The paraw (Philippine Spanish: parao) is a general term for double outrigger sail boats native to the Visayas region of the Philippines. The paraw is similar to a proa, but the paraw has two outriggers or katig. They characteristically have large crab-claw sails opposite a smaller triangular foresail.
The word paraw (also spelled parao) is a cognate of the terms proa of the Pacific Islands, perahu of Malaysia, and prau of Indonesia. It is a generic term in the Visayas Islands to refer to outrigger boats propelled by sails (layag). It is a type of bangka, the wider term used for boats (with or without outriggers) in the Philippines.
The paraw has three major elements that make it a paraw: the bangka (canoe), the katig (outriggers), and the layag (sails). Motorized versions of bangkas (with outriggers) are commonly known as pump boats and are used for inter-island travel.
Paraws can sail between 11 and 17 knots (20~31 km/h). The outriggers (ama), or katig, are made of wood or bamboo, and may be straight or curved upward much like skis.
Traditionally these boats have been made from dungon, guisoc, ipil, duca, baslayan, obacya, bayog, Philippine mahogany (lawaan), basa and molave. Modern versions use plywood. The ropes of the boats are traditionally made from abaca (Manila hemp), but are now often synthetic rope.
The boat or canoe without outriggers is called a bangka (vanca) or baroto (also baloto) and may be dug out from solid tree trunk or made of planks secured with wooden nails. People familiar with terminology relating to the proa may recognize this as the vaka. The boat itself may be classified by passenger capacity as isahan ("for one [person]") or duwahan ("for two [persons]"), but the paraw usually has capacity for more than two people, leading to its use in ferrying small groups of passengers and goods between islands. The narrow cross-section of the boat made it sleek, cutting across water without a lot of drag.
The two katig or outriggers usually made from bamboo or various kinds of wood and served as counterpoise so that the boat would not easily overturn. They are attached to the boat via tarik (akas). The presence of the outriggers negates the need for a heavy keel and therefore reduces the overall weight of the paraw without sacrificing stability.
The layag or main sail may be made of anything from woven mats, cloth, canvas even sack cloth. Traditionally the main sail is similar to a lateen rig or a crabclaw sail and is attached to a vertical and horizontal spar, the sail differs from a traditional lateen rig in that the vertical spar is parallel to the mast and does not suffer from bad tack. The sail's spar may be as long as the mast, unattached and may appear to be longer than the mast when attached to it. There are no guidelines as to how the main sail is shaped but it may approximate an equilateral triangle. The paraw is also equipped with a foresail or jib and adds to the overall surface area and generated thrust derived from the wind. A variation of the paraw with rectangular sails is the vinta.
The mast, commonly made of bamboo, is secured by lines attached to, among other things, the outriggers, the fore (and sometimes, the aft) and various parts of the boat. Historically, the mast of smaller paraws was a spear or bangkaw and was a useful part of the ship when conducting raids against other seaside villages.
In November 2012, a team led by the artisan Gener Paduga, along with the Tao Philippines organization, started building a full-sized paraw sailboat in Palawan. Paduca originally envisioned the project while crewing a sailing yacht from Palawan to Africa. After having witnessed the thriving native sailing traditions in the Indian Ocean, he decided to revive the almost extinct native boat-building and sailing traditions of the Philippines. Sailing ships, which were once used throughout the islands, were in steep decline after engines became widely available in the 1970s.
The team consisted of several traditional boat carpenters from the islands of Cagayancillo and Romblon. The boat was constructed entirely using native techniques and also featured intricate designs by two master carvers of the native Palaw'an people. The boat was completed in March 2014 and was officially named the Balatik, after a traditional Filipino constellation (equivalent to Orion) named after a hunter's trapping device. It is 74 ft (23 m) long and 9 ft (2.7 m) at the widest point of the hull. It has two masts with four sails and could be crewed by three or four people. The boat is currently used both for tourism and for educational and social welfare projects of the Tao Kalahi Foundation in Palawan.
Paraw sailing Boracay Island
Before Boracay Island became a tourist resort, paraws were used for fishing and transportation of people as well as goods. Paraw sailing these days is a major tourist attraction. Local sailors offer their paraws for Island hopping and sunset sailing for a fairly small renting fee.
- "Palawan Paraw: A Blog Documenting the Construction and Voyages of a Traditional Filipino Sailboat". Wordpress. Retrieved 5 December 2018.
- Diamond, Isabel (23 October 2014). "Philippines: Reviving the lost art of sailing in Palawan". The Telegraph. Retrieved 5 December 2018.
- "Palawan by Paraw Boat". Travel+Leisure. Retrieved 5 December 2018.
- "Palawan Paraw: Reviving a Relic of Filipino Culture" (PDF). Wordpress. Retrieved 5 December 2018.
- "A Perspective of the Paraw". Iloilo Paraw Regatta. Iloilo Paraw Regatta Foundation. 2009-06-09. Retrieved 2009-06-09.
- Henry F. Funtecha, Ph.D. (February 27, 2009). "Baroto, paraw, batil, barangay, etc: Panay's maritime legacy". The News Today. The News Today. Retrieved May 21, 2010.
- Ernesto J. Laput. "Mga Barko ng Ninuno" [The Ships of (our) Ancestors]. PINAS: Munting Kasaysayan ng Pira-Pirasong Bayan (in Tagalog). elaput.org. Retrieved May 13, 2010.
|Wikimedia Commons has media related to Paraw.|