Lock picking is the practice of unlocking a lock by manipulating the components of the lock device without the original key.
Although lock-picking can be associated with criminal intent, it is an essential skill for the legitimate profession of locksmithing, and is also pursued by law-abiding citizens as a useful skill to learn, or simply as a hobby (locksport).
In some countries, such as Japan, lock-picking tools are illegal for most people to possess, but in many others, they are available and legal to own as long as there is no intent to use them for criminal purposes.
Locks by definition secure or fasten something with the intention that access be possible only with the matching key. Despite this, it is likely that criminal lock picking started with the first locks. Famed locksmith Alfred Charles Hobbs said in the mid 1800s:
Rogues are very keen in their profession, and know already much more than we can teach them respecting their several kinds of roguery. Rogues knew a good deal about lock-picking long before locksmiths discussed it among themselves...
Professional and recreational lock picking also has a long history. King Louis XVI of France (1754–1793) was a keen designer, picker and manipulator of locks, and physicist Richard Feynman picked locks for fun in the 1940s while employed on the Manhattan Project. The tradition of student roof and tunnel hacking at MIT included lockpicking, and their guide to this was made widely available in 1991.
Beginning in 1997 more organised recreational lockpicking has now grown and developed a competitive aspect in "locksport", along with its own governing body, Locksport International.
The warded pick, also known as a skeleton key, is used for opening warded locks. It is generally made to conform to a generalized key shape relatively simpler than the actual key used to open the lock; this simpler shape allows for internal manipulations.
The keys for warded locks only require the back end manipulating which is the end which actually opens the lock. The other parts are there to distinguish between different variation of their locks. I.e if you have a chest of drawers with a warded lock you can make a skeleton key for that type of warded lock by filing away all but the last one or two teeth or bittings on both sides of the blade. Additionally, a series of grooves on either side of the key's blade limit the type of lock the key can slide into. As the key slides into the lock through the keyway, the wards align with the grooves in the key's profile to allow or deny entry into the lock cylinder.
Lever tumbler lock picking
Lever tumbler locks can be opened by a type of lockpick called curtain pick.
Pin tumbler lock picking
The tension wrench, or torsion wrench, is generally used when picking a pin/tumbler or wafer lock. It is used to apply torque to the plug of a lock in order to hold any picked pins in place. Once all pins are picked, the tension wrench is then used to turn the plug and open the lock. There are two basic types: "bottom of the keyway" and "top of the keyway". Bottom of the keyway wrenches are typically shaped like a letter "L", although the vertical part of the letter is elongated in comparison to the horizontal part. Other tension tools, especially those for use with cars, resemble a pair of tweezers and allow the user to apply torque to both the top and the bottom of the lock. These are commonly used with double-sided wafer locks.
This versatile pick is included in nearly all kits and is mainly used for picking individual pins, but can also be used for raking and for wafer and disk locks. The triangular-shaped half-diamond is usually 2.5 to 12.2 millimeters (0.098 to 0.480 inches) long. The angles that form the base of the half-diamond can be either steep or shallow, depending on the need for picking without affecting neighboring pins, or raking as appropriate. A normal set comprises around three half-diamond picks and a full-diamond pick.
The hook pick is similar to the half-diamond pick, but has a hook-shaped tip rather than a half-diamond shape. The hook pick is sometimes referred to as a "feeler" or "finger" and is not used for raking. This is the most basic lockpicking tool and is all that a professional will usually need if the lock is to be picked in the traditional sense rather than opened by raking or using a pick gun. A variety of differently sized and shaped hooks are available in a normal set.
The ball pick is similar to the half-diamond pick, except the end of the pick has a half or full circle shape. This pick is commonly used to open wafer locks.
These picks, such as the common snake rake, are designed to rake pins by rapidly sliding the pick past all the pins, repeatedly, in order to bounce the pins until they reach the shear line. This method requires much less skill than picking pins individually, and generally works well on cheaper locks. Advanced rakes are available which are shaped to mimic various different pin height key positions and are considerably easier to use than traditional rakes. Such rakes are typically machined from a template of common key configurations, since not all permutations of pin heights for adjacent pins are possible given the process by which keys are manufactured.
The decoder pick is a key which has been adapted such that the height of its notches can be changed, either by screwing them into the blade base or by adjusting them from the handle while the key is in the lock. This will allow not only access to the lock but also a template for cutting a replacement key.
The simplest way to open the majority of pin locks is to insert a key (or variety of keys) which have been cut so that each peak of the key is equal and has been cut down to the lowest groove of the key. This key is then struck sharply with a hammer whilst applying torque. The force of the blow is carried down the length of the key and (operating as does a Newton's cradle) will move only the driver pins leaving the key pins in place. If done correctly this briefly creates a gap around the shear line allowing the plug to rotate freely. Some modern high security locks include bumping protection, such as Master Lock's "BumpStop" and Ilco's "Bump Halt" technology.
Wafer tumbler lock picking
Jigglers or try-out keys
Majority of wafer tumbler locks can be opened with a set of jigglers or try-out keys. They can also be opened with pin-tumbler picks.
The manual pick gun (or snap gun) was invented by Ely Epstein. It usually has a trigger that creates a movement which (like bump keys) transfers sudden energy to the key pins which communicate this to the driver pins causing those pins only to jump, allowing the cylinder to turn freely for a brief moment, until the pin springs return the pins to their locking position. Electric versions are now also common, where by simply pressing a button the pins are vibrated while the normal torsion wrench is being used.
Tubular lock pick
A tubular lock pick is a specialized lockpicking tool used for opening a tubular pin tumbler lock. Tubular lock picks are all very similar in design and come in sizes to fit all major tubular locks, including 6, 7, 8, and 10-pin locks. The tool is simply inserted into the lock and turned clockwise with medium torque. As the tool is pushed into the lock, each of the pins is slowly forced down until they stop, thus binding the driver pins behind the shear line of the lock. When the final pick is pushed down, the shear plane is clear and the lock opens. This can usually be accomplished in a matter of seconds.
Most tubular lock picks come with a "decoder" which lets the locksmith know at what depths the pins broke the shear plane. By using the decoding key after the lock has been picked, the locksmith can cut a tubular key to the correct pin depths and thus avoid having to replace the lock.
Today's anti-picking methods in standard pin tumbler locks include the use of side wards which obstruct the key way, and "security pins". These are shaped like a spool, mushroom, or barrel - with the effect that they feel as though they have set when in fact they have not.
In Australia possession of lock picking equipment is legal as long as a reasonable explanation can be demonstrated for such.
In Canada, possession of lock picking tools, with the exception of key duplication tools, is legal. Lock pick tools fit in the same category as crowbars or hammers, meaning they are legal to possess and use unless they are used to commit a crime or if it is shown there was intention to commit a crime. Section 351 of the Canadian Criminal Code states "Every person who, without lawful excuse, has in their possession any instrument suitable for the purpose of breaking into any place, motor vehicle, vault or safe knowing that the instrument has been used or is intended to be used for that purpose,
(a) is guilty of an indictable offence and liable to imprisonment for a term not exceeding ten years; or
Some provinces require a license to carry lock picks. Unlike most laws in Canada, the onus is on the defendant to prove that they have a legal purpose to use the lock picks. Similar to some drug trafficking offences, this may be automatically applied if possession is discovered, though corroborating evidence is needed to support these charges. Hobbyist use and indications thereof should constitute reasonable doubt, though it is necessary for the defendant to prove legal purposes, the crown must still indicate the charges are reasonable given the circumstances. For example, the discovery of lock picks in a dwelling house in absence of other indications of burglary are not grounds for this charge. It is not uncommon for hackathon events in Canada to have lock picking challenges, and this would constitute a reasonable and legal reason for possession.
There is no law or regulation on lock picking, so it is legal as long as one has permission from the owner of the lock to pick the lock in question. Lock picking tools can be freely bought and sold. There are several clubs where lock picking is practised as a sport. Lock picking has also become a popular part of geocaching in Germany. There are also lock picking workshops at geocaching events.
Most countries of the European Union don't regulate the possession of lockpicks. All responsibility concerning criminal or legal acts using the picks is taken by the owner of the lockpicks.
Unusual for a country in the EU, ownership of lock picks in Hungary is completely prohibited, even for professional locksmiths. Lock picks are classified as military equipment, and may only be legally obtained or used by Hungary's armed forces.
Japan's law prohibits possession of any lock picking tools and carries a penalty of one year imprisonment or a 500,000 yen fine.
In the Netherlands, owning lock picks is legal, but using them on someone else's locks without permission is not. There is a lock picking championship, the Dutch Open (organized by TOOOL), which started in 2002 and features competitors from around the world. The competition is held during LockCon, an annual conference about locks.
In Poland, according to Article 129/1 of the Criminal Code: both (1) possessing, producing or obtaining a lock pick by a person whose profession and occupation does not require it; and (2) delivering a lock pick to a person whose profession and occupation does not require it is punishable with arrest, freedom limitation or fine - and (3) a lock pick is forfeited even if it was not the property of the principal.
In the United States, laws concerning possession of lock picks vary from state to state. Generally, possession and use of lock picks is considered equivalent to the possession of a crowbar or any other tool that may or may not be used in a burglary. Possession of lock picks with an intent for their unlawful use is generally prosecuted as a misdemeanor under the category of possession of burglary tools or similar statutes. In many states, simple possession of lock picks is completely legal, as the statutes only prohibit the possession of lock picks or the activity of lock picking when there is a malicious intent. This is the case in Arizona, California, Utah, Maine, Massachusetts, New Hampshire, Washington D.C., Washington State, and New York. Some states, such as California and New York, impose restrictions on businesses, such as prohibiting the operation of a locksmithing business without a license and imposing requirements to keep records about sales of lock picking devices.
- A. C. Hobbs (Charles Tomlinson, ed.), Locks and Safes: The Construction of Locks. Published by Virtue & Co., London, 1853 (revised 1868).
- Andress, David. "The Terror", Farrar, Straus and Giroux, New York, 2005, p. 12-13
- "From rei@MIT.EDU Fri Jul 14 14:23:49 1995". Mit.edu. Retrieved 19 September 2017.
Executive Summary: The MIT Hacking community is saddened by the series of recent events which have made the "MIT Guide To Lockpicking" available electronically in a indiscriminate fashion.
- "MIT Guide to Lock Picking" (PDF). People.csail.mit.edu. September 1, 1991. Retrieved 23 November 2017.
- "SSDeV - The world's first sport lockpicking group - founded 1997 in Germany". Lockpicking.org. Retrieved 23 November 2017.
- "Lockpicking - Toool". Toool.nl. Retrieved 23 November 2017.
- News, A. B. C. (7 January 2006). "Lock Picking for Sport Cracks the Mainstream". ABC News. Retrieved 23 November 2017.
- ""Hobbyists embrace the joys of picking locks"" (PDF). Blogs.kansascity.com. Archived from the original (PDF) on 12 February 2012. Retrieved 23 November 2017.
- "Understanding Bump Keys (Video)". L. Scott Harrell. 19 Apr 2009. Retrieved Oct 1, 2015.
- Lock®, Master. "Security Enhancements - Master Lock". Masterlock.com. Retrieved 23 November 2017.
- "ILCO Key Systems". Kaba-ilco.com. Retrieved 23 November 2017.
- "Founders - The Legacy". Lockmuseumofamerica.org. Retrieved 2016-03-08.
- "Security pin - Lockwiki". Lockwiki.com. Retrieved 2016-03-08.
- "SUMMARY OFFENCES BILL 2004 Explanatory Notes". Austlii.edu.au. Retrieved 2016-04-13.
- "Review of Maximum Penalties for Preparatory Offences Report" (PDF). Sentencingcouncil.vic.gov.au. Retrieved 23 November 2017.
- Archived 2012-03-28 at the Wayback Machine
- "Criminal Code". Laws-lois.justice.gc.ca. Retrieved 2016-04-13.
- "Can You Buy Lock Picks in Canada? Yes AND No". Lock King. 18 January 2016. Retrieved 12 January 2019.
- David Schafbuch (2014-03-22). "'Lockpicking' als Hobby - Sesam, öffne dich" (in German).
- Bookmark list of lock picking geocaches for basic members at geocaching.com, retrieved on June 12th, 2018.
- Listing to the event GC321V2, retrieved on June 12th, 2018.
- "175/2003. (X. 28.) Korm. rendelet a közbiztonságra különösen veszélyes eszközökről". Jogtár. Wolters Kluwer. Retrieved 2019-09-28.
- "Lockpicking - Toool". Toool.nl. Retrieved 23 November 2017.
- "Lock pickers hebben slot in paar seconden open", the Leeuwarder Courant, 2002-12-02
- "Vito Tieke", Even Vragen Aan, the Algemeen Dagblad, 2002-12-02
- "Duitser kampioen sloten openen", the Sp!ts, probably 2002-12-02
- "Duitser wordt in Sneek kampioen sloten openen", the Friesch Dagblad, probably 2002-12-02
- "Duitser eerste kampioen sloten openen in Sneek", the Dagblad van het Noorden, probably 2002-12-02
- "Sloten openen als nieuwe sport", Dagblad de Limburger, probably 2002-12-02
- It was also documented on television, in the programs Hart van Nederland and on Omproep Friesland.
- "New Zealand Crimes Act (1961), Section 223, subsection 1 - Being disguised or in possession of instrument for burglary". Legislation.govt.nz. Retrieved 2008-03-26.
- "Legislation index". Legislation.gov.uk. Retrieved 2013-06-28.
- "California Penal Codes, Sections 466–469". California Legislative Information.
- "Arizona Revised Statutes Title 13 – Chapter 13 – Section 13-1505". Arizona State Legislature. Retrieved July 10, 2010.
- "Utah Criminal Code: Title 76 – Chapter 06 - Section 205". Le.utah.gov. Archived from the original on 4 October 2015. Retrieved 23 November 2017.
- "Possession of burglarious tools" (PDF). Massachusetts Court System. Massachusetts Court System. 2009. Retrieved March 7, 2016.
- "Section 635:1 Burglary". Gencourt.state.nh.us. Retrieved 2016-03-08.
- "RCW 9A.52.060: Making or having burglar tools". App.leg.wa.gov. Retrieved 2016-03-08.
- "Possession of burglar's tools" (PDF). Nycourts.gov/. New York State Unified Court System. September 1, 1967. Retrieved March 7, 2016.
- "California State Business and Professions Code – Chapter 8.5. Locksmiths". California Department of Consumer Affairs. Retrieved August 23, 2018.
- "Locksmith License". 1.nyc.gov. Retrieved 2016-03-08.