
|Connecticut Eastern Railroad Museum||Willimantic, Connecticut, US||4 ft 8 1⁄2 in (1,435 mm)||
|Durango & Silverton Narrow Gauge Railroad||Durango, Colorado, US||3 ft (914 mm)||7||1990||Replica; utilizes parts from original structure built in 1881 on same site, which burned down in 1989|
|East Broad Top Railroad and Coal Company||Rockhill Furnace, Pennsylvania, US||3 ft (914 mm)||8||1882|
|Heritage Park Historical Village||Calgary, Alberta, Canada||4 ft 8 1⁄2 in (1,435 mm)||6||1981||Replica|
|North Carolina Transportation Museum||Spencer, North Carolina, US||4 ft 8 1⁄2 in (1,435 mm)||6||1924|
|Railtown 1897 State Historic Park||Jamestown, California, US||4 ft 8 1⁄2 in (1,435 mm)||6||1910|
|Steamtown National Historic Site||Scranton, Pennsylvania, US||4 ft 8 1⁄2 in (1,435 mm)||13||1902|
|Union Pacific Roundhouse||Cheyenne, Wyoming, US||4 ft 8 1⁄2 in (1,435 mm)||7||1931||Used to store and maintain the Union Pacific Heritage Fleet; only open during third weekend of May|
|Weiser Railroad (Greenfield Village)||Dearborn, Michigan, US||4 ft 8 1⁄2 in (1,435 mm)||6||2000||Replica; utilizes parts from original structure built in 1884 in Marshall, Michigan|
- The Elements of Railroad Engineering, 5th Edition, 1937, William G. Raymond. Published by John Wiley and Sons, New York
- Steam Works, 1994, Derek Huntriss. Published by Ian Allan ISBN 0-7110-2269-0
- The North Midland Railway Guide, 1842, Nottingham: R. Allen. Republished (1973) by Turntable Enterprises, Leeds
- PRNewswire press release, September 15, 2004.
- "Annual Report 2000" (PDF). The Henry Ford. Retrieved August 4, 2016.
- "Riding the Rails – Connecticut Eastern Railroad Museum – Train Aficionado". www.trainaficionado.com. Retrieved 2018-10-19.
- Heritage Park Historical Village – Railway Roundhouse
- "Union Pacific Roundhouse Turntable and Machine Shop".
|Wikimedia Commons has media related to Roundhouses.|