# Paraboloid

In geometry, a **paraboloid** is a quadric surface that has exactly one axis of symmetry and no center of symmetry. The term "paraboloid" is derived from parabola, which refers to a conic section that has a similar property of symmetry.

Every plane section of a paraboloid by a plane parallel to the axis of symmetry is a parabola. The paraboloid is **hyperbolic** if every other plane section is either a hyperbola, or two crossing lines (in the case of a section by a tangent plane). The paraboloid is **elliptic** if every other nonempty plane section is either an ellipse, or a single point (in the case of a section by a tangent plane). A paraboloid is either elliptic or hyperbolic.

Equivalently, a paraboloid may be defined as a quadric surface that is not a cylinder, and has an implicit equation whose part of degree two may be factored over the complex numbers into two different linear factors. The paraboloid is hyperbolic if the factors are real; elliptic if the factors are complex conjugate.

An elliptic paraboloid is shaped like an oval cup and has a maximum or minimum point when its axis is vertical. In a suitable coordinate system with three axes *x*, *y*, and *z*, it can be represented by the equation[1]^{:892}

where *a* and *b* are constants that dictate the level of curvature in the *xz* and *yz* planes respectively. In this position, the elliptic paraboloid opens upward.

A hyperbolic paraboloid (not to be confused with a hyperboloid) is a doubly ruled surface shaped like a saddle. In a suitable coordinate system, a hyperbolic paraboloid can be represented by the equation[2][3]^{:896}

In this position, the hyperbolic paraboloid opens downward along the *x*-axis and upward along the *y*-axis (that is, the parabola in the plane *x* = 0 opens upward and the parabola in the plane *y* = 0 opens downward).

Any paraboloid (elliptic or hyperbolic) is a translation surface, as it can be generated by a moving parabola directed by a second parabola.

## Properties and applications

### Elliptic paraboloid

With *a* = *b* an elliptic paraboloid is a *paraboloid of revolution*: a surface obtained by revolving a parabola around its axis. It is the shape of the parabolic reflectors used in mirrors, antenna dishes, and the like; and is also the shape of the surface of a rotating liquid, a principle used in liquid mirror telescopes and in making solid telescope mirrors (see rotating furnace). This shape is also called a *circular paraboloid*.

There is a point called the *focus* (or *focal point*) on the axis of a circular paraboloid such that, if the paraboloid is a mirror, light from a point source at the focus is reflected into a parallel beam, parallel to the axis of the paraboloid. This also works the other way around: a parallel beam of light incident on the paraboloid parallel to its axis is concentrated at the focal point. This applies also for other waves, hence parabolic antennas. For a geometrical proof, click here.

#### Plane sections

As plane sections of an elliptic paraboloid with equation

one gets the following cases:

- a
*parabola*, if the plane is parallel to the z-axis, - an
*ellipse*or a*point*or*empty*, if the plane is not parallel to the z-axis. - a
*point*, if the plane is a tangent plane.

Obviously, any elliptic paraboloid of revolution contains circles. This is also true, but less obvious, in the general case (see circular section).

*Remark:* an elliptic paraboloid is *projectively* equivalent to a sphere.

### Hyperbolic paraboloid

The hyperbolic paraboloid is a doubly ruled surface: it contains two families of mutually skew lines. The lines in each family are parallel to a common plane, but not to each other. Hence the hyperbolic paraboloid is a conoid.

These properties characterize hyperbolic paraboloids and are used in one of the oldest definitions of hyperbolic paraboloids: *a hyperbolic paraboloid is a surface that may be generated by a moving line that is parallel to a fixed plane and crosses two fixed skew lines*. This property makes it simple to manufacture a hyperbolic paraboloid from a variety of materials and for a variety of purposes, from concrete roofs to snack foods.

Pringles potato chips resemble a truncated hyperbolic paraboloid.[4] Their uniform shape allows them to be stacked in sturdy tubular containers, and the strength of the hyperbolic paraboloid shape helps prevent them from breaking while stacked.[5]

- Examples in architecture

- St. Mary's Cathedral, Tokyo
- Cathedral of Saint Mary of the Assumption, San Francisco, California
- Saddledome in Calgary, Alberta, Canada
- London Velopark
- Dogra Hall, Indian Institute of Technology Delhi in New Delhi, India

#### Plane sections

As plane sections of a hyperbolic paraboloid with equation

one gets the following cases:

- a
*parabola*, if the plane is parallel to the z-axis with equation , - a
*line*, if the plane is parallel to the z-axis with equation , - a pair of
*intersecting lines*, if the plane is a tangent plane, - a
*hyperbola*, if the plane is not parallel to the z-axis and not a tangent plane.

*Remarks:*

- A hyperbolic paraboloid is a ruled surface (contains lines), but
*not*developable (in this case it is unlike a cylinder or cone). - The Gauss curvature at any point is negative. Hence it is a saddle surface.
- The
*unit hyperbolic paraboloid*with equation can be represented by after a rotation around the z-axis with an angle of 45° degrees. - A hyperbolic paraboloid is
*projectively*equivalent to a hyperboloid of one sheet.

## Cylinder between pencils of elliptic and hyperbolic paraboloids

The pencil

of elliptic paraboloids and the pencil

of hyperbolic paraboloids approach the same surface

for ,
which is a *parabolic cylinder* (see image).

## Curvature

The elliptic paraboloid, parametrized simply as

and mean curvature

which are both always positive, have their maximum at the origin, become smaller as a point on the surface moves further away from the origin, and tend asymptotically to zero as the said point moves infinitely away from the origin.

The hyperbolic paraboloid,[2] when parametrized as

has Gaussian curvature

and mean curvature

## Geometric representation of multiplication table

If the hyperbolic paraboloid

is rotated by an angle of π/4 in the +*z* direction (according to the right hand rule), the result is the surface

and if *a* = *b* then this simplifies to

- .

Finally, letting *a* = √2, we see that the hyperbolic paraboloid

is congruent to the surface

which can be thought of as the geometric representation (a three-dimensional nomograph, as it were) of a multiplication table.

The two paraboloidal ℝ^{2} → ℝ functions

and

are harmonic conjugates, and together form the analytic function

which is the analytic continuation of the ℝ → ℝ parabolic function *f*(*x*) = *x*^{2}/2.

## Dimensions of a paraboloidal dish

The dimensions of a symmetrical paraboloidal dish are related by the equation

where *F* is the focal length, *D* is the depth of the dish (measured along the axis of symmetry from the vertex to the plane of the rim), and *R* is the radius of the rim. They must all be in the same unit of length. If two of these three lengths are known, this equation can be used to calculate the third.

A more complex calculation is needed to find the diameter of the dish *measured along its surface*. This is sometimes called the "linear diameter", and equals the diameter of a flat, circular sheet of material, usually metal, which is the right size to be cut and bent to make the dish. Two intermediate results are useful in the calculation: *P* = 2*F* (or the equivalent: *P* = *R*^{2}/2*D*) and *Q* = √*P*^{2} + *R*^{2}, where *F*, *D*, and *R* are defined as above. The diameter of the dish, measured along the surface, is then given by

where ln *x* means the natural logarithm of *x*, i.e. its logarithm to base *e*.

The volume of the dish, the amount of liquid it could hold if the rim were horizontal and the vertex at the bottom (e.g. the capacity of a paraboloidal wok), is given by

where the symbols are defined as above. This can be compared with the formulae for the volumes of a cylinder (π*R*^{2}*D*), a hemisphere (2π/3*R*^{2}*D*, where *D* = *R*), and a cone (π/3*R*^{2}*D*). π*R*^{2} is the aperture area of the dish, the area enclosed by the rim, which is proportional to the amount of sunlight a reflector dish can intercept. The surface area of a parabolic dish can be found using the area formula for a surface of revolution which gives

## See also

- Ellipsoid
- Holophones
- Hyperboloid
- Hyperboloid structure
- Liquid mirror telescope, paraboloids produced by rotation
- Parabola
- Parabolic arch
- Parabolic reflector
- Parabolic reflector#Focus-balanced reflector, paraboloid with focus at centre of mass
- Quadratic form
- Rotation of axes
- Saddle point
- Saddle roof
- Translation of axes

## References

- Thomas, George B.; Maurice D. Weir; Joel Hass; Frank R. Giordiano (2005).
*Thomas' Calculus 11th ed*. Pearson Education, Inc. p. 892. ISBN 0-321-18558-7. - Weisstein, Eric W. "Hyperbolic Paraboloid." From MathWorld--A Wolfram Web Resource. http://mathworld.wolfram.com/HyperbolicParaboloid.html
- Thomas, George B.; Maurice D. Weir; Joel Hass; Frank R. Giordiano (2005).
*Thomas' Calculus 11th ed*. Pearson Education, Inc. p. 896. ISBN 0-321-18558-7. - Zill, Dennis G.; Wright, Warren S. (2011),
*Calculus: Early Transcendentals*, Jones & Bartlett Publishers, p. 649, ISBN 9781449644482. - Wyman, Carolyn (2004), "Pringles potato chips: A new use for tennis ball cans",
*Better Than Homemade: Amazing Foods that Changed the Way We Eat*, Quirk Books, pp. 47–49, ISBN 9781931686426.