Port (computer networking)
In computer networking, a port is a communication endpoint. Physical as well as wireless connections are terminated at ports of hardware devices. At the software level, within an operating system, a port is a logical construct that identifies a specific process or a type of network service. Ports are identified for each protocol and address combination by 16-bit unsigned numbers, commonly known as the port number. The most common protocols that use port numbers are the Transmission Control Protocol (TCP) and the User Datagram Protocol (UDP).
A port number is always associated with an IP address of a host and the protocol type of the communication. It completes the destination or origination network address of a message. Specific port numbers are commonly reserved to identify specific services, so that an arriving packet can be easily forwarded to a running application. For this purpose, the lowest numbered 1024 port numbers identify the historically most commonly used services, and are called the well-known port numbers. Higher-numbered ports are available for general use by applications and are known as ephemeral ports.
When used as a service enumeration, ports provide a multiplexing service for multiple services or multiple communication sessions at one network address. In the client–server model of application architecture multiple simultaneous communication sessions may be initiated for the same service.
A port number is a 16-bit unsigned integer, thus ranging from 0 to 65535. For TCP, port number 0 is reserved and cannot be used, while for UDP, the source port is optional and a value of zero means no port. A process associates its input or output channels via an Internet socket, which is a type of file descriptor, with a transport protocol, an IP address, and a port number. This is known as binding, and enables the process to send and receive data via the network. The operating system's networking software has the task of transmitting outgoing data from all application ports onto the network, and forwarding arriving network packets to processes by matching the packet's IP address and port number. For TCP, only one process may bind to a specific IP address and port combination. Common application failures, sometimes called port conflicts, occur when multiple programs attempt to use the same port number on the same IP address with the same protocol.
Applications implementing common services often use specifically reserved well-known port numbers for receiving service requests from clients. This process is known as listening, and involves the receipt of a request on the well-known port and establishing a one-to-one server-client dialog, using the same local port number. Other clients may continue to connect to the listening port; this works because a TCP connection is identified by a tuple consisting of the local address, the local port, the remote address, and the remote port. The well-known ports are defined by convention overseen by the Internet Assigned Numbers Authority (IANA). The core network services, such as the World Wide Web, typically use well-known port numbers. In many operating systems special privileges are required for applications to bind to these ports, because these are often deemed critical to the operation of IP networks. Conversely, the client end of a connection typically uses a high port number allocated for short term use, therefore called an ephemeral port.
Common port numbers
IANA is responsible for the global coordination of the DNS Root, IP addressing, and other Internet protocol resources. This includes the registration of commonly used port numbers for well-known Internet services.
The port numbers are divided into three ranges: the well-known ports, the registered ports, and the dynamic or private ports.
|20||File Transfer Protocol (FTP) Data Transfer|
|21||File Transfer Protocol (FTP) Command Control|
|22||Secure Shell (SSH) Secure Login|
|23||Telnet remote login service, unencrypted text messages|
|25||Simple Mail Transfer Protocol (SMTP) E-mail routing|
|53||Domain Name System (DNS) service|
|67, 68||Dynamic Host Configuration Protocol (DHCP)|
|80||Hypertext Transfer Protocol (HTTP) used in the World Wide Web|
|110||Post Office Protocol (POP3)|
|119||Network News Transfer Protocol (NNTP)|
|123||Network Time Protocol (NTP)|
|143||Internet Message Access Protocol (IMAP) Management of digital mail|
|161||Simple Network Management Protocol (SNMP)|
|194||Internet Relay Chat (IRC)|
|443||HTTP Secure (HTTPS) HTTP over TLS/SSL|
The registered ports are those from 1024 through 49151. IANA maintains the official list of well-known and registered ranges. The dynamic or private ports are those from 49152 through 65535. One common use for this range is for ephemeral ports.
Transport layer protocols, such as the Transmission Control Protocol (TCP) and the User Datagram Protocol (UDP), transfer data using protocol data units (PDUs). For TCP, the PDU is a segment, and a datagram for UDP. Both protocols use a header field for recording the source and destination port number. The port numbers are encoded in the transport protocol packet header, and they can be readily interpreted not only by the sending and receiving computers, but also by other components of the networking infrastructure. In particular, firewalls are commonly configured to differentiate between packets based on their source or destination port numbers. Port forwarding is an example application of this.
The practice of attempting to connect to a range of ports in sequence on a single computer is commonly known as port scanning. This is usually associated either with malicious cracking attempts or with network administrators looking for possible vulnerabilities to help prevent such attacks. Port connection attempts are frequently monitored and logged by computers. The technique of port knocking uses a series of port connections (knocks) from a client computer to enable a server connection.
An example for the use of ports is the Internet mail system. A server used for sending and receiving email generally needs two services. The first service is used to transport email to and from other servers. This is accomplished with the Simple Mail Transfer Protocol (SMTP). The SMTP service application usually listens on TCP port 25 for incoming requests. The second service is usually either the Post Office Protocol (POP) or the Internet Message Access Protocol (IMAP) which is used by e-mail client applications on users' personal computers to fetch email messages from the server. The POP service listens on TCP port number 110. Both services may be running on the same host computer, in which case the port number distinguishes the service that was requested by a remote computer, be it a user's computer or another mail server.
While the listening port number of a server is well defined (IANA calls these the well-known ports), the client's port number is often chosen from the dynamic port range (see below). In some applications, the clients and the server each use specific port numbers assigned by the IANA. A good example of this is DHCP in which the client always uses UDP port 68 and the server always uses UDP port 67.
Use in URLs
Port numbers are sometimes seen in web or other uniform resource locators (URLs). By default, HTTP uses port 80 and HTTPS uses port 443, but a URL like http://www.example.com:8080/path/ specifies that the web browser connects instead to port 8080 of the HTTP server.
The concept of port numbers was established by the early developers of the ARPANET in informal co-operation of software authors and system administrators.
The term port number was not yet used at this time. It was preceded by the use of the term socket number in the early development stages of the network. A socket number for a remote host was a 40-bit quantity. The first 32 bits were similar to today's IPv4 address, but at the time the most-significant 8 bits were the host number. The least-significant portion of the socket number (bits 33 through 40) was an entity called Another Eightbit Number, abbreviated AEN. Today, network socket refers to a related but distinct concept, namely the internal address of an endpoint (used within the node only).
On March 26, 1972, Vint Cerf and Jon Postel called for documenting the then-current usages and establishing a socket number catalog in RFC 322. Network administrators were asked to submit a note or place a phone call, "describing the function and socket numbers of network service programs at each HOST".
This catalog was subsequently published as RFC 433 in December 1972 and included a list of hosts and their port numbers and the corresponding function used at each host in the network. This first registry function served primarily as documentation of usage and indicated that port number usage was conflicting between some hosts for "useful public services".
The document promised a resolution of the conflicts based on a standard that Postel had published in May 1972 in RFC 349, in which he first proposed official assignments of port numbers to network services and suggested a dedicated administrative function, which he called a czar, to maintain a registry.
The 256 values of the AEN were divided into the following ranges:
|Port number range||Assignment|
|0 through 63||network-wide standard functions|
|64 through 127||host-specific functions|
|128 through 239||reserved for future use|
|240 through 255||any experimental function|
The Telnet service received the first official assignment of the value 1. In detail, the first set of assignments was:
|5||Remote job entry|
In the early ARPANET, the AEN was also called a socket name, and was used with the Initial Connection Protocol (ICP), a component of the Network Control Program (NCP). NCP was the forerunner of the modern Internet protocols. Today the terminology service name is still closely connected with port numbers, the former being text strings used in some network functions to represent a numerical port number.
- Postel, John. "RFC 793". Retrieved 29 June 2012.
- Michelle Cotton; Lars Eggert; et al. (August 2011). Internet Assigned Numbers Authority (IANA) Procedures for the Management of the Service Name and Transport Protocol Port Number Registry. IETF. doi:10.17487/RFC6335. BCP 165. RFC 6335.
- "Port Numbers". Internet Assigned Numbers Authority (IANA).
- RFC 36, Protocol Notes, S. Crocker (16 March 1970)
- RFC 433, Socket number list, J. Postel, N. Neigus (22 December 1972)
- RFC 322, Well Known Socket Numbers, V. Cerf, J. Postel (26 March 1972)
- RFC 349, Proposed Standard Socket Numbers J. Postel (30 May 1972)
- RFC 197, Initial Connection Protocol--Reviewed, A. Shoshani, E. Harslem (14 July 1971)
- NIC 7104, ARPANET Protocol Handbook
- Postel, Jon; Feinler, E. (1978). ARPANET Protocol Handbook. Menlo Park, CA: Network Information Center.