Euler's laws of motion
In classical mechanics, Euler's laws of motion are equations of motion which extend Newton's laws of motion for point particle to rigid body motion. They were formulated by Leonhard Euler about 50 years after Isaac Newton formulated his laws.
|Part of a series of articles about|
Euler's first law
Internal forces between the particles that make up a body do not contribute to changing the total momentum of the body as there is an equal and opposite force resulting in no net effect. The law is also stated as:
where acm = dvcm/ is the acceleration of the centre of mass and F = dp/ is the total applied force on the body. This is just the time derivative of the previous equation (m is a constant).
Euler's second law
Euler's second law states that the rate of change of angular momentum L (sometimes denoted H) about a point that is fixed in an inertial reference frame (often the mass center of the body), is equal to the sum of the external moments of force (torques) acting on that body M (also denoted τ or Γ) about that point:
Note that the above formula holds only if both M and L are computed with respect to a fixed inertial frame or a frame parallel to the inertial frame but fixed on the center of mass. For rigid bodies translating and rotating in only two dimensions, this can be expressed as:
where rcm is the position vector of the center of mass with respect to the point about which moments are summed, α is the angular acceleration of the body about its center of mass, and I is the moment of inertia of the body about its center of mass. See also Euler's equations (rigid body dynamics).
Explanation and derivation
The distribution of internal forces in a deformable body are not necessarily equal throughout, i.e. the stresses vary from one point to the next. This variation of internal forces throughout the body is governed by Newton's second law of motion of conservation of linear momentum and angular momentum, which for their simplest use are applied to a mass particle but are extended in continuum mechanics to a body of continuously distributed mass. For continuous bodies these laws are called Euler's laws of motion. If a body is represented as an assemblage of discrete particles, each governed by Newton's laws of motion, then Euler's equations can be derived from Newton's laws. Euler's equations can, however, be taken as axioms describing the laws of motion for extended bodies, independently of any particle distribution.
where b is the force acting on the body per unit mass (dimensions of acceleration, misleadingly called the "body force"), and dm = ρ dV is an infinitesimal mass element of the body.
Body forces and contact forces acting on the body lead to corresponding moments (torques) of those forces relative to a given point. Thus, the total applied torque M about the origin is given by
where MB and MC respectively indicate the moments caused by the body and contact forces.
Thus, the sum of all applied forces and torques (with respect to the origin of the coordinate system) acting on the body can be given as the sum of a volume and surface integral:
Let the coordinate system (x1, x2, x3) be an inertial frame of reference, r be the position vector of a point particle in the continuous body with respect to the origin of the coordinate system, and v = dr/ be the velocity vector of that point.
Euler's first axiom or law (law of balance of linear momentum or balance of forces) states that in an inertial frame the time rate of change of linear momentum p of an arbitrary portion of a continuous body is equal to the total applied force F acting on that portion, and it is expressed as
Euler's second axiom or law (law of balance of angular momentum or balance of torques) states that in an inertial frame the time rate of change of angular momentum L of an arbitrary portion of a continuous body is equal to the total applied torque M acting on that portion, and it is expressed as
Where is the velocity, the volume, and the derivatives of p and L are material derivatives.
- McGill and King (1995). Engineering Mechanics, An Introduction to Dynamics (3rd ed.). PWS Publishing Company. ISBN 0-534-93399-8.
- "Euler's Laws of Motion". Retrieved 2009-03-30.
- Rao, Anil Vithala (2006). Dynamics of particles and rigid bodies. Cambridge University Press. p. 355. ISBN 978-0-521-85811-3.
- Gray, Gary L.; Costanzo, Plesha (2010). Engineering Mechanics: Dynamics. McGraw-Hill. ISBN 978-0-07-282871-9.
- Ruina, Andy; Rudra Pratap (2002). Introduction to Statics and Dynamics (PDF). Oxford University Press. p. 771. Retrieved 2011-10-18.
- Lubliner, Jacob (2008). Plasticity Theory (Revised Edition) (PDF). Dover Publications. pp. 27–28. ISBN 0-486-46290-0. Archived from the original (PDF) on 2010-03-31.