Postal Index Number
The PIN system was introduced on 15 August 1972 by Shriram Bhikaji Velankar, an additional secretary in the Union Ministry of Communications. The system was introduced to simplify the manual sorting and delivery of mail by eliminating confusion over incorrect addresses, similar place names, and different languages used by the public.
The first digit of a PIN indicates the zone, the second indicates the sub-zone, and the third, combined with the first two, indicates the sorting district within that zone. The final three digits are assigned to individual post offices within the sorting district.
There are nine postal zones in India, including eight regional zones and one functional zone (for the Indian Army). The first digit of a PIN indicates the zone and is allocated over the 9 zones as follows:
|1st digit of PIN||Zone|
|1||Delhi, Haryana, Punjab, Himachal Pradesh, Jammu and Kashmir, Chandigarh|
|2||Uttar Pradesh, Uttarakhand|
|3||Rajasthan, Gujarat, Daman and Diu, Dadra and Nagar Haveli|
|4||Maharashtra, Goa, Madhya Pradesh, Chhattisgarh|
|5||Telangana, Andhra Pradesh, Karnataka|
|6||Tamil Nadu, Kerala, Puducherry, Lakshadweep|
|7||West Bengal, Odisha, Arunachal Pradesh, Nagaland, Manipur, Mizoram, Tripura, Meghalaya, Andaman and Nicobar Islands, Assam, Sikkim|
|9||Army Post Office (APO), Field Post Office (FPO)|
. 631 209 TRT PIN
The third digit of a PIN, combined with the first two digits, represents a specific geographical region (except in the case of the functional zone for the Army) called a sorting district that is headquartered at the main post office of the largest city in the region and is known as the sorting office. A state may have one or more sorting districts depending on the volume of mail handled.
|PIN prefix||ISO 3166-2:IN||Region|
|18–19||JK||Jammu and Kashmir|
|20–28||UP, UT||Uttar Pradesh, Uttarakhand|
|396210||DD||Daman and Diu|
|396||DN||Dadra and Nagar Haveli|
|744||AN||Andaman and Nicobar Islands|
|80–85||BR, JH||Bihar, Jharkhand|
|90–99||APS||Army Postal Service|
The last two digits represent the delivery office within the sorting district starting from 01 which would be the General Post Office (GPO) or head office (HO). The numbering of the delivery office is done chronologically with higher numbers assigned to newer delivery offices. If the volume of mail handled at a delivery office is too large, a new delivery office is created and the next available PIN is assigned. Thus, two delivery offices situated next to each other will only have the first four digits in common.
Each PIN is mapped to exactly one delivery post office which receives all the mail to be delivered to one or more lower offices within its jurisdiction, all of which share the same code. The delivery office can either be a General Post Office (GPO), a head office (HO), or a sub-office (SO) which are usually located in urban areas. The post from the delivery office is sorted and routed to other delivery offices for a different PIN or to one of the relevant sub-offices or branch offices for the same PIN. Branch offices (BOs) are located in rural areas and have limited postal services.
- Sometimes incorrectly written as "Pin code", "Pincode", "PINcode", or "pincode".
- India. Publications Division, Ministry of Information and Broadcasting, Government of India. 1974. p. 305. Retrieved 17 May 2013.
- "Mails section". Indian government postal department. Retrieved 17 May 2013.
- "Using pincode, maps to trace address". timesofindia.com. Archived from the original on 5 October 2016.
- "Tamilnadu Postal Circle – Pincode". tamilnadupost.nic.in. Archived from the original on 20 July 2014.
- "Archived copy" (PDF). Archived (PDF) from the original on 14 August 2014. Retrieved 14 August 2014.CS1 maint: archived copy as title (link)
- "Archived copy" (PDF). Archived (PDF) from the original on 30 May 2014. Retrieved 14 August 2014.CS1 maint: archived copy as title (link)