In mathematical statistics, the Kullback–Leibler divergence (also called relative entropy) is a measure of how one probability distribution is different from a second, reference probability distribution. Applications include characterizing the relative (Shannon) entropy in information systems, randomness in continuous time-series, and information gain when comparing statistical models of inference. In contrast to variation of information, it is a distribution-wise asymmetric measure and thus does not qualify as a statistical metric of spread (it also does not satisfy the triangle inequality). In the simple case, a Kullback–Leibler divergence of 0 indicates that the two distributions in question are identical. In simplified terms, it is a measure of surprise, with diverse applications such as applied statistics, fluid mechanics, neuroscience and machine learning.
The Kullback–Leibler divergence was introduced by Solomon Kullback and Richard Leibler in 1951 as the directed divergence between two distributions; Kullback preferred the term discrimination information. The divergence is discussed in Kullback's 1959 book, Information Theory and Statistics.
which is equivalent to
In other words, it is the expectation of the logarithmic difference between the probabilities and , where the expectation is taken using the probabilities . The Kullback–Leibler divergence is defined only if for all , implies (absolute continuity). Whenever is zero the contribution of the corresponding term is interpreted as zero because
For distributions and of a continuous random variable, the Kullback–Leibler divergence is defined to be the integral::p. 55
where and denote the probability densities of and .
which is the entropy of relative to . Continuing in this case, if is any measure on for which and exist (meaning that and are absolutely continuous with respect to ), then the Kullback–Leibler divergence from to is given as
The logarithms in these formulae are taken to base 2 if information is measured in units of bits, or to base if information is measured in nats. Most formulas involving the Kullback–Leibler divergence hold regardless of the base of the logarithm.
Various conventions exist for referring to in words. Often it is referred to as the divergence between and , but this fails to convey the fundamental asymmetry in the relation. Sometimes, as in this article, it may be found described as the divergence of from or as the divergence from to . This reflects the asymmetry in Bayesian inference, which starts from a prior and updates to the posterior . Another common way to refer to is as the relative entropy of with respect to .
Kullback gives the following example (Table 2.1, Example 2.1). Let and be the distributions shown in the table and figure. is the distribution on the left side of the figure, a binomial distribution with and . is the distribution on the right side of the figure, a discrete uniform distribution with the three possible outcomes , , or (i.e. ), each with probability .
The Kullback–Leibler divergence from to is often denoted .
In the context of machine learning, is often called the information gain achieved if is used instead of . By analogy with information theory, it is also called the relative entropy of with respect to . In the context of coding theory, can be constructed by measuring the expected number of extra bits required to code samples from using a code optimized for rather than the code optimized for .
Expressed in the language of Bayesian inference, is a measure of the information gained when one revises one's beliefs from the prior probability distribution to the posterior probability distribution . In other words, it is the amount of information lost when is used to approximate . In applications, typically represents the "true" distribution of data, observations, or a precisely calculated theoretical distribution, while typically represents a theory, model, description, or approximation of . In order to find a distribution that is closest to , we can minimize KL divergence and compute an information projection.
The Kullback–Leibler divergence is a special case of a broader class of statistical divergences called f-divergences as well as the class of Bregman divergences. It is the only such divergence over probabilities that is a member of both classes. Although it is often intuited as a way of measuring the distance between probability distributions, the Kullback–Leibler divergence is not a true metric. It does not obey the triangle inequality, and in general does not equal . However, its infinitesimal form, specifically its Hessian, gives a metric tensor known as the Fisher information metric.
Arthur Hobson proved that the Kullback–Leibler divergence is the only measure of difference between probability distributions that satisfies some desired properties, which are the canonical extension to those appearing in a commonly used characterization of entropy. Consequently, mutual information is the only measure of mutual dependence that obeys certain related conditions, since it can be defined in terms of Kullback–Leibler divergence.
In information theory, the Kraft–McMillan theorem establishes that any directly decodable coding scheme for coding a message to identify one value out of a set of possibilities can be seen as representing an implicit probability distribution over , where is the length of the code for in bits. Therefore, the Kullback–Leibler divergence can be interpreted as the expected extra message-length per datum that must be communicated if a code that is optimal for a given (wrong) distribution is used, compared to using a code based on the true distribution .
The KL divergence can be thought of as something like a measurement of how far the distribution Q is from the distribution P. The cross-entropy is itself such a measurement, but it has the defect that isn't zero, so we subtract to make agree more closely with our notion of distance. (Unfortunately it still isn't symmetric.)
- The Kullback–Leibler divergence is always non-negative,
- a result known as Gibbs' inequality, with zero if and only if almost everywhere. The entropy thus sets a minimum value for the cross-entropy , the expected number of bits required when using a code based on rather than ; and the Kullback–Leibler divergence therefore represents the expected number of extra bits that must be transmitted to identify a value drawn from , if a code is used corresponding to the probability distribution , rather than the "true" distribution .
- The Kullback–Leibler divergence remains well-defined for continuous distributions, and furthermore is invariant under parameter transformations. For example, if a transformation is made from variable to variable , then, since and the Kullback–Leibler divergence may be rewritten:
- where and . Although it was assumed that the transformation was continuous, this need not be the case. This also shows that the Kullback–Leibler divergence produces a dimensionally consistent quantity, since if is a dimensioned variable, and are also dimensioned, since e.g. is dimensionless. The argument of the logarithmic term is and remains dimensionless, as it must. It can therefore be seen as in some ways a more fundamental quantity than some other properties in information theory (such as self-information or Shannon entropy), which can become undefined or negative for non-discrete probabilities.
- The Kullback–Leibler divergence is additive for independent distributions in much the same way as Shannon entropy. If are independent distributions, with the joint distribution , and likewise, then
- The Kullback–Leibler divergence is convex in the pair of probability mass functions , i.e. if and are two pairs of probability mass functions, then
Multivariate normal distributions
Suppose that we have two multivariate normal distributions, with means and with (non-singular) covariance matrices If the two distributions have the same dimension, , then the Kullback–Leibler divergence between the distributions is as follows::p. 13
The logarithm in the last term must be taken to base e since all terms apart from the last are base-e logarithms of expressions that are either factors of the density function or otherwise arise naturally. The equation therefore gives a result measured in nats. Dividing the entire expression above by yields the divergence in bits.
A special case, and a common quantity in variational inference, is the KL-divergence between a diagonal multivariate normal, and a standard normal distribution (with zero mean and unit variance):
Relation to metrics
One might be tempted to call the Kullback–Leibler divergence a "distance metric" on the space of probability distributions, but this would not be correct as it is not symmetric – that is, – nor does it satisfy the triangle inequality. Even so, being a premetric, it generates a topology on the space of probability distributions. More concretely, if is a sequence of distributions such that
then it is said that
Pinsker's inequality entails that
where the latter stands for the usual convergence in total variation.
Following Rényi (1970, 1961)
Fisher information metric
The Kullback–Leibler divergence is directly related to the Fisher information metric. This can be made explicit as follows. Assume that the probability distributions and are both parameterized by some (possibly multi-dimensional) parameter . Consider then two close-by values of and so that the parameter differs by only a small amount from the parameter value . Specifically, up to first order one has (using the Einstein summation convention)
with a small change of in the direction, and the corresponding rate of change in the probability distribution. Since the Kullback–Leibler divergence has an absolute minimum 0 for , i.e. , it changes only to second order in the small parameters . More formally, as for any minimum, the first derivatives of the divergence vanish
and by the Taylor expansion one has up to second order
where the Hessian matrix of the divergence
Fisher information metric theorem
When satisfies the following regularity conditions:
where ξ is independent of ρ
Relation to other quantities of information theory
Many of the other quantities of information theory can be interpreted as applications of the Kullback–Leibler divergence to specific cases.
When applied to a discrete random variable, the self-information can be represented as
is the Kullback–Leibler divergence of the probability distribution from a Kronecker delta representing certainty that — i.e. the number of extra bits that must be transmitted to identify if only the probability distribution is available to the receiver, not the fact that .
The mutual information,
is the Kullback–Leibler divergence of the product of the two marginal probability distributions from the joint probability distribution — i.e. the expected number of extra bits that must be transmitted to identify and if they are coded using only their marginal distributions instead of the joint distribution. Equivalently, if the joint probability is known, it is the expected number of extra bits that must on average be sent to identify if the value of is not already known to the receiver.
The Shannon entropy,
is the number of bits which would have to be transmitted to identify from equally likely possibilities, less the Kullback–Leibler divergence of the uniform distribution on the random variates of , , from the true distribution — i.e. less the expected number of bits saved, which would have had to be sent if the value of were coded according to the uniform distribution rather than the true distribution .
The conditional entropy,
is the number of bits which would have to be transmitted to identify from equally likely possibilities, less the Kullback–Leibler divergence of the product distribution from the true joint distribution — i.e. less the expected number of bits saved which would have had to be sent if the value of were coded according to the uniform distribution rather than the conditional distribution of given .
The cross entropy between two probability distributions measures the average number of bits needed to identify an event from a set of possibilities, if a coding scheme is used based on a given probability distribution q, rather than the "true" distribution p. The cross entropy for two distributions p and q over the same probability space is thus defined as follows:
In Bayesian statistics the Kullback–Leibler divergence can be used as a measure of the information gain in moving from a prior distribution to a posterior distribution: . If some new fact is discovered, it can be used to update the posterior distribution for from to a new posterior distribution using Bayes' theorem:
This distribution has a new entropy:
which may be less than or greater than the original entropy . However, from the standpoint of the new probability distribution one can estimate that to have used the original code based on instead of a new code based on would have added an expected number of bits:
to the message length. This therefore represents the amount of useful information, or information gain, about , that we can estimate has been learned by discovering .
If a further piece of data, , subsequently comes in, the probability distribution for can be updated further, to give a new best guess . If one reinvestigates the information gain for using rather than , it turns out that it may be either greater or less than previously estimated:
- may be ≤ or > than
and so the combined information gain does not obey the triangle inequality:
- may be <, = or > than
All one can say is that on average, averaging using , the two sides will average out.
Bayesian experimental design
A common goal in Bayesian experimental design is to maximise the expected Kullback–Leibler divergence between the prior and the posterior. When posteriors are approximated to be Gaussian distributions, a design maximising the expected Kullback–Leibler divergence is called Bayes d-optimal.
The Kullback–Leibler divergence can also be interpreted as the expected discrimination information for over : the mean information per sample for discriminating in favor of a hypothesis against a hypothesis , when hypothesis is true. Another name for this quantity, given to it by I. J. Good, is the expected weight of evidence for over to be expected from each sample.
The expected weight of evidence for over is not the same as the information gain expected per sample about the probability distribution of the hypotheses,
Either of the two quantities can be used as a utility function in Bayesian experimental design, to choose an optimal next question to investigate: but they will in general lead to rather different experimental strategies.
On the entropy scale of information gain there is very little difference between near certainty and absolute certainty—coding according to a near certainty requires hardly any more bits than coding according to an absolute certainty. On the other hand, on the logit scale implied by weight of evidence, the difference between the two is enormous – infinite perhaps; this might reflect the difference between being almost sure (on a probabilistic level) that, say, the Riemann hypothesis is correct, compared to being certain that it is correct because one has a mathematical proof. These two different scales of loss function for uncertainty are both useful, according to how well each reflects the particular circumstances of the problem in question.
Principle of minimum discrimination information
The idea of Kullback–Leibler divergence as discrimination information led Kullback to propose the Principle of Minimum Discrimination Information (MDI): given new facts, a new distribution should be chosen which is as hard to discriminate from the original distribution as possible; so that the new data produces as small an information gain as possible.
For example, if one had a prior distribution over and , and subsequently learnt the true distribution of was , then the Kullback–Leibler divergence between the new joint distribution for and , , and the earlier prior distribution would be:
i.e. the sum of the Kullback–Leibler divergence of the prior distribution for from the updated distribution , plus the expected value (using the probability distribution ) of the Kullback–Leibler divergence of the prior conditional distribution from the new conditional distribution . (Note that often the later expected value is called the conditional Kullback–Leibler divergence (or conditional relative entropy) and denoted by :p. 22) This is minimized if over the whole support of ; and we note that this result incorporates Bayes' theorem, if the new distribution is in fact a δ function representing certainty that has one particular value.
MDI can be seen as an extension of Laplace's Principle of Insufficient Reason, and the Principle of Maximum Entropy of E.T. Jaynes. In particular, it is the natural extension of the principle of maximum entropy from discrete to continuous distributions, for which Shannon entropy ceases to be so useful (see differential entropy), but the Kullback–Leibler divergence continues to be just as relevant.
In the engineering literature, MDI is sometimes called the Principle of Minimum Cross-Entropy (MCE) or Minxent for short. Minimising the Kullback–Leibler divergence from to with respect to is equivalent to minimizing the cross-entropy of and , since
which is appropriate if one is trying to choose an adequate approximation to . However, this is just as often not the task one is trying to achieve. Instead, just as often it is that is some fixed prior reference measure, and that one is attempting to optimise by minimising subject to some constraint. This has led to some ambiguity in the literature, with some authors attempting to resolve the inconsistency by redefining cross-entropy to be , rather than .
Relationship to available work
Surprisals add where probabilities multiply. The surprisal for an event of probability is defined as . If is then surprisal is in nats, bits, or so that, for instance, there are bits of surprisal for landing all "heads" on a toss of coins.
Best-guess states (e.g. for atoms in a gas) are inferred by maximizing the average surprisal (entropy) for a given set of control parameters (like pressure or volume ). This constrained entropy maximization, both classically and quantum mechanically, minimizes Gibbs availability in entropy units where is a constrained multiplicity or partition function.
When temperature is fixed, free energy () is also minimized. Thus if and number of molecules are constant, the Helmholtz free energy (where is energy) is minimized as a system "equilibrates." If and are held constant (say during processes in your body), the Gibbs free energy is minimized instead. The change in free energy under these conditions is a measure of available work that might be done in the process. Thus available work for an ideal gas at constant temperature and pressure is where and (see also Gibbs inequality).
More generally the work available relative to some ambient is obtained by multiplying ambient temperature by Kullback–Leibler divergence or net surprisal defined as the average value of where is the probability of a given state under ambient conditions. For instance, the work available in equilibrating a monatomic ideal gas to ambient values of and is thus , where Kullback–Leibler divergence
The resulting contours of constant Kullback–Leibler divergence, shown at right for a mole of Argon at standard temperature and pressure, for example put limits on the conversion of hot to cold as in flame-powered air-conditioning or in the unpowered device to convert boiling-water to ice-water discussed here. Thus Kullback–Leibler divergence measures thermodynamic availability in bits.
Quantum information theory
Relationship between models and reality
Just as Kullback–Leibler divergence of "actual from ambient" measures thermodynamic availability, Kullback–Leibler divergence of "reality from a model" is also useful even if the only clues we have about reality are some experimental measurements. In the former case Kullback–Leibler divergence describes distance to equilibrium or (when multiplied by ambient temperature) the amount of available work, while in the latter case it tells you about surprises that reality has up its sleeve or, in other words, how much the model has yet to learn.
Although this tool for evaluating models against systems that are accessible experimentally may be applied in any field, its application to selecting a statistical model via Akaike information criterion are particularly well described in papers and a book by Burnham and Anderson. In a nutshell the Kullback–Leibler divergence of reality from a model may be estimated, to within a constant additive term, by a function (like the squares summed) of the deviations observed between data and the model's predictions. Estimates of such divergence for models that share the same additive term can in turn be used to select among models.
Kullback and Leibler themselves actually defined the divergence as:
which is symmetric and nonnegative. This quantity has sometimes been used for feature selection in classification problems, where and are the conditional pdfs of a feature under two different classes. In the Banking and Finance industries, this quantity is referred to as Population Stability Index, and is used to assess distributional shifts in model features through time.
An alternative is given via the divergence,
which can be interpreted as the expected information gain about from discovering which probability distribution is drawn from, or , if they currently have probabilities and respectively.
The value gives the Jensen–Shannon divergence, defined by
where is the average of the two distributions,
can also be interpreted as the capacity of a noisy information channel with two inputs giving the output distributions and . The Jensen–Shannon divergence, like all f-divergences, is locally proportional to the Fisher information metric. It is similar to the Hellinger metric (in the sense that induces the same affine connection on a statistical manifold).
Relationship to other probability-distance measures
There are many other important measures of probability distance. Some of these are particularly connected with the Kullback–Leibler divergence. For example:
- The total variation distance, . This is connected to the divergence through Pinsker's inequality:
- The family of Rényi divergences provide generalizations of the Kullback–Leibler divergence. Depending on the value of a certain parameter, , various inequalities may be deduced.
Other notable measures of distance include the Hellinger distance, histogram intersection, Chi-squared statistic, quadratic form distance, match distance, Kolmogorov–Smirnov distance, and earth mover's distance.
Just as absolute entropy serves as theoretical background for data compression, relative entropy serves as theoretical background for data differencing – the absolute entropy of a set of data in this sense being the data required to reconstruct it (minimum compressed size), while the relative entropy of a target set of data, given a source set of data, is the data required to reconstruct the target given the source (minimum size of a patch).
- Akaike information criterion
- Bayesian information criterion
- Bregman divergence
- Deviance information criterion
- Entropic value at risk
- Entropy power inequality
- Information gain in decision trees
- Information gain ratio
- Information theory and measure theory
- Jensen–Shannon divergence
- Quantum relative entropy
- Solomon Kullback and Richard Leibler
- Kullback, S.; Leibler, R.A. (1951). "On information and sufficiency" (PDF). Annals of Mathematical Statistics. 22 (1): 79–86. doi:10.1214/aoms/1177729694. MR 0039968.
- Kullback, S. (1959), Information Theory and Statistics, John Wiley & Sons. Republished by Dover Publications in 1968; reprinted in 1978: ISBN 0-8446-5625-9.
- Kullback, S. (1987). "Letter to the Editor: The Kullback–Leibler distance". The American Statistician. 41 (4): 340–341. doi:10.1080/00031305.1987.10475510. JSTOR 2684769.
- MacKay, David J.C. (2003). Information Theory, Inference, and Learning Algorithms (First ed.). Cambridge University Press. p. 34.
- Bishop C. (2006). Pattern Recognition and Machine Learning
- Burnham, K. P.; Anderson, D. R. (2002). Model Selection and Multi-Model Inference (2nd ed.). Springer. p. 51. ISBN 9780387953649.
- Hobson, Arthur (1971). Concepts in statistical mechanics. New York: Gordon and Breach. ISBN 978-0677032405.
- Sanov, I.N. (1957). "On the probability of large deviations of random magnitudes". Mat. Sbornik. 42 (84): 11–44.
- Novak S.Y. (2011), Extreme Value Methods with Applications to Finance ch. 14.5 (Chapman & Hall). ISBN 978-1-4398-3574-6.
- See the section "differential entropy – 4" in Relative Entropy video lecture by Sergio Verdú NIPS 2009
- Duchi J., "Derivations for Linear Algebra and Optimization".
- Rényi A. (1970). Probability Theory. Elsevier. Appendix, Sec.4. ISBN 978-0-486-45867-0.
- Rényi, A. (1961), "On measures of entropy and information" (PDF), Proceedings of the 4th Berkeley Symposium on Mathematics, Statistics and Probability 1960, pp. 547–561
- Chaloner, K.; Verdinelli, I. (1995). "Bayesian experimental design: a review". Statistical Science. 10 (3): 273–304. doi:10.1214/ss/1177009939.
- Press, W.H.; Teukolsky, S.A.; Vetterling, W.T.; Flannery, B.P. (2007). "Section 14.7.2. Kullback–Leibler Distance". Numerical Recipes: The Art of Scientific Computing (3rd ed.). Cambridge University Press. ISBN 978-0-521-88068-8.
- Thomas M. Cover, Joy A. Thomas (1991) Elements of Information Theory (John Wiley & Sons)
- Myron Tribus (1961), Thermodynamics and Thermostatics (D. Van Nostrand, New York)
- Jaynes, E. T. (1957). "Information theory and statistical mechanics" (PDF). Physical Review. 106 (4): 620–630. Bibcode:1957PhRv..106..620J. doi:10.1103/physrev.106.620.
- Jaynes, E. T. (1957). "Information theory and statistical mechanics II" (PDF). Physical Review. 108 (2): 171–190. Bibcode:1957PhRv..108..171J. doi:10.1103/physrev.108.171.
- J.W. Gibbs (1873), "A method of geometrical representation of thermodynamic properties of substances by means of surfaces", reprinted in The Collected Works of J. W. Gibbs, Volume I Thermodynamics, ed. W. R. Longley and R. G. Van Name (New York: Longmans, Green, 1931) footnote page 52.
- Tribus, M.; McIrvine, E. C. (1971). "Energy and information". Scientific American. 224 (3): 179–186. Bibcode:1971SciAm.225c.179T. doi:10.1038/scientificamerican0971-179.
- Fraundorf, P. (2007). "Thermal roots of correlation-based complexity". Complexity. 13 (3): 18–26. arXiv:1103.2481. Bibcode:2008Cmplx..13c..18F. doi:10.1002/cplx.20195.
- Burnham, K.P.; Anderson, D.R. (2001). "Kullback–Leibler information as a basis for strong inference in ecological studies". Wildlife Research. 28 (2): 111–119. doi:10.1071/WR99107.
- Burnham, K. P. and Anderson D. R. (2002), Model Selection and Multimodel Inference: A Practical Information-Theoretic Approach, Second Edition (Springer Science) ISBN 978-0-387-95364-9.
- Rubner, Y.; Tomasi, C.; Guibas, L. J. (2000). "The earth mover's distance as a metric for image retrieval". International Journal of Computer Vision. 40 (2): 99–121. doi:10.1023/A:1026543900054.
- Information Theoretical Estimators Toolbox
- Ruby gem for calculating Kullback–Leibler divergence
- Jon Shlens' tutorial on Kullback–Leibler divergence and likelihood theory
- Matlab code for calculating Kullback–Leibler divergence for discrete distributions
- Sergio Verdú, Relative Entropy, NIPS 2009. One-hour video lecture.
- A modern summary of info-theoretic divergence measures