Quantum dots (QDs) are tiny semiconductor particles a few nanometres in size, having optical and electronic properties that differ from larger particles due to quantum mechanics. They are a central topic in nanotechnology. When the quantum dots are illuminated by UV light, an electron in the quantum dot can be excited to a state of higher energy. In the case of a semiconducting quantum dot, this process corresponds to the transition of an electron from the valence band to the conductance band. The excited electron can drop back into the valence band releasing its energy by the emission of light. This light emission (photoluminescence) is illustrated in the figure on the right. The color of that light depends on the energy difference between the conductance band and the valence band.
In the language of materials science, nanoscale semiconductor materials tightly confine either electrons or electron holes. Quantum dots are sometimes referred to as artificial atoms, emphasizing their singularity, having bound, discrete electronic states, like naturally occurring atoms or molecules.
Quantum dots have properties intermediate between bulk semiconductors and discrete atoms or molecules. Their optoelectronic properties change as a function of both size and shape. Larger QDs of 5–6 nm diameter emit longer wavelengths, with colors such as orange or red. Smaller QDs (2–3 nm) emit shorter wavelengths, yielding colors like blue and green. However, the specific colors vary depending on the exact composition of the QD.
Potential applications of quantum dots include single-electron transistors, solar cells, LEDs, lasers, single-photon sources, second-harmonic generation, quantum computing, and medical imaging. Their small size allows for some QDs to be suspended in solution, which may lead to use in inkjet printing and spin-coating. They have been used in Langmuir-Blodgett thin-films. These processing techniques result in less expensive and less time-consuming methods of semiconductor fabrication.
|Part of a series of articles on|
There are several ways to fabricate quantum dots. Possible methods include colloidal synthesis, self-assembly, and electrical gating.
Colloidal semiconductor nanocrystals are synthesized from solutions, much like traditional chemical processes. The main difference is the product neither precipitates as a bulk solid nor remains dissolved. Heating the solution at high temperature, the precursors decompose forming monomers which then nucleate and generate nanocrystals. Temperature is a critical factor in determining optimal conditions for the nanocrystal growth. It must be high enough to allow for rearrangement and annealing of atoms during the synthesis process while being low enough to promote crystal growth. The concentration of monomers is another critical factor that has to be stringently controlled during nanocrystal growth. The growth process of nanocrystals can occur in two different regimes, "focusing" and "defocusing". At high monomer concentrations, the critical size (the size where nanocrystals neither grow nor shrink) is relatively small, resulting in growth of nearly all particles. In this regime, smaller particles grow faster than large ones (since larger crystals need more atoms to grow than small crystals) resulting in "focusing" of the size distribution, yielding an improbable distribution of nearly monodispersed particles. The size focusing is optimal when the monomer concentration is kept such that the average nanocrystal size present is always slightly larger than the critical size. Over time, the monomer concentration diminishes, the critical size becomes larger than the average size present, and the distribution "defocuses".
There are colloidal methods to produce many different semiconductors. Typical dots are made of binary compounds such as lead sulfide, lead selenide, cadmium selenide, cadmium sulfide, cadmium telluride, indium arsenide, and indium phosphide. Dots may also be made from ternary compounds such as cadmium selenide sulfide. Further, recent advances have been made which allow for synthesis of colloidal perovskite quantum dots. These quantum dots can contain as few as 100 to 100,000 atoms within the quantum dot volume, with a diameter of ≈10 to 50 atoms. This corresponds to about 2 to 10 nanometers, and at 10 nm in diameter, nearly 3 million quantum dots could be lined up end to end and fit within the width of a human thumb.
Large batches of quantum dots may be synthesized via colloidal synthesis. Due to this scalability and the convenience of benchtop conditions, colloidal synthetic methods are promising for commercial applications. It is acknowledged to be the least toxic of all the different forms of synthesis.
Plasma synthesis has evolved to be one of the most popular gas-phase approaches for the production of quantum dots, especially those with covalent bonds. For example, silicon (Si) and germanium (Ge) quantum dots have been synthesized by using nonthermal plasma. The size, shape, surface and composition of quantum dots can all be controlled in nonthermal plasma. Doping that seems quite challenging for quantum dots has also been realized in plasma synthesis. Quantum dots synthesized by plasma are usually in the form of powder, for which surface modification may be carried out. This can lead to excellent dispersion of quantum dots in either organic solvents or water (i. e., colloidal quantum dots).
- Self-assembled quantum dots are typically between 5 and 50 nm in size. Quantum dots defined by lithographically patterned gate electrodes, or by etching on two-dimensional electron gasses in semiconductor heterostructures can have lateral dimensions between 20 and 100 nm.
- Some quantum dots are small regions of one material buried in another with a larger band gap. These can be so-called core–shell structures, e.g., with CdSe in the core and ZnS in the shell, or from special forms of silica called ormosil. Sub-monolayer shells can also be effective ways of passivating the quantum dots, such as PbS cores with sub-monolayer CdS shells.
- Quantum dots sometimes occur spontaneously in quantum well structures due to monolayer fluctuations in the well's thickness.
- Self-assembled quantum dots nucleate spontaneously under certain conditions during molecular beam epitaxy (MBE) and metalorganic vapour-phase epitaxy (MOVPE), when a material is grown on a substrate to which it is not lattice matched. The resulting strain leads to the formation of islands on top of a two-dimensional wetting layer. This growth mode is known as Stranski–Krastanov growth. The islands can be subsequently buried to form the quantum dot. A widely used type of quantum dots grown with this method are In(Ga)As quantum dots in GaAs. Such quantum dots have the potential for applications in quantum cryptography (i.e. single photon sources) and quantum computation. The main limitations of this method are the cost of fabrication and the lack of control over positioning of individual dots.
- Individual quantum dots can be created from two-dimensional electron or hole gases present in remotely doped quantum wells or semiconductor heterostructures called lateral quantum dots. The sample surface is coated with a thin layer of resist. A lateral pattern is then defined in the resist by electron beam lithography. This pattern can then be transferred to the electron or hole gas by etching, or by depositing metal electrodes (lift-off process) that allow the application of external voltages between the electron gas and the electrodes. Such quantum dots are mainly of interest for experiments and applications involving electron or hole transport, i.e., an electrical current.
- The energy spectrum of a quantum dot can be engineered by controlling the geometrical size, shape, and the strength of the confinement potential. Also, in contrast to atoms, it is relatively easy to connect quantum dots by tunnel barriers to conducting leads, which allows the application of the techniques of tunneling spectroscopy for their investigation.
The quantum dot absorption features correspond to transitions between discrete, three-dimensional particle in a box states of the electron and the hole, both confined to the same nanometer-size box.These discrete transitions are reminiscent of atomic spectra and have resulted in quantum dots also being called artificial atoms.
- Confinement in quantum dots can also arise from electrostatic potentials (generated by external electrodes, doping, strain, or impurities).
- Complementary metal-oxide-semiconductor (CMOS) technology can be employed to fabricate silicon quantum dots. Ultra small (L=20 nm, W=20 nm) CMOS transistors behave as single electron quantum dots when operated at cryogenic temperature over a range of −269 °C (4 K) to about −258 °C (15 K). The transistor displays Coulomb blockade due to progressive charging of electrons one by one. The number of electrons confined in the channel is driven by the gate voltage, starting from an occupation of zero electrons, and it can be set to 1 or many.
Genetically engineered M13 bacteriophage viruses allow preparation of quantum dot biocomposite structures. It had previously been shown that genetically engineered viruses can recognize specific semiconductor surfaces through the method of selection by combinatorial phage display. Additionally, it is known that liquid crystalline structures of wild-type viruses (Fd, M13, and TMV) are adjustable by controlling the solution concentrations, solution ionic strength, and the external magnetic field applied to the solutions. Consequently, the specific recognition properties of the virus can be used to organize inorganic nanocrystals, forming ordered arrays over the length scale defined by liquid crystal formation. Using this information, Lee et al. (2000) were able to create self-assembled, highly oriented, self-supporting films from a phage and ZnS precursor solution. This system allowed them to vary both the length of bacteriophage and the type of inorganic material through genetic modification and selection.
Highly ordered arrays of quantum dots may also be self-assembled by electrochemical techniques. A template is created by causing an ionic reaction at an electrolyte-metal interface which results in the spontaneous assembly of nanostructures, including quantum dots, onto the metal which is then used as a mask for mesa-etching these nanostructures on a chosen substrate.
Quantum dot manufacturing relies on a process called "high temperature dual injection" which has been scaled by multiple companies for commercial applications that require large quantities (hundreds of kilograms to tonnes) of quantum dots. This reproducible production method can be applied to a wide range of quantum dot sizes and compositions.
The bonding in certain cadmium-free quantum dots, such as III-V-based quantum dots, is more covalent than that in II-VI materials, therefore it is more difficult to separate nanoparticle nucleation and growth via a high temperature dual injection synthesis. An alternative method of quantum dot synthesis, the "molecular seeding" process, provides a reproducible route to the production of high quality quantum dots in large volumes. The process utilises identical molecules of a molecular cluster compound as the nucleation sites for nanoparticle growth, thus avoiding the need for a high temperature injection step. Particle growth is maintained by the periodic addition of precursors at moderate temperatures until the desired particle size is reached. The molecular seeding process is not limited to the production of cadmium-free quantum dots; for example, the process can be used to synthesise kilogram batches of high quality II-VI quantum dots in just a few hours.
Another approach for the mass production of colloidal quantum dots can be seen in the transfer of the well-known hot-injection methodology for the synthesis to a technical continuous flow system. The batch-to-batch variations arising from the needs during the mentioned methodology can be overcome by utilizing technical components for mixing and growth as well as transport and temperature adjustments. For the production of CdSe based semiconductor nanoparticles this method has been investigated and tuned to production amounts of kg per month. Since the use of technical components allows for easy interchange in regards of maximum through-put and size, it can be further enhanced to tens or even hundreds of kilograms.
In 2011 a consortium of U.S. and Dutch companies reported a "milestone" in high volume quantum dot manufacturing by applying the traditional high temperature dual injection method to a flow system.
On January 23, 2013 Dow entered into an exclusive licensing agreement with UK-based Nanoco for the use of their low-temperature molecular seeding method for bulk manufacture of cadmium-free quantum dots for electronic displays, and on September 24, 2014 Dow commenced work on the production facility in South Korea capable of producing sufficient quantum dots for "millions of cadmium-free televisions and other devices, such as tablets". Mass production is due to commence in mid-2015. On 24 March 2015 Dow announced a partnership deal with LG Electronics to develop the use of cadmium free quantum dots in displays.
Heavy-metal-free quantum dots
In many regions of the world there is now a restriction or ban on the use of heavy metals in many household goods, which means that most cadmium-based quantum dots are unusable for consumer-goods applications.
For commercial viability, a range of restricted, heavy-metal-free quantum dots has been developed showing bright emissions in the visible and near infra-red region of the spectrum and have similar optical properties to those of CdSe quantum dots. Among these systems are InP/ZnS and CuInS/ZnS, for example.
Peptides are being researched as potential quantum dot material. Since peptides occur naturally in all organisms, such dots would likely be nontoxic and easily biodegraded.
Health and safety
Some quantum dots pose risks to human health and the environment under certain conditions. Notably, the studies on quantum dot toxicity have focused on cadmium containing particles and have yet to be demonstrated in animal models after physiologically relevant dosing. In vitro studies, based on cell cultures, on quantum dots (QD) toxicity suggest that their toxicity may derive from multiple factors including their physicochemical characteristics (size, shape, composition, surface functional groups, and surface charges) and their environment. Assessing their potential toxicity is complex as these factors include properties such as QD size, charge, concentration, chemical composition, capping ligands, and also on their oxidative, mechanical and photolytic stability.
Many studies have focused on the mechanism of QD cytotoxicity using model cell cultures. It has been demonstrated that after exposure to ultraviolet radiation or oxidation by air, CdSe QDs release free cadmium ions causing cell death. Group II-VI QDs also have been reported to induce the formation of reactive oxygen species after exposure to light, which in turn can damage cellular components such as proteins, lipids and DNA. Some studies have also demonstrated that addition of a ZnS shell inhibits the process of reactive oxygen species in CdSe QDs. Another aspect of QD toxicity is that there are, in vivo, size dependent intracellular pathways that concentrate these particles in cellular organelles that are inaccessible by metal ions, which may result in unique patterns of cytotoxicity compared to their constituent metal ions. The reports of QD localization in the cell nucleus present additional modes of toxicity because they may induce DNA mutation, which in turn will propagate through future generation of cells causing diseases.
Although concentration of QDs in certain organelles have been reported in in vivo studies using animal models, no alterations in animal behavior, weight, hematological markers or organ damage has been found through either histological or biochemical analysis. These finding have led scientists to believe that intracellular dose is the most important deterring factor for QD toxicity. Therefore, factors determining the QD endocytosis that determine the effective intracellular concentration, such as QD size, shape and surface chemistry determine their toxicity. Excretion of QDs through urine in animal models also have demonstrated via injecting radio-labeled ZnS capped CdSe QDs where the ligand shell was labelled with 99mTc. Though multiple other studies have concluded retention of QDs in cellular levels, exocytosis of QDs is still poorly studied in the literature.
While significant research efforts have broadened the understanding of toxicity of QDs, there are large discrepancies in the literature and questions still remains to be answered. Diversity of this class material as compared to normal chemical substances makes the assessment of their toxicity very challenging. As their toxicity may also be dynamic depending on the environmental factors such as pH level, light exposure and cell type, traditional methods of assessing toxicity of chemicals such as LD50 are not applicable for QDs. Therefore, researchers are focusing on introducing novel approaches and adapting existing methods to include this unique class of materials. Furthermore, novel strategies to engineer safer QDs are still under exploration by the scientific community. A recent novelty in the field is the discovery of carbon quantum dots, a new generation of optically-active nanoparticles potentially capable of replacing semiconductor QDs, but with the advantage of much lower toxicity.
In semiconductors, light absorption generally leads to an electron being excited from the valence to the conduction band, leaving behind a hole. The electron and the hole can bind to each other to form an exciton. When this exciton recombines (i.e. the electron resumes its ground state), the exciton's energy can be emitted as light. This is called fluorescence. In a simplified model, the energy of the emitted photon can be understood as the sum of the band gap energy between the highest occupied level and the lowest unoccupied energy level, the confinement energies of the hole and the excited electron, and the bound energy of the exciton (the electron-hole pair):
As the confinement energy depends on the quantum dot's size, both absorption onset and fluorescence emission can be tuned by changing the size of the quantum dot during its synthesis. The larger the dot, the redder (lower energy) its absorption onset and fluorescence spectrum. Conversely, smaller dots absorb and emit bluer (higher energy) light. Recent articles in Nanotechnology and in other journals have begun to suggest that the shape of the quantum dot may be a factor in the coloration as well, but as yet not enough information is available. Furthermore, it was shown that the lifetime of fluorescence is determined by the size of the quantum dot. Larger dots have more closely spaced energy levels in which the electron-hole pair can be trapped. Therefore, electron-hole pairs in larger dots live longer causing larger dots to show a longer lifetime.
To improve fluorescence quantum yield, quantum dots can be made with "shells" of a larger bandgap semiconductor material around them. The improvement is suggested to be due to the reduced access of electron and hole to non-radiative surface recombination pathways in some cases, but also due to reduced Auger recombination in others.
Quantum dots are particularly promising for optical applications due to their high extinction coefficient. They operate like a single electron transistor and show the Coulomb blockade effect. Quantum dots have also been suggested as implementations of qubits for quantum information processing, and as active elements for thermoelectrics.
Tuning the size of quantum dots is attractive for many potential applications. For instance, larger quantum dots have a greater spectrum-shift towards red compared to smaller dots, and exhibit less pronounced quantum properties. Conversely, the smaller particles allow one to take advantage of more subtle quantum effects.
Being zero-dimensional, quantum dots have a sharper density of states than higher-dimensional structures. As a result, they have superior transport and optical properties. They have potential uses in diode lasers, amplifiers, and biological sensors. Quantum dots may be excited within a locally enhanced electromagnetic field produced by gold nanoparticles, which can then be observed from the surface plasmon resonance in the photoluminescent excitation spectrum of (CdSe)ZnS nanocrystals. High-quality quantum dots are well suited for optical encoding and multiplexing applications due to their broad excitation profiles and narrow/symmetric emission spectra. The new generations of quantum dots have far-reaching potential for the study of intracellular processes at the single-molecule level, high-resolution cellular imaging, long-term in vivo observation of cell trafficking, tumor targeting, and diagnostics.
CdSe nanocrystals are efficient triplet photosensitizers. Laser excitation of small CdSe nanoparticles enables the extraction of the excited state energy from the Quantum Dots into bulk solution, thus opening the door to a wide range of potential applications such as photodynamic therapy, photovoltaic devices, molecular electronics, and catalysis.
In modern biological analysis, various kinds of organic dyes are used. However, as technology advances, greater flexibility in these dyes is sought. To this end, quantum dots have quickly filled in the role, being found to be superior to traditional organic dyes on several counts, one of the most immediately obvious being brightness (owing to the high extinction coefficient combined with a comparable quantum yield to fluorescent dyes) as well as their stability (allowing much less photobleaching). It has been estimated that quantum dots are 20 times brighter and 100 times more stable than traditional fluorescent reporters. For single-particle tracking, the irregular blinking of quantum dots is a minor drawback. However, there have been groups which have developed quantum dots which are essentially nonblinking and demonstrated their utility in single molecule tracking experiments.
The use of quantum dots for highly sensitive cellular imaging has seen major advances. The improved photostability of quantum dots, for example, allows the acquisition of many consecutive focal-plane images that can be reconstructed into a high-resolution three-dimensional image. Another application that takes advantage of the extraordinary photostability of quantum dot probes is the real-time tracking of molecules and cells over extended periods of time. Antibodies, streptavidin, peptides, DNA, nucleic acid aptamers, or small-molecule ligands can be used to target quantum dots to specific proteins on cells. Researchers were able to observe quantum dots in lymph nodes of mice for more than 4 months.
Quantum dots can have antibacterial properties similar to nanoparticles and can kill bacteria in a dose-dependent manner. One mechanism by which quantum dots can kill bacteria is through impairing the functions of antioxidative system in the cells and down regulating the antioxidative genes. In addition, quantum dots can directly damage the cell wall. Quantum dots have been shown to be effective against both gram- positive and gram-negative bacteria.
Semiconductor quantum dots have also been employed for in vitro imaging of pre-labeled cells. The ability to image single-cell migration in real time is expected to be important to several research areas such as embryogenesis, cancer metastasis, stem cell therapeutics, and lymphocyte immunology.
One application of quantum dots in biology is as donor fluorophores in Förster resonance energy transfer, where the large extinction coefficient and spectral purity of these fluorophores make them superior to molecular fluorophores It is also worth noting that the broad absorbance of QDs allows selective excitation of the QD donor and a minimum excitation of a dye acceptor in FRET-based studies. The applicability of the FRET model, which assumes that the Quantum Dot can be approximated as a point dipole, has recently been demonstrated
The use of quantum dots for tumor targeting under in vivo conditions employ two targeting schemes: active targeting and passive targeting. In the case of active targeting, quantum dots are functionalized with tumor-specific binding sites to selectively bind to tumor cells. Passive targeting uses the enhanced permeation and retention of tumor cells for the delivery of quantum dot probes. Fast-growing tumor cells typically have more permeable membranes than healthy cells, allowing the leakage of small nanoparticles into the cell body. Moreover, tumor cells lack an effective lymphatic drainage system, which leads to subsequent nanoparticle-accumulation.
Quantum dot probes exhibit in vivo toxicity. For example, CdSe nanocrystals are highly toxic to cultured cells under UV illumination, because the particles dissolve, in a process known as photolysis, to release toxic cadmium ions into the culture medium. In the absence of UV irradiation, however, quantum dots with a stable polymer coating have been found to be essentially nontoxic. Hydrogel encapsulation of quantum dots allows for quantum dots to be introduced into a stable aqueous solution, reducing the possibility of cadmium leakage.Then again, only little is known about the excretion process of quantum dots from living organisms.
Delivery of undamaged quantum dots to the cell cytoplasm has been a challenge with existing techniques. Vector-based methods have resulted in aggregation and endosomal sequestration of quantum dots while electroporation can damage the semi-conducting particles and aggregate delivered dots in the cytosol. Via cell squeezing, quantum dots can be efficiently delivered without inducing aggregation, trapping material in endosomes, or significant loss of cell viability. Moreover, it has shown that individual quantum dots delivered by this approach are detectable in the cell cytosol, thus illustrating the potential of this technique for single molecule tracking studies.
The tunable absorption spectrum and high extinction coefficients of quantum dots make them attractive for light harvesting technologies such as photovoltaics. Quantum dots may be able to increase the efficiency and reduce the cost of today's typical silicon photovoltaic cells. According to an experimental proof from 2004, quantum dots of lead selenide can produce more than one exciton from one high energy photon via the process of carrier multiplication or multiple exciton generation (MEG). This compares favorably to today's photovoltaic cells which can only manage one exciton per high-energy photon, with high kinetic energy carriers losing their energy as heat. Quantum dot photovoltaics would theoretically be cheaper to manufacture, as they can be made "using simple chemical reactions."
Quantum dot only solar cells
Aromatic self-assembled monolayers (SAMs) (e.g. 4-nitrobenzoic acid) can be used to improve the band alignment at electrodes for better efficiencies. This technique has provided a record power conversion efficiency (PCE) of 10.7%. The SAM is positioned between ZnO-PbS colloidal quantum dot (CQD) film junction to modify band alignment via the dipole moment of the constituent SAM molecule, and the band tuning may be modified via the density, dipole and the orientation of the SAM molecule.
Quantum dot in hybrid solar cells
Colloidal quantum dots are also used in inorganic/organic hybrid solar cells. These solar cells are attractive because of the potential for low-cost fabrication and relatively high efficiency. Incorporation of metal oxides, such as ZnO, TiO2, and Nb2O5 nanomaterials into organic photovoltaics have been commercialized using full roll-to-roll processing. A 13.2% power conversion efficiency is claimed in Si nanowire/PEDOT:PSS hybrid solar cells.
Quantum dot with nanowire in solar cells
Another potential use involves capped single-crystal ZnO nanowires with CdSe quantum dots, immersed in mercaptopropionic acid as hole transport medium in order to obtain a QD-sensitized solar cell. The morphology of the nanowires allowed the electrons to have a direct pathway to the photoanode. This form of solar cell exhibits 50–60% internal quantum efficiencies.
Nanowires with quantum dot coatings on silicon nanowires (SiNW) and carbon quantum dots. The use of SiNWs instead of planar silicon enhances the antiflection properties of Si. The SiNW exhibits a light-trapping effect due to light trapping in the SiNW. This use of SiNWs in conjunction with carbon quantum dots resulted in a solar cell that reached 9.10% PCE.
Graphene quantum dots have also been blended with organic electronic materials to improve efficiency and lower cost in photovoltaic devices and organic light emitting diodes (OLEDs) in compared to graphene sheets. These graphene quantum dots were functionalized with organic ligands that experience photoluminescence from UV-Vis absorption.
Light emitting diodes
Several methods are proposed for using quantum dots to improve existing light-emitting diode (LED) design, including "Quantum Dot Light Emitting Diode" (QD-LED or QLED) displays and "Quantum Dot White Light Emitting Diode" (QD-WLED) displays. Because Quantum dots naturally produce monochromatic light, they can be more efficient than light sources which must be color filtered. QD-LEDs can be fabricated on a silicon substrate, which allows them to be integrated onto standard silicon-based integrated circuits or microelectromechanical systems.
Quantum dot displays
Quantum dots are valued for displays because they emit light in very specific gaussian distributions. This can result in a display with visibly more accurate colors.
A conventional color liquid crystal display (LCD) is usually backlit by fluorescent lamps (CCFLs) or conventional white LEDs that are color filtered to produce red, green, and blue pixels. Quantum dot displays use blue-emitting LEDs rather than white LEDs as the light sources. The converting part of the emitted light is converted into pure green and red light by the corresponding color quantum dots placed in front of the blue LED or using a quantum dot infused diffuser sheet in the backlight optical stack. Blank pixels are also used to allow the blue LED light to still generate blue hues. This type of white light as the backlight of an LCD panel allows for the best color gamut at lower cost than an RGB LED combination using three LEDs.
Another method by which quantum dot displays can be achieved is the electroluminescent (EL) or electro-emissive method. This involves embedding quantum dots in each individual pixel. These are then activated and controlled via an electric current application. Since this is often light emitting itself, the achievable colors may be limited in this method. Electro-emissive QD-LED TVs exist in laboratories only.
The ability of QDs to precisely convert and tune a spectrum makes them attractive for LCD displays. Previous LCD displays can waste energy converting red-green poor, blue-yellow rich white light into a more balanced lighting. By using QDs, only the necessary colors for ideal images are contained in the screen. The result is a screen that is brighter, clearer, and more energy-efficient. The first commercial application of quantum dots was the Sony XBR X900A series of flat panel televisions released in 2013.
In June 2006, QD Vision announced technical success in making a proof-of-concept quantum dot display and show a bright emission in the visible and near infra-red region of the spectrum. A QD-LED integrated at a scanning microscopy tip was used to demonstrate fluorescence near-field scanning optical microscopy (NSOM) imaging.
Quantum dot photodetectors (QDPs) can be fabricated either via solution-processing, or from conventional single-crystalline semiconductors. Conventional single-crystalline semiconductor QDPs are precluded from integration with flexible organic electronics due to the incompatibility of their growth conditions with the process windows required by organic semiconductors. On the other hand, solution-processed QDPs can be readily integrated with an almost infinite variety of substrates, and also postprocessed atop other integrated circuits. Such colloidal QDPs have potential applications in surveillance, machine vision, industrial inspection, spectroscopy, and fluorescent biomedical imaging.
Quantum dots also function as photocatalysts for the light driven chemical conversion of water into hydrogen as a pathway to solar fuel. In photocatalysis, electron hole pairs formed in the dot under band gap excitation drive redox reactions in the surrounding liquid. Generally, the photocatalytic activity of the dots is related to the particle size and its degree of quantum confinement. This is because the band gap determines the chemical energy that is stored in the dot in the excited state. An obstacle for the use of quantum dots in photocatalysis is the presence of surfactants on the surface of the dots. These surfactants (or ligands) interfere with the chemical reactivity of the dots by slowing down mass transfer and electron transfer processes. Also, quantum dots made of metal chalcogenides are chemically unstable under oxidizing conditions and undergo photo corrosion reactions.
Quantum dots are theoretically described as a point like, or a zero dimensional (0D) entity. Most of their properties depend on the dimensions, shape and materials of which QDs are made. Generally QDs present different thermodynamic properties from the bulk materials of which they are made. One of these effects is the Melting-point depression. Optical properties of spherical metallic QDs are well described by the Mie scattering theory.
Quantum confinement in semiconductors
In a semiconductor crystallite whose size is smaller than twice the size of its exciton Bohr radius, the excitons are squeezed, leading to quantum confinement. The energy levels can then be predicted using the particle in a box model in which the energies of states depend on the length of the box. Comparing the quantum dots size to the Bohr radius of the electron and hole wave functions, 3 regimes can be defined. A 'strong confinement regime' is defined as the quantum dots radius being smaller than both electron and hole Bohr radius, 'weak confinement' is given when the quantum dot is larger than both. For semiconductors in which electron and hole radii are markedly different, an 'intermediate confinement regime' exists, where the quantum dot's radius is larger than the Bohr radius of one charge carrier (typically the hole), but not the other charge carrier.
- Band gap energy
- The band gap can become smaller in the strong confinement regime as the energy levels split up. The Exciton Bohr radius can be expressed as:
- where ab is the Bohr radius=0.053 nm, m is the mass, μ is the reduced mass, and εr is the size-dependent dielectric constant (Relative permittivity). This results in the increase in the total emission energy (the sum of the energy levels in the smaller band gaps in the strong confinement regime is larger than the energy levels in the band gaps of the original levels in the weak confinement regime) and the emission at various wavelengths. If the size distribution of QDs is not enough peaked, the convolution of multiple emission wavelengths is observed as a continuous spectra.
- Confinement energy
- The exciton entity can be modeled using the particle in the box. The electron and the hole can be seen as hydrogen in the Bohr model with the hydrogen nucleus replaced by the hole of positive charge and negative electron mass. Then the energy levels of the exciton can be represented as the solution to the particle in a box at the ground level (n = 1) with the mass replaced by the reduced mass. Thus by varying the size of the quantum dot, the confinement energy of the exciton can be controlled.
- Bound exciton energy
- There is Coulomb attraction between the negatively charged electron and the positively charged hole. The negative energy involved in the attraction is proportional to Rydberg's energy and inversely proportional to square of the size-dependent dielectric constant of the semiconductor. When the size of the semiconductor crystal is smaller than the Exciton Bohr radius, the Coulomb interaction must be modified to fit the situation.
Therefore, the sum of these energies can be represented as:
where μ is the reduced mass, a is the radius of the quantum dot, me is the free electron mass, mh is the hole mass, and εr is the size-dependent dielectric constant.
Although the above equations were derived using simplifying assumptions, they imply that the electronic transitions of the quantum dots will depend on their size. These quantum confinement effects are apparent only below the critical size. Larger particles do not exhibit this effect. This effect of quantum confinement on the quantum dots has been repeatedly verified experimentally and is a key feature of many emerging electronic structures.
The Coulomb interaction between confined carriers can also be studied by numerical means when results unconstrained by asymptotic approximations are pursued.
Besides confinement in all three dimensions (i.e., a quantum dot), other quantum confined semiconductors include:
- Quantum wires, which confine electrons or holes in two spatial dimensions and allow free propagation in the third.
- Quantum wells, which confine electrons or holes in one dimension and allow free propagation in two dimensions.
A variety of theoretical frameworks exist to model optical, electronic, and structural properties of quantum dots. These may be broadly divided into quantum mechanical, semiclassical, and classical.
Semiclassical models of quantum dots frequently incorporate a chemical potential. For example, the thermodynamic chemical potential of an N-particle system is given by
whose energy terms may be obtained as solutions of the Schrödinger equation. The definition of capacitance,
with the potential difference
may be applied to a quantum dot with the addition or removal of individual electrons,
- and .
Classical models of electrostatic properties of electrons in quantum dots are similar in nature to the Thomson problem of optimally distributing electrons on a unit sphere.
The classical electrostatic treatment of electrons confined to spherical quantum dots is similar to their treatment in the Thomson, or plum pudding model, of the atom.
The classical treatment of both two-dimensional and three-dimensional quantum dots exhibit electron shell-filling behavior. A "periodic table of classical artificial atoms" has been described for two-dimensional quantum dots. As well, several connections have been reported between the three-dimensional Thomson problem and electron shell-filling patterns found in naturally-occurring atoms found throughout the periodic table. This latter work originated in classical electrostatic modeling of electrons in a spherical quantum dot represented by an ideal dielectric sphere.
- Core–shell semiconductor nanocrystal
- Cadmium-free quantum dots
- Nanocrystal solar cell
- Quantum dot laser
- Quantum dot single-photon source
- Quantum point contact
- Trojan wave packet
- Langmuir-Blodgett film
- Alexey Ekimov
- Louis E. Brus
- Mark Reed (physicist)
- Shuming Nie
- Paul Alivisatos
- Moungi Bawendi
- Carbon quantum dots
- Ashoori, R. C. (1996). "Electrons in artificial atoms". Nature. 379 (6564): 413–419. Bibcode:1996Natur.379..413A. doi:10.1038/379413a0.
- Kastner, M. A. (1993). "Artificial Atoms". Physics Today. 46 (1): 24–31. Bibcode:1993PhT....46a..24K. doi:10.1063/1.881393.
- Murray, C. B.; Kagan, C. R.; Bawendi, M. G. (2000). "Synthesis and Characterization of Monodisperse Nanocrystals and Close-Packed Nanocrystal Assemblies". Annual Review of Materials Research. 30 (1): 545–610. Bibcode:2000AnRMS..30..545M. doi:10.1146/annurev.matsci.30.1.545.
- Brus, L.E. (2007). "Chemistry and Physics of Semiconductor Nanocrystals" (PDF). Retrieved 7 July 2009.
- "Quantum Dots". Nanosys – Quantum Dot Pioneers. Retrieved 4 December 2015.
- Huffaker, D. L.; Park, G.; Zou, Z.; Shchekin, O. B.; Deppe, D. G. (1998). "1.3 μm room-temperature GaAs-based quantum-dot laser". Applied Physics Letters. 73 (18): 2564–2566. doi:10.1063/1.122534. ISSN 0003-6951.
- Lodahl, Peter; Mahmoodian, Sahand; Stobbe, Søren (2015). "Interfacing single photons and single quantum dots with photonic nanostructures". Reviews of Modern Physics. 87 (2): 347–400. arXiv:1312.1079. doi:10.1103/RevModPhys.87.347. ISSN 0034-6861.
- Eisaman, M. D.; Fan, J.; Migdall, A.; Polyakov, S. V. (2011). "Invited Review Article: Single-photon sources and detectors". Review of Scientific Instruments. 82 (7): 071101. doi:10.1063/1.3610677. ISSN 0034-6748.
- Senellart, Pascale; Solomon, Glenn; White, Andrew (2017). "High-performance semiconductor quantum-dot single-photon sources". Nature Nanotechnology. 12 (11): 1026–1039. doi:10.1038/nnano.2017.218. ISSN 1748-3387.
- Loss, Daniel; DiVincenzo, David P. (1998). "Quantum computation with quantum dots". Physical Review A. 57 (1): 120–126. doi:10.1103/PhysRevA.57.120. ISSN 1050-2947.
- Ramírez, H. Y., Flórez J., and Camacho A. S. (2015). "Efficient control of coulomb enhanced second harmonic generation from excitonic transitions in quantum dot ensembles". Phys. Chem. Chem. Phys. 17 (37): 23938–46. Bibcode:2015PCCP...1723938R. doi:10.1039/C5CP03349G. PMID 26313884.CS1 maint: multiple names: authors list (link)
- Coe-Sullivan, S.; Steckel, J. S.; Woo, W.-K.; Bawendi, M. G.; Bulović, V. (1 July 2005). "Large-Area Ordered Quantum-Dot Monolayers via Phase Separation During Spin-Casting". Advanced Functional Materials. 15 (7): 1117–1124. doi:10.1002/adfm.200400468.
- Xu, Shicheng; Dadlani, Anup L.; Acharya, Shinjita; Schindler, Peter; Prinz, Fritz B. (2016). "Oscillatory barrier-assisted Langmuir–Blodgett deposition of large-scale quantum dot monolayers". Applied Surface Science. 367: 500–506. Bibcode:2016ApSS..367..500X. doi:10.1016/j.apsusc.2016.01.243.
- Gorbachev, I. A.; Goryacheva, I. Yu; Glukhovskoy, E. G. (1 June 2016). "Investigation of Multilayers Structures Based on the Langmuir-Blodgett Films of CdSe/ZnS Quantum Dots". BioNanoScience. 6 (2): 153–156. doi:10.1007/s12668-016-0194-0. ISSN 2191-1630.
- Achermann, Marc; Petruska, Melissa A.; Crooker, Scott A.; Klimov, Victor I. (1 December 2003). "Picosecond Energy Transfer in Quantum Dot Langmuir−Blodgett Nanoassemblies". The Journal of Physical Chemistry B. 107 (50): 13782–13787. arXiv:cond-mat/0310127. doi:10.1021/jp036497r. ISSN 1520-6106.
- Protesescu, Loredana (2015). "Nanocrystals of Cesium Lead Halide Perovskites (CsPbX3, X = Cl, Br, and I): Novel Optoelectronic Materials Showing Bright Emission with Wide Color Gamut Profiling". Nano Letters. 15 (6): 3692–3696. doi:10.1021/nl5048779. PMC 4462997. PMID 25633588.CS1 maint: display-authors (link)
- Mangolini, L.; Thimsen, E.; Kortshagen, U. (2005). "High-yield plasma synthesis of luminescent silicon nanocrystals". Nano Letters. 5 (4): 655–659. Bibcode:2005NanoL...5..655M. doi:10.1021/nl050066y. PMID 15826104.
- Knipping, J.; Wiggers, H.; Rellinghaus, B.; Roth, P.; Konjhodzic, D.; Meier, C. (2004). "Synthesis of high purity silicon nanoparticles in a low Pressure microwave reactor". Journal of Nanoscience and Technology. 4 (8): 1039–1044. doi:10.1166/jnn.2004.149. PMID 15656199.
- Sankaran, R. M.; Holunga, D.; Flagan, R. C.; Giapis, K. P. (2005). "Synthesis of blue luminescent Si nanoparticles using atmospheric-pressure microdischarges" (PDF). Nano Letters. 5 (3): 537–541. Bibcode:2005NanoL...5..537S. doi:10.1021/nl0480060. PMID 15755110.
- Kortshagen, U (2009). "Nonthermal plasma synthesis of semiconductor nanocrystals". J. Phys. D: Appl. Phys. 42 (11): 113001. Bibcode:2009JPhD...42k3001K. doi:10.1088/0022-3727/42/11/113001.
- Pi, X. D.; Kortshagen, U. (2009). "Nonthermal plasma synthesized freestanding silicon–germanium alloy nanocrystals". Nanotechnology. 20 (29): 295602. Bibcode:2009Nanot..20C5602P. doi:10.1088/0957-4484/20/29/295602. PMID 19567968.
- Pi, X. D.; Gresback, R.; Liptak, R. W.; Campbell, S. A.; Kortshagen, U. (2008). "Doping efficiency, dopant location, and oxidation of Si nanocrystals" (PDF). Applied Physics Letters. 92 (2): 123102. Bibcode:2008ApPhL..92b3102S. doi:10.1063/1.2830828.
- Ni, Z. Y.; Pi, X. D.; Ali, M.; Zhou, S.; Nozaki, T.; Yang, D. (2015). "Freestanding doped silicon nanocrystals synthesized by plasma". J. Phys. D: Appl. Phys. 48 (31): 314006. Bibcode:2015JPhD...48E4006N. doi:10.1088/0022-3727/48/31/314006.
- Pereira, R. N.; Almeida, A. J. (2015). "Doped semiconductor nanoparticles synthesized in gas-phase plasmas". J. Phys. D: Appl. Phys. 48 (31): 314005. Bibcode:2015JPhD...48E4005P. doi:10.1088/0022-3727/48/31/314005.
- Mangolini, L.; Kortshagen, U. (2007). "Plasma-assisted synthesis of silicon nanocrystal inks". Advanced Materials. 19 (18): 2513–2519. doi:10.1002/adma.200700595.
- Pi, X. D.; Yu, T.; Yang, D. (2014). "Water-dispersible silicon-quantum-dot-containing micelles self-assembled from an amphiphilic polymer". Part. Part. Syst. Charact. 31 (7): 751–756. doi:10.1002/ppsc.201300346.
- Clark, Pip; Radtke, Hanna; Pengpad, Atip; Williamson, Andrew; Spencer, Ben; Hardman, Samantha; Neo, Darren; Fairclough, Simon; et al. (2017). "The Passivating Effect of Cadmium in PbS / CdS Colloidal Quantum Dot Solar Cells Probed by nm-Scale Depth Profiling". Nanoscale. 9 (18): 6056–6067. doi:10.1039/c7nr00672a. PMID 28443889.
- Stranski, Ivan N.; Krastanow, Lubomir (1938). "Zur Theorie der orientierten Ausscheidung von Ionenkristallen aufeinander". Abhandlungen der Mathematisch-Naturwissenschaftlichen Klasse IIb. Akademie der Wissenschaften Wien. 146: 797–810.
- Leonard, D.; Pond, K.; Petroff, P. M. (1994). "Critical layer thickness for self-assembled InAs islands on GaAs". Physical Review B. 50 (16): 11687–11692. doi:10.1103/PhysRevB.50.11687. ISSN 0163-1829. PMID 9975303.
- Silbey, Robert J.; Alberty, Robert A.; Bawendi, Moungi G. (2005). Physical Chemistry, 4th ed. John Wiley &Sons. p. 835.
- Prati, Enrico; De Michielis, Marco; Belli, Matteo; Cocco, Simone; Fanciulli, Marco; Kotekar-Patil, Dharmraj; Ruoff, Matthias; Kern, Dieter P; et al. (2012). "Few electron limit of n-type metal oxide semiconductor single electron transistors". Nanotechnology. 23 (21): 215204. arXiv:1203.4811. Bibcode:2012Nanot..23u5204P. CiteSeerX 10.1.1.756.4383. doi:10.1088/0957-4484/23/21/215204. PMID 22552118.
- Lee SW, Mao C, Flynn CE, Belcher AM (2002). "Ordering of quantum dots using genetically engineered viruses". Science. 296 (5569): 892–5. Bibcode:2002Sci...296..892L. doi:10.1126/science.1068054. PMID 11988570.
- Whaley SR, English DS, Hu EL, Barbara PF, Belcher AM (2000). "Selection of peptides with semiconductor binding specificity for directed nanocrystal assembly". Nature. 405 (6787): 665–8. Bibcode:2000Natur.405..665W. doi:10.1038/35015043. PMID 10864319.
- Jawaid A.M.; Chattopadhyay S.; Wink D.J.; Page L.E.; Snee P.T. (2013). "A". ACS Nano. 7 (4): 3190–3197. doi:10.1021/nn305697q. PMID 23441602.
- Continuous Flow Synthesis Method for Fluorescent Quantum Dots. Azonano.com (2013-06-01). Retrieved on 2015-07-19.
- Quantum Materials Corporation and the Access2Flow Consortium (2011). "Quantum materials corp achieves milestone in High Volume Production of Quantum Dots". Retrieved 7 July 2011.
- "Nanoco and Dow tune in for sharpest picture yet". The Times. 25 September 2014. Retrieved 9 May 2015.
- MFTTech (24 March 2015). "LG Electronics Partners with Dow to Commercialize LGs New Ultra HD TV with Quantum Dot Technology". Retrieved 9 May 2015.
- Hauser, Charlotte A. E.; Zhang, Shuguang (2010). "Peptides as biological semiconductors". Nature. 468 (7323): 516–517. Bibcode:2010Natur.468..516H. doi:10.1038/468516a. PMID 21107418.
- Hardman, R. (2006). "A Toxicologic Review of Quantum Dots: Toxicity Depends on Physicochemical and Environmental Factors". Environmental Health Perspectives. 114 (2): 165–72. doi:10.1289/ehp.8284. PMC 1367826. PMID 16451849.
- Pelley, J. L.; Daar, A. S.; Saner, M. A. (2009). "State of Academic Knowledge on Toxicity and Biological Fate of Quantum Dots". Toxicological Sciences. 112 (2): 276–296. doi:10.1093/toxsci/kfp188. PMC 2777075. PMID 19684286.
- Tsoi, Kim M.; Dai, Qin; Alman, Benjamin A.; Chan, Warren C. W. (19 March 2013). "Are Quantum Dots Toxic? Exploring the Discrepancy Between Cell Culture and Animal Studies". Accounts of Chemical Research. 46 (3): 662–671. doi:10.1021/ar300040z. PMID 22853558.
- Derfus, Austin M.; Chan, Warren C. W.; Bhatia, Sangeeta N. (1 January 2004). "Probing the Cytotoxicity of Semiconductor Quantum Dots". Nano Letters. 4 (1): 11–18. Bibcode:2004NanoL...4...11D. doi:10.1021/nl0347334. PMC 5588688. PMID 28890669.
- Liu, Wei; Zhang, Shuping; Wang, Lixin; Qu, Chen; Zhang, Changwen; Hong, Lei; Yuan, Lin; Huang, Zehao; Wang, Zhe (29 September 2011). "CdSe Quantum Dot (QD)-Induced Morphological and Functional Impairments to Liver in Mice". PLoS ONE. 6 (9): e24406. Bibcode:2011PLoSO...624406L. doi:10.1371/journal.pone.0024406. PMC 3182941. PMID 21980346.
- Parak, W.j.; Boudreau, R.; Le Gros, M.; Gerion, D.; Zanchet, D.; Micheel, C.m.; Williams, S.c.; Alivisatos, A.p.; Larabell, C. (18 June 2002). "Cell Motility and Metastatic Potential Studies Based on Quantum Dot Imaging of Phagokinetic Tracks". Advanced Materials (Submitted manuscript). 14 (12): 882–885. doi:10.1002/1521-4095(20020618)14:12<882::AID-ADMA882>3.0.CO;2-Y.
- Green, Mark; Howman, Emily (2005). "Semiconductor quantum dots and free radical induced DNA nicking". Chemical Communications (1): 121–3. doi:10.1039/b413175d. PMID 15614393.
- Hauck, T. S.; Anderson, R. E.; Fischer, H. C.; Newbigging, S.; Chan, W. C. W. (2010). "In vivo Quantum-Dot Toxicity Assessment". Small. 6 (1): 138–44. doi:10.1002/smll.200900626. PMID 19743433.
- Soo Choi, Hak; Liu, Wenhao; Misra, Preeti; Tanaka, Eiichi; Zimmer, John P.; Itty Ipe, Binil; Bawendi, Moungi G.; Frangioni, John V. (1 October 2007). "Renal clearance of quantum dots". Nature Biotechnology. 25 (10): 1165–1170. doi:10.1038/nbt1340. PMC 2702539. PMID 17891134.
- Fischer, Hans C.; Hauck, Tanya S.; Gómez-Aristizábal, Alejandro; Chan, Warren C. W. (18 June 2010). "Exploring Primary Liver Macrophages for Studying Quantum Dot Interactions with Biological Systems". Advanced Materials. 22 (23): 2520–2524. doi:10.1002/adma.200904231. PMID 20491094.
- Van Driel; A. F. (2005). "Frequency-Dependent Spontaneous Emission Rate from CdSe and CdTe Nanocrystals: Influence of Dark States" (PDF). Physical Review Letters. 95 (23): 236804. arXiv:cond-mat/0509565. Bibcode:2005PhRvL..95w6804V. doi:10.1103/PhysRevLett.95.236804. PMID 16384329.
- Leatherdale, C. A.; Woo, W. -K.; Mikulec, F. V.; Bawendi, M. G. (2002). "On the Absorption Cross Section of CdSe Nanocrystal Quantum Dots". The Journal of Physical Chemistry B. 106 (31): 7619–7622. doi:10.1021/jp025698c.
- D. Loss and D. P. DiVincenzo, "Quantum computation with quantum dots", Phys. Rev. A 57, p120 (1998); on arXiv.org in Jan. 1997
- Yazdani, Sajad; Pettes, Michael Thompson (26 October 2018). "Nanoscale self-assembly of thermoelectric materials: a review of chemistry-based approaches". Nanotechnology. 29 (43): 432001. doi:10.1088/1361-6528/aad673. ISSN 0957-4484. PMID 30052199.
- Bux, Sabah K.; Fleurial, Jean-Pierre; Kaner, Richard B. (2010). "Nanostructured materials for thermoelectric applications". Chemical Communications. 46 (44): 8311–24. doi:10.1039/c0cc02627a. ISSN 1359-7345. PMID 20922257.
- Zhao, Yixin; Dyck, Jeffrey S.; Burda, Clemens (2011). "Toward high-performance nanostructured thermoelectric materials: the progress of bottom-up solution chemistry approaches". Journal of Materials Chemistry. 21 (43): 17049. doi:10.1039/c1jm11727k. ISSN 0959-9428.
- Achermann, M.; Petruska, M. A.; Smith, D. L.; Koleske, D. D.; Klimov, V. I. (2004). "Energy-transfer pumping of semiconductor nanocrystals using an epitaxial quantum well". Nature. 429 (6992): 642–646. Bibcode:2004Natur.429..642A. doi:10.1038/nature02571. PMID 15190347.
- Mongin C.; Garakyaraghi S.; Razgoniaeva N.; Zamkov M.; Castellano F.N. (2016). "Direct observation of triplet energy transfer from semiconductor nanocrystals". Science. 351 (6271): 369–372. Bibcode:2016Sci...351..369M. doi:10.1126/science.aad6378. PMID 26798011.
- Walling, M. A.; Novak, Shepard (February 2009). "Quantum Dots for Live Cell and In Vivo Imaging". Int. J. Mol. Sci. 10 (2): 441–491. doi:10.3390/ijms10020441. PMC 2660663. PMID 19333416.
- Michalet, X.; Pinaud, F. F.; Bentolila, L. A.; Tsay, J. M.; Doose, S.; Li, J. J.; Sundaresan, G.; Wu, A. M.; Gambhir, S. S.; Weiss, S. (2005). "Quantum Dots for Live Cells, in Vivo Imaging, and Diagnostics". Science. 307 (5709): 538–44. Bibcode:2005Sci...307..538M. doi:10.1126/science.1104274. PMC 1201471. PMID 15681376.
- Juan Carlos Stockert, Alfonso Blázquez-Castro (2017). "Chapter 18 Luminescent Solid-State Markers". Fluorescence Microscopy in Life Sciences. Bentham Science Publishers. pp. 606–641. ISBN 978-1-68108-519-7. Retrieved 24 December 2017.
- Marchuk, K.; Guo, Y.; Sun, W.; Vela, J.; Fang, N. (2012). "High-Precision Tracking with Non-blinking Quantum Dots Resolves Nanoscale Vertical Displacement". Journal of the American Chemical Society. 134 (14): 6108–11. doi:10.1021/ja301332t. PMID 22458433.
- Lane, L. A.; Smith, A. M.; Lian, T.; Nie, S. (2014). "Compact and Blinking-Suppressed Quantum Dots for Single-Particle Tracking in Live Cells". The Journal of Physical Chemistry B. 118 (49): 14140–7. doi:10.1021/jp5064325. PMC 4266335. PMID 25157589.
- Spie (2014). "Paul Selvin Hot Topics presentation: New Small Quantum Dots for Neuroscience". SPIE Newsroom. doi:10.1117/2.3201403.17.
- Tokumasu, F; Fairhurst, Rm; Ostera, Gr; Brittain, Nj; Hwang, J; Wellems, Te; Dvorak, Ja (2005). "Band 3 modifications in Plasmodium falciparum-infected AA and CC erythrocytes assayed by autocorrelation analysis using quantum dots". Journal of Cell Science (Free full text). 118 (Pt 5): 1091–8. doi:10.1242/jcs.01662. PMID 15731014.
- Dahan, M. (2003). "Diffusion Dynamics of Glycine Receptors Revealed by Single-Quantum Dot Tracking". Science. 302 (5644): 442–5. Bibcode:2003Sci...302..442D. doi:10.1126/science.1088525. PMID 14564008.
- Howarth, M.; Liu, W.; Puthenveetil, S.; Zheng, Y.; Marshall, L. F.; Schmidt, M. M.; Wittrup, K. D.; Bawendi, M. G.; Ting, A. Y. (2008). "Monovalent, reduced-size quantum dots for imaging receptors on living cells". Nature Methods. 5 (5): 397–9. doi:10.1038/nmeth.1206. PMC 2637151. PMID 18425138.
- Akerman, M. E.; Chan, W. C. W.; Laakkonen, P.; Bhatia, S. N.; Ruoslahti, E. (2002). "Nanocrystal targeting in vivo". Proceedings of the National Academy of Sciences. 99 (20): 12617–21. Bibcode:2002PNAS...9912617A. doi:10.1073/pnas.152463399. PMC 130509. PMID 12235356.
- Farlow, J.; Seo, D.; Broaders, K. E.; Taylor, M. J.; Gartner, Z. J.; Jun, Y. W. (2013). "Formation of targeted monovalent quantum dots by steric exclusion". Nature Methods. 10 (12): 1203–5. doi:10.1038/nmeth.2682. PMC 3968776. PMID 24122039.
- Dwarakanath, S.; Bruno, J. G.; Shastry, A.; Phillips, T.; John, A.; Kumar, A.; Stephenson, L. D. (2004). "Quantum dot-antibody and aptamer conjugates shift fluorescence upon binding bacteria". Biochemical and Biophysical Research Communications. 325 (3): 739–43. doi:10.1016/j.bbrc.2004.10.099. PMID 15541352.
- Zherebetskyy D.; Scheele M.; Zhang Y.; Bronstein N.; Thompson C.; Britt D.; Salmeron M.; Alivisatos P.; Wang L.W. (2014). "Hydroxylation of the surface of PbS nanocrystals passivated with oleic acid". Science (Submitted manuscript). 344 (6190): 1380–1384. Bibcode:2014Sci...344.1380Z. doi:10.1126/science.1252727. PMID 24876347.
- Ballou, B.; Lagerholm, B. C.; Ernst, L. A.; Bruchez, M. P.; Waggoner, A. S. (2004). "Noninvasive Imaging of Quantum Dots in Mice". Bioconjugate Chemistry. 15 (1): 79–86. doi:10.1021/bc034153y. PMID 14733586.
- Lu, Zhisong; Li, Chang Ming; Bao, Haifeng; Qiao, Yan; Toh, Yinghui; Yang, Xu (20 May 2008). "Mechanism of antimicrobial activity of CdTe quantum dots". Langmuir: The ACS Journal of Surfaces and Colloids. 24 (10): 5445–5452. doi:10.1021/la704075r. ISSN 0743-7463. PMID 18419147.
- Abdolmohammadi, Mohammad Hossein; Fallahian, Faranak; Fakhroueian, Zahra; Kamalian, Mozhgan; Keyhanvar, Peyman; M Harsini, Faraz; Shafiekhani, Azizollah (December 2017). "Application of new ZnO nanoformulation and Ag/Fe/ZnO nanocomposites as water-based nanofluids to consider in vitro cytotoxic effects against MCF-7 breast cancer cells". Artificial Cells, Nanomedicine, and Biotechnology. 45 (8): 1769–1777. doi:10.1080/21691401.2017.1290643. ISSN 2169-141X. PMID 28278581.
- Resch-Genger, Ute; Grabolle, Markus; Cavaliere-Jaricot, Sara; Nitschke, Roland; Nann, Thomas (28 August 2008). "Quantum dots versus organic dyes as fluorescent labels". Nature Methods. 5 (9): 763–775. doi:10.1038/nmeth.1248. PMID 18756197.
- Algar, W. Russ; Krull, Ulrich J. (7 November 2007). "Quantum dots as donors in fluorescence resonance energy transfer for the bioanalysis of nucleic acids, proteins, and other biological molecules". Analytical and Bioanalytical Chemistry. 391 (5): 1609–1618. doi:10.1007/s00216-007-1703-3. PMID 17987281.
- Beane, Gary; Boldt, Klaus; Kirkwood, Nicholas; Mulvaney, Paul (7 August 2014). "Energy Transfer between Quantum Dots and Conjugated Dye Molecules". The Journal of Physical Chemistry C. 118 (31): 18079–18086. doi:10.1021/jp502033d.
- Pelley, J. L.; Daar, A. S.; Saner, M. A. (2009). "State of Academic Knowledge on Toxicity and Biological Fate of Quantum Dots". Toxicological Sciences. 112 (2): 276–96. doi:10.1093/toxsci/kfp188. PMC 2777075. PMID 19684286.
- Soo Choi, H.; Liu, W.; Misra, P.; Tanaka, E.; Zimmer, J. P.; Itty Ipe, B.; Bawendi, M. G.; Frangioni, J. V. (2007). "Renal clearance of quantum dots". Nature Biotechnology. 25 (10): 1165–70. doi:10.1038/nbt1340. PMC 2702539. PMID 17891134.
- Sharei, A.; Zoldan, J.; Adamo, A.; Sim, W. Y.; Cho, N.; Jackson, E.; Mao, S.; Schneider, S.; Han, M. -J.; Lytton-Jean, A.; Basto, P. A.; Jhunjhunwala, S.; Lee, J.; Heller, D. A.; Kang, J. W.; Hartoularos, G. C.; Kim, K. -S.; Anderson, D. G.; Langer, R.; Jensen, K. F. (2013). "A vector-free microfluidic platform for intracellular delivery". Proceedings of the National Academy of Sciences. 110 (6): 2082–7. Bibcode:2013PNAS..110.2082S. doi:10.1073/pnas.1218705110. PMC 3568376. PMID 23341631.
- Schaller, R.; Klimov, V. (2004). "High Efficiency Carrier Multiplication in PbSe Nanocrystals: Implications for Solar Energy Conversion". Physical Review Letters. 92 (18): 186601. arXiv:cond-mat/0404368. Bibcode:2004PhRvL..92r6601S. doi:10.1103/PhysRevLett.92.186601. PMID 15169518.
- Kim, Gi-Hwan; Arquer, F. Pelayo García de; Yoon, Yung Jin; Lan, Xinzheng; Liu, Mengxia; Voznyy, Oleksandr; Yang, Zhenyu; Fan, Fengjia; Ip, Alexander H. (2 November 2015). "High-Efficiency Colloidal Quantum Dot Photovoltaics via Robust Self-Assembled Monolayers". Nano Letters. 15 (11): 7691–7696. Bibcode:2015NanoL..15.7691K. doi:10.1021/acs.nanolett.5b03677. PMID 26509283.
- Krebs, Frederik C.; Tromholt, Thomas; Jørgensen, Mikkel (2010). "Upscaling of polymer solar cell fabrication using full roll-to-roll processing". Nanoscale. 2 (6): 873–86. Bibcode:2010Nanos...2..873K. doi:10.1039/b9nr00430k. PMID 20648282.
- Park, Kwang-Tae; Kim, Han-Jung; Park, Min-Joon; Jeong, Jun-Ho; Lee, Jihye; Choi, Dae-Geun; Lee, Jung-Ho; Choi, Jun-Hyuk (15 July 2015). "13.2% efficiency Si nanowire/PEDOT:PSS hybrid solar cell using a transfer-imprinted Au mesh electrode". Scientific Reports. 5: 12093. Bibcode:2015NatSR...512093P. doi:10.1038/srep12093. PMC 4502511. PMID 26174964.
- Leschkies, Kurtis S.; Divakar, Ramachandran; Basu, Joysurya; Enache-Pommer, Emil; Boercker, Janice E.; Carter, C. Barry; Kortshagen, Uwe R.; Norris, David J.; Aydil, Eray S. (1 June 2007). "Photosensitization of ZnO Nanowires with CdSe Quantum Dots for Photovoltaic Devices". Nano Letters. 7 (6): 1793–1798. Bibcode:2007NanoL...7.1793L. doi:10.1021/nl070430o. PMID 17503867.
- Xie, Chao; Nie, Biao; Zeng, Longhui; Liang, Feng-Xia; Wang, Ming-Zheng; Luo, Linbao; Feng, Mei; Yu, Yongqiang; Wu, Chun-Yan (22 April 2014). "Core–Shell Heterojunction of Silicon Nanowire Arrays and Carbon Quantum Dots for Photovoltaic Devices and Self-Driven Photodetectors". ACS Nano. 8 (4): 4015–4022. doi:10.1021/nn501001j. PMID 24665986.
- Gupta, Vinay; Chaudhary, Neeraj; Srivastava, Ritu; Sharma, Gauri Datt; Bhardwaj, Ramil; Chand, Suresh (6 July 2011). "Luminscent Graphene Quantum Dots for Organic Photovoltaic Devices". Journal of the American Chemical Society. 133 (26): 9960–9963. doi:10.1021/ja2036749. PMID 21650464.
- "Nano LEDs printed on silicon". nanotechweb.org. 3 July 2009. Archived from the original on 26 September 2017.
- "Quantum Dots: Solution for a Wider Color Gamut". pid.samsungdisplay.com. Retrieved 1 November 2018.
- "A Guide to the Evolution of Quantum Dot Displays". pid.samsungdisplay.com. Retrieved 1 November 2018.
- "Quantum dot white and colored light emitting diodes". patents.google.com. Retrieved 1 November 2018.
- Bullis, Kevin. (2013-01-11) Quantum Dots Produce More Colorful Sony TVs | MIT Technology Review. Technologyreview.com. Retrieved on 2015-07-19.
- Hoshino, Kazunori; Gopal, Ashwini; Glaz, Micah S.; Vanden Bout, David A.; Zhang, Xiaojing (2012). "Nanoscale fluorescence imaging with quantum dot near-field electroluminescence". Applied Physics Letters. 101 (4): 043118. Bibcode:2012ApPhL.101d3118H. doi:10.1063/1.4739235.
- Konstantatos, G.; Sargent, E. H. (2009). "Solution-Processed Quantum Dot Photodetectors". Proceedings of the IEEE. 97 (10): 1666–1683. doi:10.1109/JPROC.2009.2025612.
- Vaillancourt, J.; Lu, X.-J.; Lu, Xuejun (2011). "A High Operating Temperature (HOT) Middle Wave Infrared (MWIR) Quantum-Dot Photodetector". Optics and Photonics Letters. 4 (2): 1–5. doi:10.1142/S1793528811000196.
- Zhao, Jing; Holmes, Michael A.; Osterloh, Frank E. (2013). "Quantum Confinement Controls Photocatalysis: A Free Energy Analysis for Photocatalytic Proton Reduction at Cd Se Nanocrystals". ACS Nano. 7 (5): 4316–25. doi:10.1021/nn400826h. PMID 23590186.
- Ramírez, H. Y., Lin C. H., Chao, C. C., Hsu, Y., You, W. T., Huang, S. Y., Chen, Y. T., Tseng, H. C., Chang, W. H., Lin, S. D., and Cheng, S. J. (2010). "Optical fine structures of highly quantized InGaAs/GaAs self-assembled quantum dots". Phys. Rev. B. 81 (3): 245324. Bibcode:2010PhRvB..81x5324R. doi:10.1103/PhysRevB.81.245324.CS1 maint: multiple names: authors list (link)
- Brandrup, J.; Immergut, E.H. (1966). Polymer Handbook (2 ed.). New York: Wiley. pp. 240–246.
- Khare, Ankur, Wills, Andrew W., Ammerman, Lauren M., Noris, David J., and Aydil, Eray S. (2011). "Size control and quantum confinement in Cu2ZnSnX4 nanocrystals". Chem. Commun. 47 (42): 11721–3. doi:10.1039/C1CC14687D. PMID 21952415.CS1 maint: multiple names: authors list (link)
- Greenemeier, L. (5 February 2008). "New Electronics Promise Wireless at Warp Speed". Scientific American.
- Ramírez, H. Y. & Santana, A. (2012). "Two interacting electrons confined in a 3D parabolic cylindrically symmetric potential, in presence of axial magnetic field: A finite element approach". Comp. Phys. Comm. 183 (8): 1654. Bibcode:2012CoPhC.183.1654R. doi:10.1016/j.cpc.2012.03.002.
- Zumbühl DM, Miller JB, Marcus CM, Campman K, Gossard AC (2002). "Spin-orbit coupling, antilocalization, and parallel magnetic fields in quantum dots". Phys. Rev. Lett. 89 (27): 276803. arXiv:cond-mat/0208436. Bibcode:2002PhRvL..89A6803Z. doi:10.1103/PhysRevLett.89.276803. PMID 12513231.
- Iafrate, G. J.; Hess, K.; Krieger, J. B.; Macucci, M. (1995). "Capacitive nature of atomic-sized structures". Phys. Rev. B. 52 (15): 10737–10739. Bibcode:1995PhRvB..5210737I. doi:10.1103/physrevb.52.10737.
- Thomson, J.J. (1904). "On the Structure of the Atom: an Investigation of the Stability and Periods of Oscillation of a number of Corpuscles arranged at equal intervals around the Circumference of a Circle; with Application of the Results to the Theory of Atomic Structure" (extract of paper). Philosophical Magazine. Series 6. 7 (39): 237–265. doi:10.1080/14786440409463107.
- Bednarek, S.; Szafran, B. & Adamowski, J. (1999). "Many-electron artificial atoms". Phys. Rev. B. 59 (20): 13036–13042. Bibcode:1999PhRvB..5913036B. doi:10.1103/PhysRevB.59.13036.
- Bedanov, V. M. & Peeters, F. M. (1994). "Ordering and phase transitions of charged particles in a classical finite two-dimensional system". Physical Review B. 49 (4): 2667–2676. Bibcode:1994PhRvB..49.2667B. doi:10.1103/PhysRevB.49.2667.
- LaFave, T. Jr. (2013). "Correspondences between the classical electrostatic Thomson Problem and atomic electronic structure". Journal of Electrostatics. 71 (6): 1029–1035. arXiv:1403.2591. doi:10.1016/j.elstat.2013.10.001.
- LaFave, T. Jr. (2013). "The discrete charge dielectric model of electrostatic energy". Journal of Electrostatics. 69 (5): 414–418. arXiv:1403.2591. doi:10.1016/j.elstat.2013.10.001.
- Reed, M. A.; Bate, R. T.; Bradshaw, K.; Duncan, W. M.; Frensley, W. R.; Lee, J. W.; Shih, H. D. (1 January 1986). "Spatial quantization in GaAs–AlGaAs multiple quantum dots". Journal of Vacuum Science & Technology B: Microelectronics Processing and Phenomena. 4 (1): 358–360. Bibcode:1986JVSTB...4..358R. doi:10.1116/1.583331. ISSN 0734-211X.
- Kolobkova, E. V.; Nikonorov, N. V.; Aseev, V. A. (2012). "Optical Technologies Silver Nanoclusters Influence on Formation of Quantum Dots in Fluorine Phosphate Glasses". Scientific and Technical Journal of Information Technologies, Mechanics and Optics. 5 (12).
- Екимов АИ; Онущенко АА (1981). "Квантовый размерный эффект в трехмерных микрокристаллах полупроводников" (PDF). Письма в ЖЭТФ. 34: 363–366.
- Ekimov AI, Onushchenko AA (1982). "Quantum size effect in the optical-spectra of semiconductor micro-crystals". Soviet Physics Semiconductors-USSR. 16 (7): 775–778.
- Ekimov AI, Efros AL, Onushchenko AA (1985). "Quantum size effect in semiconductor microcrystals". Solid State Communications. 56 (11): 921–924. Bibcode:1985SSCom..56..921E. doi:10.1016/S0038-1098(85)80025-9.
- "Nanotechnology Timeline". National Nanotechnology Initiative.
- Rossetti, R.; Nakahara, S.; Brus, L. E. (15 July 1983). "Quantum size effects in the redox potentials, resonance Raman spectra, and electronic spectra of CdS crystallites in aqueous solution". The Journal of Chemical Physics. 79 (2): 1086–1088. Bibcode:1983JChPh..79.1086R. doi:10.1063/1.445834. ISSN 0021-9606.
- Brus, L. E. (1 May 1984). "Electron–electron and electron‐hole interactions in small semiconductor crystallites: The size dependence of the lowest excited electronic state". The Journal of Chemical Physics. 80 (9): 4403–4409. Bibcode:1984JChPh..80.4403B. doi:10.1063/1.447218. ISSN 0021-9606.
- Norris, D.J. (1995). "Measurement and Assignment of the Size-Dependent Optical Spectrum in Cadmium Selenide (CdSe) Quantum Dots, PhD thesis, MIT". hdl:1721.1/11129.
- Delerue, C. & Lannoo, M. (2004). Nanostructures: Theory and Modelling. Springer. p. 47. ISBN 978-3-540-20694-1.
- Quantum Dots: Technical Status and Market Prospects
- Quantum dots that produce white light could be the light bulb's successor
- Single quantum dots optical properties
- Quantum dot on arxiv.org
- Quantum Dots Research and Technical Data
- Simulation and interactive visualization of Quantum Dots wave function