A braille translator is a software program that translates a script into braille and sends it to a braille embosser, which produces a hard copy of the original print text. Only the script is transformed, not the language.
For the purposes of this article, the word "inkprint" means text prepared for reading by the eye, whether printed, displayed on a screen, or stored in a computer; "braille" means text prepared for reading by the finger, whether brailled, displayed on an electronic device, or stored in a computer.
Braille translation software or embedded hardware converts inkprint into braille or braille into inkprint. Usually someone has inkprint in a word processor file or at an URL and wants braille. The braille could be sent to a braille embosser to produce physical braille or to an electronic notetaker. Another circumstance is that someone has braille in an electronic braille notetaker that they want to produced in inkprint to be shared with someone who does not read braille.
Braille translation software is usually classified as assistive technology, since the action of the software provides braille for a blind person. Braille translators can be run by people with or without sight.
Some languages use uncontracted braille, where each letter uses a specific braille character. Uncontracted braille requires manipulation of capitalization, emphasis, numbers, and punctuation. Some languages use contracted braille, where the rules for various braille abbreviations are quite complex. For example, in contracted English braille, the word think (5 letters) is rendered as 3 characters: ⠹⠔⠅(th)(in)k. The use or non-use of these contractions is related to pronunciation. For example, the "th" sign is used in think, but not pothole. Unless properly programmed, a computer might make a mistake that no person would make, such as using the contraction for mother in the word chemotherapy. The most difficult part of producing braille is making the decision of when and when not to use contractions. When people make these decisions it is braille transcription; when computers make these decisions it is braille translation.
The first practical application of computer translation and production of braille used mainframe computers at the American Printing House for the Blind of Louisville, Kentucky.
During the 1960s, there was an MIT project to automate the production of braille. Robert Mann wrote and supervised software for braille translation called DOTSYS, while another group created an embossing device which became known as the "M.I.T. Braillemboss.". Eventually, MIT outsourced the software work to Mitre Corporation. The Mitre Corporation team of Robert Gildea, Jonathan Millen, Reid Gerhart and Joseph Sullivan (now president of Duxbury Systems) developed DOTSYS III, the first braille translator written in a portable programming language. DOTSYS III was developed for the Atlanta Public Schools as a public domain program.
- Support for wireless braille displays in iOS 5, Apple Accessibility retrieved 3/29/2012
- Robobraille (server-based braille software) retrieved 3/29/2012
- Braille Translation System for the IBM 704 by Ann S. Schack and R.T. Mertz, 1961 retrieved 3/30/2016
- Computer Translation: Grade 2 from Print; Report of American Printing House of the Blind, by Ann Schack, et al., June 1969 retrieved 3/30/2016
- Robert W. Mann, Sc.D., Selected Perspectives on a Quarter Century of Rehabilitation Engineering, Journal of Rehabilitation Research, and Development Vol. 23 No. 4, Pages 1-6 retrieved 3/30/2016
- History of Duxbury Systems, retrieved 3/29/2012
- Computerised Braille Production Proceedings of the First International Workshop in Münster Germany, 1973 edited by R. A. J. Gildea, G. Hubner, H. Werner, 1974 retrieved 3/30/2016
- Documents on Automated Braille Production: An Historical Resource retrieved 3/30/2016