The type 704 Electronic Data-Processing Machine is a large-scale, high-speed electronic calculator controlled by an internally stored program of the single address type.
The 704 at that time was thus regarded as "pretty much the only computer that could handle complex math." The 704 was a significant improvement over the earlier IBM 701 in terms of architecture and implementation. Like the 701, the 704 uses vacuum tube logic circuitry and 36-bit binary words. Changes from the 701 include the use of core memory instead of Williams tubes, floating-point arithmetic instructions, 15-bit addressing and the addition of three index registers. To support these new features, the instructions were expanded to use the full 36-bit word. The new instruction set, which is not compatible with the 701, became the base for the "scientific architecture" subclass of the IBM 700/7000 series computers.
In 1962 physicist John Larry Kelly, Jr created one of the most famous moments in the history of Bell Labs by using an IBM 704 computer to synthesize speech. Kelly's voice recorder synthesizer vocoder recreated the song Daisy Bell, with musical accompaniment from Max Mathews. Arthur C. Clarke was coincidentally visiting friend and colleague John Pierce at the Bell Labs Murray Hill facility at the time of this speech synthesis demonstration, and Clarke was so impressed that six years later he used it in the climactic scene of his novel and screenplay for 2001: A Space Odyssey, where the HAL 9000 computer sings the same song.
Edward O. Thorp, a math instructor at MIT, used the IBM 704 as a research tool to investigate the probabilities of winning while developing his blackjack gaming theory. He used FORTRAN to formulate the equations of his research model.
The IBM 704 at the MIT Computation Center was used as the official tracker for the Smithsonian Astrophysical Observatory Operation Moonwatch in the fall of 1957. IBM provided four staff scientists to aid Smithsonian Astrophysical Observatory scientists and mathematicians in the calculation of satellite orbits: Dr. Giampiero Rossoni, Dr. John Greenstadt, Thomas Apple and Richard Hatch.
The IBM 704 has a 38-bit accumulator, a 36-bit multiplier quotient register, and three 15-bit index registers. The contents of the index registers are subtracted from the base address, so the index registers are also called "decrement registers". All three index registers can participate in an instruction: the three-bit tag field in the instruction is a bit map specifying which of the registers participate in the operation. However, when more than one index register is selected, then their contents are or'ed – not added – together before the decrement takes place. This behavior persisted in later scientific architecture machines (such as the IBM 709 and IBM 7090) until the IBM 7094. The IBM 7094, introduced in 1962, increased the number of index registers to seven and only selected one at a time; the "or" behavior remains available in a compatibility mode of the IBM 7094.
Instruction and data formats
Type A instructions have, in sequence, a 3-bit prefix (instruction code), a 15-bit decrement field, a 3-bit tag field, and a 15-bit address field. There are conditional jump operations based on the values in the index registers specified in the tag field. Some instructions also subtract the decrement field from the contents of the index registers. The implementation requires that the second two bits of the instruction code be non-zero, giving a total of six possible type A instructions. One (STR, instruction code binary 101) was not implemented until the IBM 709.
Type B instructions have, in sequence, a 12-bit instruction code (with the second and third bits set to 0 to distinguish them from type A instructions), a 2-bit flag field, four unused bits, a 3-bit tag field, and a 15-bit address field.
- Fixed point numbers are stored in binary sign/magnitude format.
- Single precision floating point numbers have a magnitude sign, an 8-bit excess-128 exponent and a 27-bit magnitude
- Alphanumeric characters were usually 6-bit BCD, packed six to a word.
The instruction set implicitly subdivides the data format into the same fields as type A instructions: prefix, decrement, tag and address. Instructions exist to modify each of these fields in a data word without changing the remainder of the word though the Store Tag instruction was not implemented on the IBM 704.
The original implementation of Lisp uses the address and decrement fields to store, respectively, the head and tail of a linked list. The primitive functions car ("contents of the address part of register") and cdr ("contents of the decrement part of register") were named after these fields.
Memory and peripherals
Controls are included in the 704 for: one 711 Punched Card Reader, one 716 Alphabetic Printer, one 721 Punched Card Recorder, five 727 Magnetic Tape Units and one 753 Tape Control Unit, one 733 Magnetic Drum Reader and Recorder, and one 737 Magnetic Core Storage Unit. Weight: about 19,466 pounds (9.7 short tons; 8.8 t).
The 704 itself came with a control console which has 36 assorted control switches or buttons and 36 data input switches, one for each bit in a register. The control console essentially allows only setting the binary values of the registers with switches and seeing the binary state of the registers displayed in the pattern of many small neon tubes, appearing much like modern LEDs. For human interaction with the computer, programs would be entered on punched cards initially rather than at the console, and human-readable output would be directed to the printer.
The IBM 740 Cathode Ray Tube Output Recorder was also available, which is a 21-inch vector display with a very long phosphor persistence time of 20 seconds for human viewing, together with a 7-inch display receiving the same signal as the larger display but with a fast-decaying phosphor brightness designed to be photographed with an attached camera.
- "704 Data Processing System". IBM Archives - Exhibits - IBM Mainframes - Mainframes reference room - Mainframes product profiles. IBM. Retrieved 2016-08-18.
- "IBM Electronic Data-Processing Machines TYPE 704" (PDF). IBM 704 Manual of Operation. International Business Machines Corporation. 1955. Retrieved 2017-12-28.
- Pesce, Mark (26 Feb 2015). "Assemblers were once people: My aunt did it for NASA". Software - Developer. The Register. Retrieved 2016-08-18.
- "History of IBM Timeline". IBM. Retrieved 2019-07-04.
- http://www-formal.stanford.edu/jmc/history/lisp/node2.html LISP Prehistory, John McCarthy, 1996
- Arthur C. Clarke online Biography Archived 1997-12-11 at the Wayback Machine
- Bell Labs: Where "HAL" First Spoke (Bell Labs Speech Synthesis website) Archived 2014-04-01 at the Wayback Machine
- Discovery channel documentary with interviews by Ed and Vivian Thorp
- Levinger, Jeff (February 10, 1961). "Math Instructor Programs Computor: Thorpe, 704 Beat Blackjack" (PDF). The Tech. Cambridge, MA: Massachusetts Institute of Technology. 81 (1): 1.
- Kaisler, Stephen H. (Nov 2018). First Generation Mainframes: The IBM 700 Series. Cambridge Scholars Publishing. p. 69. ISBN 978-1-5275-0650-3. Retrieved Apr 25, 2019.
- IBM 7094 Principles of Operation (PDF), IBM Systems Reference Library (fifth ed.), IBM, 1962, p. 8, A22-6703-4
- John Savard. "From the IBM 704 to the IBM 7094". Retrieved 2009-11-15. Cite journal requires
- McCarthy, John (1960). "Recursive Functions of Symbolic Expressions and Their Computation by Machine, Part I". Retrieved 2009-02-14. Cite journal requires
|journal=(help) p. 28.
- Weik, Martin H. (March 1961). "IBM 704". ed-thelen.org. A Third Survey of Domestic Electronic Digital Computing Systems.
- Weik, Martin H. (December 1955). "IBM-704". ed-thelen.org. A Survey of Domestic Electronic Digital Computing Systems.
- "IBM Archives: 704 Cathode Ray Tube Output Recorder". Retrieved 10 December 2012.
- "IBM Archives: IBM 737 Magnetic core storage unit". Retrieved 10 December 2012.
|Wikimedia Commons has media related to IBM 704.|
- Oral history interview with Gene Amdahl Charles Babbage Institute, University of Minnesota, Minneapolis. Amdahl discusses his role in the design of several computers for IBM including the STRETCH, IBM 701, and IBM 704. He discusses his work with Nathaniel Rochester and IBM's management of the design process for computers.